Products in Textile Manufacturing: Abrasion Resistant

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

GLAMIDE® T-656E is a Polyamide 66 (Nylon 66) product. It is available in North America.Characteristics include: Flame Rated Wear Resistant

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Rubaloy RA - 75 is a polymer blend of specially selected polymers viz. High Nitrile and pretreated Poly Vinyl Chloride resin. This highly fuel resistant (Fuel 'C' and Fuel 'D') blend is an excellent replacement for conventionally used speciality Synthetic Rubbers for high oil, fuel, sour gas, heat, ozone, weather aging and lead free petrol resistance. It has a low die swell property for Extrusions and Calendaring.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Domamid® 6G35 is polyamide 6, 35% glass fiber reinforced, is used for injection molding.

Apcoflex® N385 is a cold polymerized, high ACN containing acrylonitrile butadiene co-polymer. It contains non-staining antioxidant.

Apcoflex® N386 is a cold polymerized, high ACN containing acrylonitrile butadiene co-polymer, . It contains non-staining antioxidant.

Tovo Gomma HNBR 2800 65 is a rubber composite with the trade name Hydrogenated NBR Sheet 65 ShA.

Rubaloy RA - 703G is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved extrusion rate, extrusion, molding and surface finish. Rubaloy-703G is Pthalate free.

FILAVA™ MECY BSB3.7 320-80(10) Z30 IS65T CS03E are strands of continuous filaments made of enhanced mineral volcanic rock (aggregated and enriched batch) twisted in the yarns. The constituent strands or rovings are treated with “by-matrices or by-process” tailor made sizing system for excellent downstream treatment and transformation’s performance as well for high adherence to matrices in composites.

Tovo Gomma NR/SBR 1507 is a rubber composite with the trade name Economic Natural Rubber used for various applications.

Domamid® 6G25 is polyamide 6, 25% glass fiber reinforced, is used for injection molding.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Domamid® 6B30 is polyamide 6, has 30% glass beads, is used for injection molding.

Rubaloy RA - 4465 is a blend of specially selected polymers viz. Ultra high Acrylonitrile Butadiene Rubber (44% ACN Content) and pre-treated Poly Vinyl Chloride resin. This highly fuel resistant (Fuel 'A', 'B' and 'C') blend is an excellent replacement for conventionally used specialty Synthetic Rubbers. This grade is Pthalate free amd has improved flexibility as well as abrasion resistance. It has excellent color fastness and very low permeability; it has a low die swell property for Extrusions and Calendaring.

Grupa Azoty S.A Tarnamid® T-27 MCS V2 is a Polyamide 6 (Nylon 6) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MCS V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable

PermaFelx® 75 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

NEOSTATIC® Antistatic Spray is Suitable for the antistatic treatment of plastics, Special feasibility for inclusion into EPS, Reduces electrostatic charging on plastic surfaces by reducing the surface resistance to 108 – 109 Ohm. It has Excellent coverage – only 4-6 mg of agent required per m² .it is also effective at extremely low air humidity (20% r.h.). It has Long-term effect of at least 1 year – on dry plastic surfaces protected against abrasion. Physiologically harmless and therefore approved for foodstuffs packaging . It is Environmentally friendly, biologically degradable into natural substances.

Domamid® 6G45 is polyamide 6, 45% glass fiber, is used for injection molding.

Domamid® 6M30 is polyamide 6, 30% mineral filler, is used for injection molding.

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

AH290 is a Ground ATH is used in Yarn, Mills, SMC.

Tovo Gomma IIR 8060 60 is a rubber composite with the trade name butyl sheet 60 ShA3.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

Domamid® 6B40 is polyamide 6, 40% glass beads, is used for injection molding.

Domamid® 6G50 is polyamide 6, 50% glass fiber reinforced, is used for injection molding.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Tovo Gomma NR/BR 1002 is a rubber composite with the trade name Super abrasion resistant sheet and have Anti-abrasive propety.

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

OpaLene LL E2507 is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.

Rubaloy RA - 7380 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Oil Swelling and Processibility.

Tovo Gomma CR 3300 60 is a rubber compound which has a trade name flame resistant chloroprene sheet 6.

NEOSTATIC® Antistatic HB 155 is Suitable for the antistatic treatment of plastics, Special feasibility for inclusion into EPS, Reduces electrostatic charging on plastic surfaces by reducing the surface resistance to 108 – 109 Ohm. It has Excellent coverage – only 4-6 mg of agent required per m² .it is also effective at extremely low air humidity (20% r.h.). It has Long-term effect of at least 1 year – on dry plastic surfaces protected against abrasion. Physiologically harmless and therefore approved for foodstuffs packaging . It is Environmentally friendly, biologically degradable into natural substances.