Products in Industrial: Polyols

Petol PA 640-4 E is a polyether polyol with medium functionality, 4, obtained by propoxilation of Ethylene Diamine under catalyst conditions.

Merginol 208 is a polyol based on vegetable oil with primary and secondary hydroxyl groups. The renewable content is very high.

CA - 4010U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

WJESPOL 1100 is used improve adhesion

CA - 2510 is Applied In PU Resins, Elastomer.

ELAPOL 5020 A by Elachem is an aliphatic, 1,4-butanediol based saturated polyester polyol.

Changshu Yitong Polyurethane Product YT-3018 is regid blend polyether polyols which are used in refrigerators, refrigerated cabinets(contain no CP).

Korea PTG PTMEG-650 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Fujifilm Sucrose is a white crystalline powder, or lustrous colorless or white crystals.

POLIkol 300 (PEG-6)belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 300). The product is a colorless liquid well soluble in water, with a relatively low viscosity and freezing point below 0 °C. It is characterized by good alkali resistance and strong hygroscopic properties. In addition, it exhibits excellent dissolution capacity of the active ingredients.

Petol PS 460-5P is a polyether polyol obtained by propoxilation of propylene glycol - sorbite mixture under catalyst conditions.

EXAPOL G 375 is a glycerin based trifunctional polyol of low viscosity and low hydroxyl value.

CA - 2420 is Applied In Adhesives, PU Resins,Elastomer, PU Elastomer Fiber.

Chemax polyethylene glycols are available in a range of molecular weights which find utility as lubricants, chemical intermediates and heat transfer agents.

Chemanol Pentaerythritol - Penta is a white, odorless, free flowing crystal with a melting Point of 264 ºC.

Petol PZ 400-4G is a medium functional polyether polyol, a general-purpose standard polyol for rigid polyurethane foams used in various rigid applications (continuous and discontinuous panel production process, appliances).

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.

Changshu Yitong Polyurethane Product YT-2038 is regid blend polyether polyols which are used in planks, framed pictures and sculptures.

Changshu Yitong Polyurethane Product YT-2020P is regid blend polyether polyols which are used in flame-resisting insulation planks.

KH Neochem Americas 2,4-Diethyl-1,5-Pentanediol (PD-9) is used as raw material for polyester, urethane resin etc.

POLIkol 3000 flakes belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 3000), INCI name: PEG-60. The commercial product is available in the form of white to light yellow wax flaxes. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

Swisloyd Refined Linseed Oil is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The Linseed is broken and heated up to 70 C. With this temperature the oil can be crushed more easily out of the seed and the best quality oil for technical purpose can be reached. It is Drying oil with polymer-forming properties.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

Swisloyd Linseed Stand Oil is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The Linseed is broken and heated up to 70 C. With this temperature the oil can be crushed more easily out of the seed and the best quality oil for technical purpose can be reached. It is Drying oil with polymer-forming properties.

Swisloyd Pale Pressed Grade SL-co-pp is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

CA - 4030U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

PETOL PP 131 is a non-reactive polymer polyol with about 13% solid content and 3500 average molecular weight of standard polyol, designed for the production of enhanced load bearing flexible polyurethane slabstock foams. PETOL PP 131 is a BHT-free product and can be used both with and without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

Korea PTG PTMEG-1400 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Changshu Yitong Polyurethane Product YT-2030 is regid blend polyether polyols which are used in doors against burglary, open holes and sound absorbing fomas.

CA - 2430 is Applied In Adhesives, PU Resins,Elastomer, PU Elastomer Fiber.

EXAPOL SU 280 is sucrose sorbitol – glycerin based polyether polyol of high functionality but low hydroxyl value and low viscosity.