Products in Industrial: Good Thermal Stability

AGC Chemicals Americas, Inc. Fluon+™ FC 433 SPL (340433001) is a 15% soft carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Soft carbon is added to PTFE to improve the wear properties, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI (310999107) is a 15% polyimide-filled PTFE product supplied in dry powder form. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 160 (310160000) is a 10% aromatic polyester filled PTFE product designed for use in billet molding. This compound is supplied in dry powder form. Aromatic polyester resin is added to improve the wear properties, thermal resistance and dimensional stability of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 474 SPL (340474062) is a 5% glass and 5% molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers and molybdenum disulfide are added to PTFE to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 105 Billet (310105580) is a 25% glass-filled, PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN SPL (340454463) is a 15% wollastonite-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 485.0 (340485000) is a bronze powder and molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder & molybdenum disulfide are added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 458 (340999102) is a polyphenylene sulfide-filled PTFE product designed for use in seal applications. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350-800 microns. Polyphenylene sulfide is added to improve the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL (340482030) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance of PTFE, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN (310154464) is a 15% wollastonite-filled PTFE product. This compound is supplied in dry powder form. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer. Additionally, wollastonite is an FDA compliant filler.

AGC Chemicals Americas, Inc. Fluon+™ FC 168 (310168002) is a glass fiber and graphite filled PTFE product. This compound is supplied in dry powder form. Glass fibers and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST (310154081) is a 50% stainless steel filled PTFE product designed for use in high wear and load-bearing applications. This compound is supplied in dry powder form and can be processed using compression molding equipment to mold thick-walled parts. Stainless steel is added to PTFE to improve wear properties and load bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 7 PI FF (340461400) is a polyimide-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, while maintaining the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 108 (310108001) is a 40% glass-filled PTFE product designed for use in gasket and seal applications. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 500 (340500000) is a PTFE product that is supplied in a round pelletized form with a size range of approximately 350 - 800 microns. It has excellent chemical and thermal resistance properties, making it suitable for various applications. Additionally, it has a high bulk density and flow properties, making it compatible with automatic molding equipment, standard design hoppers, and other bulk feeding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PPS 10 C (310999215) is a PTFE product filled with a combination of polyphenylene sulfide and carbon. It is supplied in dry powder form. The addition of polyphenylene sulfide improves the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST FF (340454082) is a 50% stainless steel-filled PTFE product. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Stainless steel is added to PTFE to improve the wear properties and load-bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 407 (340407040) is a 35% glass-filled, PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 148 (310999295) is a composite material made of PTFE, polyphenylene sulfide, and graphite. It is designed for use in seal applications and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance. This material can be processed using compression molding equipment to create thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 442 (340999443) is a polyphenylene sulfide and graphite filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The polyphenylene sulfide and graphite fillers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL II (340482045) is a PTFE product filled with a combination of bronze powder and molybdenum disulfide. It is designed for use in seal applications and is supplied in round pelletized form with a size range of 350 - 800 microns. The added fillers increase the thermal and electrical conductivity, as well as improve the wear properties and deformation resistance of the PTFE without compromising its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 111 (311111020) is a 5% molybdenum disulfide-filled PTFE product supplied in dry powder form. It improves wear properties, increases surface hardness, and decreases coefficient of friction without sacrificing chemical and thermal resistance of the polymer. This product can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 201 (310201000) is a 5% glass-filled modified PTFE product that is supplied in dry powder form. The addition of glass fibers improves the wear properties, compressive strength, hardness and creep resistance of PTFE without compromising its chemical and thermal resistance. Modified PTFE has improved creep resistance and weldability compared to regular PTFE, making it suitable for use in gasket and seal applications.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 446 (340446030) is a 60% bronze powder-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase thermal and electrical conductivity and to improve wear properties and deformation resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 444 (340444001) is a 40% bronze powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, while maintaining the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 (340482003) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 472 (330331002) is a 5% glass and 5% molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers and molybdenum disulfide are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 133 (310133002) is a 15% hard carbon-filled PTFE product supplied in dry powder form. It improves wear properties, compressive strength, and creep resistance without sacrificing chemical and thermal resistance of the polymer. It can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 10 PI (310999105) is a polyimide-filled, modified-PTFE product designed for use in seal applications. It is supplied in dry powder form and improves wear properties and abrasion resistance of PTFE in non-lubricated applications without sacrificing chemical and thermal resistance. As a result, it reduces wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 191 HE (310191030) is a 25% carbon and graphite filled PTFE product. This compound is supplied in dry powder form. Carbon and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 404 (340404031) is a PTFE compound reinforced with 20% glass fibers. This material is supplied in round pellets, with a size range of 350-800 microns. The addition of glass fibers improves the wear resistance, compressive strength, and creep resistance of PTFE, while maintaining its chemical and thermal resistance. It is designed for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 174 (310174040) is a PTFE-based material that contains 15% glass fibers and 5% molybdenum disulfide. This compound is supplied in dry powder form and can be used in seal applications. The addition of glass fibers and molybdenum disulfide improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FR 03 (330003010) is a high flow PTFE compound that contains 15% glass fibers, which are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer. This compound is supplied in round pelletized form and the pellets range in size from approximately 325 - 700 microns, making it suitable for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 103 Billet (310103012) is a 15% glass-filled PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.