Products in Military & Defense: Aramid (Kevlar)

Para-aramid fabrics 5328 is a balanced plain weave fabric.

NOM-0960-24-D is a aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from meta-aramid paper and coated with a heat resistant phenolic resin.

Twaron® staple fiber is suitable for the most common spinning processes, such as the cotton-spinning system or the Dref system, as well as non-woven processes, such as needle-felt or hydro entanglement.

Plascore Aramid Fiber PN1-1/8-3.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Twaron® short-cut fiber can raise the performance of a wide range of products, including rubber compounds and engineered plastics.

Plascore Aramid Fiber PN1-1/8-4.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Rock West Composites NOM-0085-11-D is a Aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Teijinconex® TF B Industrial felt, inner liner of protective clothing.

Kevlar® KM2+ 768 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

U681 is an advanced para-aramid unidirectional material for hard armor ballistic applications. U681 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction.

UA-04-P is a Aramid fiber have one of the highest strength to weight ratio compared to other commercially available fibers. Aramid fiber properties depend on the manufacturing process and can vary quite a lot depending on the intended end use.

Para-aramid fabrics 5770 is a balanced plain weave fabric.

Twaron® 2200 5352 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

Kevlar® KM2+ 767 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

Teijinconex® Neo Dyeable Fiber is a natural cluster of easily dyeable meta-aramid fibers that add value to protective apparel by enabling excellent dyeability.

UA-05-P is a Aramid fiber have one of the highest strength to weight ratio compared to other commercially available fibers. Aramid fiber properties depend on the manufacturing process and can vary quite a lot depending on the intended end use.

Plascore PN1 Aramid Fiber -3/16-3.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

BarrFlexTM U650 is an advanced para-aramid unidirectional material for soft armor ballistic applications. BarrFlexTM U650 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix.

NOM-0460-24-D is a aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from meta-aramid paper and coated with a heat resistant phenolic resin.

Teijinconex® TB Spun yarn for mechanical rubber goods, protective clothing, industrial belts.

Plascore Aramid Fiber PN1-1/8-5.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

NOM-0710-24-D is a aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from meta-aramid paper and coated with a heat resistant phenolic resin.

Plascore Aramid Fiber PN1-1/8-6.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

BarrFlexTM U600 is an advanced para-aramid unidirectional material for softarmor ballistic applications. Barrday BarrFlexTM U600 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Thermoplastic film is laminated to the top and botom surfaces for abrasion resistance. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct

Twaron® 2200 5353 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

BarrFlexTM U471 is an advanced para-aramid unidirectional material for hard armor ballistic applications. Barrday BarrFlexTM U471 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Each layer is individually constructed within a resin matrix. The resin matrix retains stability at elevated temperatures while the product maintains structural integrity after ballistic event. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct.

U561 is an advanced para-aramid unidirectional material for hard armorballistic applications. U561 consists of two plies of unidirectionalproduct, cross-plied in 0°/90° confguration. Each layer is individually con-structed within a resin matrix using Barrday's proprietary UD technologyto align the fibers in a parallel direction. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct.

A-WEAVE 440P G is a 0°/90° 440 gsm aramid fabric. This reinforcement is used in ballistic applications.

U611 is an advanced para-aramid unidirectional material for softarmor ballistic applications. U611 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Thermoplastic film is laminated to the top and bottom surfaces for abrasion resistance.

Rock West Composites NOM-0335-24-D is a Aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Para-aramid fabrics 5281 is a balanced plain weave fabric.

Rock West Composites NOM-0210-50100-D is a Aerospace grade aramid fiber honeycomb that exhibits outstanding flammability properties. It is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Hybrid Carbon / Kevlar® 3210 is a balanced plain weave fabric.

Teijinconex® HT B Sewing thread, mechanical rubber goods (automotive hose, belt).

Kevlar® 29 745 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.

Kevlar® 129 720 provides phenomenal ballistic and blunt trauma protection. It is used for ballistic protection, high strength composites, and wear and resistant. It is also used in military and civilian protection applications. Kevlar® fabrics fully certifiable to AMS-3902 and BMS 8-381 for use in aerospace applications.