Products in Industrial: Polypropylenes (PP)

Revolve R-Tuff PP60 Conductive is a rotational molding polypropylene grade designed to provide conductivity and maintain all properties related to polypropylene such as stiffness, high temperature resistance and chemical resistance.

R103 is a Polypropylene Homopolymer produced by the Spheripol Technology R103 combines exceptional processability with Low Water Carry Over, Excellent Strength & Color R103 is recommended for Stretched Tape Raffia for Woven sacks, FIBC, Ropes & Yarns

Shandong Dawn Polymer Material Z-1800 has good processability. It is used in applications like melt blown non-woven fabric, isolating clothing, oil absorbent cotton, oil absorbent felt, industrial wiping cloth, filter cloth etc.

Guangzhou Lushan New Materials DP-1 has good stability, wide processing technology, strong adhesion with the outer PP layer, high mechanical strength and aging resistance property, etc.

Homopolymer Polypropylene (PP)

RG 1040 N is a Polypropylene Homopolymer Contains Nucleating Agent and Shows a Good FLowability and Stiffness. It is used in High Stiffness Thermoforming Applications

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PP Homopolymer Natural 50% Mineral filled

J-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

Revolve PP46 XD is a rotational molding polypropylene grade based on a new advanced technology designed to provide exceptional mouldability without compromising rigidity and strength. The grade is stabilized against thermal and light degradation and it is UV8 rated.

Gichem BG04/KM Polypropylene is PP copolymer, 20% mineral filler with very high impact resistance also with low temp. High injection speed.

Smiths Metal Centers Polypropylene PP-30GF is a high-quality general purpose engineering plastic material. Polypropylene PP-30GF is polypropylene homopolymer with 30% glass fiber.

RG 1102 L is a Polypropylene Homopolymer With General Extrusion Additivation. It is used in Extrusion and Injection Molding Applications, Raffia, Tapes, MonoFilaments, Diary Products

PP flame retarded

RG 1002 G is a Polypropylene Homopolymer With High Stiffness. It is used in High Stiffness Thermoformed Parts, Special Extrusion Applications

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.

PP Homopolymer Industrial Black 20% Talc filled

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Protec® PP chemical and corrosion resistant materials exhibit excellent tensile stiffness and mechanical properties for use in a wide variety of industrial applications.

7.9 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1508 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for fiber spinning and other critical extrusion applications.The 1508 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistant to gas fading Excellent UV stability Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

RG 1100 H is a Polypropylene Homopolymer. It is used in General Injection Molding, Closures, Caps

PP Homopolymer Industrial Black 20% Glass Fiber filled

Elastocon® 2825 thermoplastic elastomer compound has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2825 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2825 can be overmolded onto polypropylene.Elastocon® 2825 is supplied as ready to use pellets in 40 lb. bag quantities.

Elastocon® 2810 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2810 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2810 can be overmolded onto polypropylene.Elastocon® 2810 is supplied as ready to use pellets in 40 lb. bag quantities.

TABOREN® PR 65 T 10S-089 is a PP/PE, Filler: Mineral filler, Stabilization: Antioxidant + UV + Anti-scratch

POSS® MS0825 - Nanoreinforced Polypropylene utilizes POSS technology to achieve increased hydrophobicity, lower coefficient of friction and improved processability through structural control at the nanometer level.

We can supply Alkar Technology Sandwich Panel based on the polypropylene honeycomb to which glass fiber reinforced PP skins are welded. Available in natural color and black, all thicknesses are possible. Two thicknesses of skins are available which makes it possible to modify the stiffness properties.

M365 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M365 combines excellent processability with high Flow, low Cycle Time, low Warpage, good Gloss and is adequately nucleated for good Impact - Stiffness balance M365 is recommended for Injection Molded Appliance & White Goods Components, Automotive Components, Thin Walled Injection Molding (TWIM), Compounds

Topilene® R200P is a specially designed polypropylene random copolymer (PP-R, natural colored) that features excellent long-term hydrostatic pressure resistance and heat stability. It is suitable for hot & cold water supply pipes and fittings as well as radiator connecting pipes. It is the outcome of HYOSUNG's integrated bimodal polymerization and crystallization technology with advanced PP manufacturing process technique.

Syntegum 1100 ZY V0 xxx is polypropylene based compounds, filled with talc, calcium carbonate, mica, wollastonite, reinforced with glass fiber, modified with elastomers for automotive, household and textile applications. It is also available as self-extinguishing compounds (V0 or V2 class), with halogens (KX, HJ) or halogen-free (ZY).

PETOPLEN MH180 is a homopolymer polypropylene resin with medium molecular weight distribution developed for raffia applications.

Nidaplast 8FR are polypropylene honeycomb intended to serve as a core for structural sandwich panels. The nidaplast 8FR is an extruded polypropylene honeycomb with an approved halogen-free material that limits the spread of flames. (flammability according to UL94 standards: V2 classification)

M311T is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology M311T combines excellent processability with high flow, low cycle time, good Impact – Stiffness balance with high Toughness and good Gloss M311T is recommended for Injection Molded Automotive Components, Compounds, Molded Luggage & other Industrial Components

Armlen PP-1FRX is a low-combustible polypropylene. Designed for injection molding and injection molding or extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in black color.