Products in Industrial: Sodium Salts

PT Asahimas Chemical (ASC) Sodium Hypochlorite (NaClO) is formed when caustic soda (NaOH) and chlorine (Cl2) react. ASC delivers sodium hypochlorite to customers in the form of 10% solution.

Metal-Rec 40 is a sodium dimethyl dithiocarbamate-based formulation, that is designed to provide low-cost treatment of circuit board wastewater and other heavily chelated metal waste streams. Additional coagulants are generally required when using this product.

PMP Fermentation Products/Fuso Chemical Liquid Gluconate 70% is a unique blend of gluconic acid and sodium gluconate in an aqueous solution, having a 60 percent equivalent of sodium gluconate when neutralized with caustic soda.

Grade 50 Soda Ash is a white granular solid. It is Specialty light density with very fine particle size.

Sodium Dichromate Dihydrate are solid red, orange crystals in appearance.

Ampac Products Sodium Perchlorate Anhydrous is a white, deliquescent, orthorhombic crystal/crystalline powder. It is a strong oxidizing agent with uses in the explosives and chemical industries.

Teck Cominco Sodium Antimonate which comes under the category of industrial products and fertilizers are recovered from zinc and lead smelting operations in Trail, B.C.

Sodium n - Propylate (SNP) in n - Propanol (20%) is soluble in n-propanol and some ethers.

Weifang Ocean Fortune Chemical Sodium Nitrate is a colorless transparent or white tinged with yellow rhombic crystal, with density of 2.257 (20℃), bitter and salty in taste, slightly soluble in glycerol and ethanol, very deliquescent and much easier with small amount of sodium chloride.

Ercros Sodium chlorate is a hydrochloric acid salt. Due to its high oxidizing character and its associated high instability, it is not found in nature.

SULFOROKAnol L225/1 (Sodium Laureth Sulfate) is an anionic surfactant of the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is available as an approximately 26% aqueous solution in color from colorless to light yellow, pH close to neutral and low viscosity at room temperature. These properties make it easier to pump, dose and mix the product with other components. The microbiological purity of SULFOROKAnol L225 / 1 is ensured by the addition of a preservative.

NASIL C/3.35 is sodium silicate obtained by fusing quartz sand and sodium carbonate at high temperatures. In the solid state they are amorphous and look like glass. They dissolve in water (waterglass) to afford colloidal solutions of an alkaline nature.

PCC Chemax Caustic soda lye 35% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

Rot Quimica S A De C V Sodium Hydroxide 50% - Industrial Grade is used in the manufacture of alumina from bauxite. Additionally, it has a variety of uses in chemical manufacturing, including waste acid neutralization, pH control, caustic scrubbing of waste gasses, catalysis, and caustic stripping.

Adwan Chemical Industries, Sodium Hypochlorite- Solution –concentration 15% is a light greenish yellow colored liquid has characteristic smell. It can decompose slowly with time. The decomposition condition and speed is related to following important parameters such as hypochlorite concentration,temperature, light and Metal impurities in material.

Chem One Sodium Hexametaphosphate is our proprietary Sodium Hexametaphosphate.

MR-1000 is a blend of sulfide and organo-sulfide precipitants and organic and inorganic coagulants. Metal-Rec 1000 is a proprietary blend designed for use with direct filtration systems such as micro-filtration equipment. This product allows longer filter runs and higher throughput rates than competitive treatments. It also results in reduced filter cleaning frequency, reducing labor and extending filter life. Works great in other systems as well where a 1 drum precipitant/coagulant solution is required.

Esseco USA Decharacterized Sodium Sulfite (1CS22R) is an oxygen scavenger. It contains a decharacterizing agent that colors the the granular particles light brown.

Weifang Ocean Fortune Chemical Sodium Silicate Solid is a solid block, granular colorless or light blue liquid. It appears as colorless or slightly colored, transparent or translucent viscous liquid.

Sodium thiosulphate crystals is a The use of certain sulfur chemicals in the food industry is highly regulated. Sodium thiosulfate Crystalline is used as a cheap and effective antioxidant, vascular protection and detoxification agent for heavy metals and radioactive particles. It is also used as a drink or (foot) bath additive.

2B-5A Activated Zeolite is composed of Zeolite 5A activated, v .

Sheldon International Resist Salt are available in both Powder and Granules form.These salt can be manufactured in different grades according to the requirement of the customer. These Resist salt are used for various Textile Printing, Food Product, Intermediate for Dyes, Auxiliary Printing Fabrics, Oxidizing Agent for Electroplating, etc.

Sodium Chromate is yellow solid in appearance.

Saskatchewan Mining and Minerals Anhydrous Sodium Sulfate is Na2S04 that meets FCC Specifications, Tenth Edition, 2016. It has white granular powder appearance.

PT Asahimas Chemical (ASC) Caustic Soda (NaOH) is an essential raw material and process chemical in many industrial operations. ASC delivers Caustic Soda in 48% solution (Liquid Caustic Soda) and in solid form (Flake Caustic Soda, 98%).

SECOHYPO™ ANHYDROUS is a white granular product that is readily soluble in water.

Sodium t-Amylate(STA) (98%) is very soluble in toluene, cyclohexane, hexane, diglyme and tetrahydrofuran.

Compass Remediation Chemicals Sodium Permanganate is active oxidant is the permanganate anion (MnO₄-), is proven safe and cost-effective for many applications, including soil remediation and water treatment. Compass’ sodium permanganate is available in 20% and 40% solutions, as well as custom blended concentrations. Our permanganates are tested for trace metals to ensure we are providing only the purest sodium permanganate for your in situ remediation projects.

NASIL 45 is sodium silicate obtained by fusing quartz sand and sodium carbonate at high temperatures. In the solid state they are amorphous and look like glass. They dissolve in water (waterglass) to afford colloidal solutions of an alkaline nature.

Sodium t-Butoxide(STB) in Tetrahydrofuran(THF) (30%) is very soluble in tetrahydrofuran. It is fairly soluble in ethers and hydrocarbons.

Grade 160 Soda Ash is a white granular solid. It is Specialty dense grade low in organic content.

PENTA Chemicals Sodium acetate anhydrous A.G. (22750) appears as white crystalline substance.

BYK-155/35 is a Sodium polyacrylate-based thinner for water-based drilling fluids. This additive is not available in North America. In NAFTA please use BYK-155/50 instead, which differs only with respect to the non-volatile content.

KS No. 2 is sodium silicate. It is also the basic source material of silica derivative like silica gel, silica sol, zeolite, white Carbon.

Fujifilm Sodium Bicarbonate is a white, crystals or crystalline powder.

Natrium® 150 is used in some fire & mold restoration, wood surfaces, and applications where delicate coating removal & surface preparation with minimal substrate damage are required.