Products in Oil, Gas & Mining: Silicones

XIAMETER(TM) PMX-200 Silicone Fluid 600,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

XIAMETER(TM) PMX-200 Silicone Fluid 500,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

ELASTOSIL® SUB C 2002 A/B is a two-component, low-viscosity, addition-curing silicone rubber specifically developed for deep-sea applications. It is designed to maintain flexibility in extreme temperature conditions, ranging from -40 °C to +180 °C. This silicone rubber is particularly well-suited for manufacturing various types of thermal insulation devices. Its low viscosity allows for easy flow and application.

SILFOAM® SD 986 is an antifoam solution with a low viscosity that incorporates a small amount of highly viscous silicone fluid. The presence of dimethylpolysiloxane in SILFOAM® SD 986 provides effective defoaming properties in various mineral oil products and non-aqueous systems. This is attributed to its low surface tension and excellent spreading ability, enabling efficient foam control.

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

ELASTOSIL® SUB C 2000 A/B is a two-component silicone rubber specifically developed for deep-sea applications. It is a pourable material that undergoes addition curing. This silicone rubber exhibits flexibility at both low temperatures (-40 °C) and high temperatures (+180 °C). It has a low viscosity, making it ideal for the manufacturing of various thermal insulating devices.

Wacker Chemie SG 3379 is a polyalkylene oxide modified polydimethylsiloxane with organofunctional groups located in pendant position. It finds suitability in various applications, such as coating, to enhance coefficient of friction and leveling properties. Due to its low surface tension, SG 3379 can provide excellent wetting capabilities while improving lubricity, sheen, gloss, anti-caking, static suppression, antifoaming, and moderate profoaming properties.

Wacker Chemie SG 3378 is a polyalkylene oxide-modified polydimethylsiloxane with organofunctional groups in the pendant position. This product is highly versatile and suitable for various applications, such as coatings to improve coefficient of friction and leveling properties. It has a low surface tension, offering high wetting properties while enhancing lubricity, sheen, gloss, anti-caking, static suppression, and moderate profoaming. It also demonstrates surfactancy properties, which can be beneficial in numerous other end applications. SG 3378 is 100% concentrated, cost-effective, and has low toxicity.

SILFOAM® SE 4260 is a silicone antifoam emulsion specifically designed for use in cold climates. It exhibits exceptional frost stability and can be applied at temperatures below 0°C. This versatile product finds application in various industries, with a particular focus on the oil and gas sector for drilling fluids. SILFOAM® SE 4260 serves as an internal antifoam agent in drilling fluids to effectively control foam. Additionally, it can be used as a defoamer for on-demand additions.

Wacker Chemie SG 3382 is a polyalkylene oxide-modified polydimethylsiloxane with organofunctional groups in pendant position. It is suitable as an additive in coatings to enhance coefficient of friction and leveling properties. This product has low surface tension, making it an effective wetting agent. Additionally, it provides lubricity, sheen, gloss, anti-caking, static-suppressing, antifoaming, and moderate profoaming properties. SG 3382 is a 100% concentrated and economical solution with low toxicity.

Wacker Chemie SG 3383 is a polyalkylene oxide-modified polydimethylsiloxane with organofunctional groups positioned as pendants. Due to its unique structure, SG 3383 demonstrates excellent surface activity. It can be utilized in both aqueous and non-aqueous systems. SG 3383 finds particular suitability in various applications, including coatings to enhance coefficients of friction and leveling properties.

Wacker Chemie SG 3380 is a 100% polysiloxane polyethylene glycol copolymer and a trisiloxane superwetting molecule with organofunctional groups at the terminal positions and hydroxyl end-capping. Due to its unique structure, SG 3380 exhibits high surface activity and effectively spreads on nearly any surface. It reduces the surface tension of aqueous and non-aqueous solutions and acts as a highly effective wetting agent.

CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications

CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

Harcros Chemicals Antifoam AF 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. This product is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam 8810 Industrial Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 8830 Industrial Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

ACCESS® SF 12,500 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 12,500 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 10,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 10,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 30,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 30,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 60,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 60,000 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions. This high viscosity fluid is suitable for use in applications that require a thicker lubricant film.

CGSTAPE - 6558 is a glass cloth tape with a high-temperature thermosetting silicone adhesive. This tape shows excellent dielectric insulation properties and high heat resistant, widely used for electrical insulation for electrical equipment in the fields of petroleum drill- ing, such as motors.

AGITAN DF 6421 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily dispersable in most organic solvents

ANTIFOAM 30L is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

ANTIFOAM 10 FG is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

ANTIFOAM 10 is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.

ANTIFOAM 20 FG is Silicone Emulsion Defoamers. Defoamers fit into all major chemical markets and meet a wide variety of application needs. We manufacture the base ingredients that make up these defoamers, which allow us to be very low cost producer.