Products in Industrial: Wear Resistant

Seast 116HM is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

On the basis of the activated anionic reaction LiNNOTAMHiPERFORMANCE 1200 Manufactured using the pressureless free-standing casting process. The process creates a high-molecular, highly crystalline and largely stressfree material with very good Wear resistance and dimensional stability

Vertec™ 1006 is a carbon fiber filled PTFE (polytetrafluorethylene) material. It exhibits improved creep and wear resistance. Increased thermal conductivity and low coefficient of friction ensure low wear rate even under dry running conditions. It is suitable for gaskets, valve seals, packings, bearings, and piston rings.

PEKTRON PEEK 1000 has high elongation, is ductile with no springing issues, and has great impact strength.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Advanced Laser Materials (ALM) PA 615 GS is a 50% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA. Drop-in replacement for other commercially available 50% glass sphere filled PA 12 laser sintering powders. PA 615 is more recyclable, produces a better part surface finish, and the dry powder flow has been optimized.

BARLOG plastics GmbH Kebablend® / WR 01/1125/2110 is a special compound based on POM that combines high strength and rigidity with good sliding behavior and high wear resistance.

Titacon® CF910 is a 10％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH.

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

Compared to virgin Manifattura Cattaneo PA 6.6 30% GF glass fiber reinforced polyamide exhibits improved mechanical strength, stiffness, dimensional stability and creep resistance, as well as excellent wear resistance retention and the ability to use at higher temperatures .

GERMAFORM 9 GF 25 is a polyoxymethylene (POM) copolymer material, which contains 25% glass fiber reinforced materials. This product is available in Europe.

Grupa Azoty S.A Tarflen® SM-G20 is a Polytetrafluoroethylene (PTFE) material filled with 20% graphite powder. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® SM-G20 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties

PMF® Fiber 204 BX is produced from high purity mineral ores in an electric arc furnace, the precisely designed fiber is used as a reinforcing material in a variety of composite end-uses including friction materials; quality plastics; paints; caulks; sealants, coatings and gaskets. Fibrox PMF 204 milled fiber has a fiber index greater than 95%. It boasts thermal stability, consistent uniformity and excellent tensile strength and is the perfect alternative to asbestos.

AGR 30 is a PPO Glass Filled 30%.

PAR Group Peek Carbon Filled Sheet maintains all the significant benefits of standard PEEK material such as excellent chemical and radiation resistance, high dimensional stability and high resistance to creep. The carbon fiber reinforcement helps to improve the wear properties of the material as they are typically less abrasive than the fibers used in the glass filled alternative. Carbon filled PEEK sheet is also flame retardant, self-extinguishing and electrically conductive, making for an extremely versatile material.

Essentium TPU 74D-Z is a high durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. Essentium’s Z line of filaments are the only industrially-proven safe materials for ESD sensitive applications. Essentium TPU 74D-Z is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Vapladur is a product developed with first quality polypropylene, which is used for industrial cut. It’s a very crystalline material which has a good wear resistance, high stiffness, high chemical resistance and it supports high tensile strength.

AGR 15 is a ABS Glass Filled 15%.

POM copolymer unreinforced, medium viscosity, electrically conductive

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

BARLOG plastics GmbH Kebablend® / WR XB 111001/2 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Godiplast PEEK(G) 8900G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Glass filled PEKTRON PEEK 1030 has increased strength, good creep resistance, and is not conductive.

Essentium TPU 95A-Z is a medium durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With nonmarring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Essentium TPU 95A-Z balances high elongation with impressive impact resistance and tensile strength. This filament has a low friction surface that allows for easier feeding while printing.

Efalon® Glass-filled C-15 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Smooth blend-POM-1200 is a weer resistant polyacetal compound offering superb lubricity by incorporating PTFE. It is developed for application demanding stringent wear resistant and low friction performance.

Orient Black® N550 is a low surface area and high structure fast extruding furnace grade offers moderate resilience.

ZELLAMID® 1100 is a heavy duty, high impact and chemical resistant polyamide 6 material appropriate for larger parts.

Seast 7HM is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

Grupa Azoty S.A Tarflen® DE is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® DE are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Fabrics/Fibers Hose/Tubing Plumbing/Piping/Potable Water

Flontech PTFE FT-CARR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.