Products in Other Industrial Applications: Polyols

NEWPOL PE-62 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-61 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-71 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-75 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-34 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-74 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-78 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-108 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

PETOL PZ 360-4G is a medium functional polyether-polyol with low viscosity. PETOL PZ 360-4G is used especially in polyol blends with high water levels for rigid polyurethane foam applications (wood imitation, conventional insulation applications).

EXAPOL SUD 435 N is a sucrose based polyether polyol of moderate functionality and low viscosity.

Petol PA 450-4 E is a polyether polyol based on propoxilated Ethylene Diamine under catalyst conditions.

Petol PA 450-3T is an aminic polyether polyol with high reactivity, obtained by propoxilation of Triethanolamine.

Petol PZ 480-4G polyether polyol is a medium functional polyether polyol designed to obtain rigid polyurethane foams. It is used as a standard polyol for various rigid applications such as rigid block foams, pipes and panels insulation, through continuous and discontinuous processes.

PETOL PP 2725 is a reactive polymer polyol with about 25% solid content and an approximate 4700 average molecular weight of standard polyol, designed to obtain high resilience flexible polyurethane foams (HR).

EXAPOL SU 280 is sucrose sorbitol – glycerin based polyether polyol of high functionality but low hydroxyl value and low viscosity.

PETOL PP 131 is a non-reactive polymer polyol with about 13% solid content and 3500 average molecular weight of standard polyol, designed for the production of enhanced load bearing flexible polyurethane slabstock foams. PETOL PP 131 is a BHT-free product and can be used both with and without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

EXAPOL G 375 is a glycerin based trifunctional polyol of low viscosity and low hydroxyl value.

Petol PZ 400-4G is a medium functional polyether polyol, a general-purpose standard polyol for rigid polyurethane foams used in various rigid applications (continuous and discontinuous panel production process, appliances).

Petol PA 500-5D is a highly reactive aliphatic amine polyether polyol, used in blending with other polyols for the production of rigid polyurethane foams for thermal insulation applied by spraying technique (roofs, floors, ceilings) or by molding technique (refrigerators, freezers, panels). Petol PA 500-5D has an auto-catalytic activity and thus reduces the catalyst requirements. It has a good compatibility with alkanes (n-pentane, cyclopentane) and also with HCFC.

EXAPOL SU 440 N/1 is sucrose – glycerine based polyether polyol of moderate functionality and low viscosity.

Petol PS 400-4G is a medium functional polyether polyol obtained by propoxilation of glycerin -sorbite mixture under catalyst conditions.

EXAPOL SU 465 is a medium viscosity and moderate functionality sucrose – glycerin based polyether polyol. This is a general purpose polyol

PETOL PP 251 is a non-reactive polymer polyol with about 25% solid content and 3500 average molecular weight of standard polyol, designed for the production of enhanced load bearing flexible polyurethane slabstock foams. PETOL PP 251 can be used individually or blended with other polyols.

EXAPOL SU 461 B is high functionality sucrose – glycerin based polyether polyol. Due to it’s high viscosity, it can be formulated to give very one cell structure rigid polyurethane foam of higher compressive strength. It is designed to give improved cyclopentane solubility.

PETOL 36-3BR is a high reactivity capped triol, nominal 4700 molecular weight, designed for cold- cure flexible molded foams and semi-rigid foams. PETOL 36-3BR has a high content of primary hydroxyl groups and is normally used in TDI/MDI or MDI blend formulations. Because of high Eo content, the product may render opalescent, at temperatures below 30° C.

FutureSol® Refined Glycerin is a high purity, water white, viscous liquid prepared from renewable resources.

EXAFLEX 4835 is a propylene oxide and ethylene oxide based trifunctional polyol with high primary hydroxyl contain. The calibrated amount of ethylene oxide allows wider processing tolerances and thus ease in manufacturing on continuous slabstock line.

Exapol Sor 445 N is sorbitol based polyether polyol of high functionality but medium viscosity. It is also shows better cyclopentane solubility.

PETOL 46-3MB is a heteropolymer triol, nominal 3600 molecular weight designed for the manufacture of conventional, soft and super soft flexible slabstock polyurethane foams. PETOL 46-3MB is a BHT-free product that can be processed on all standard slabstock machinery.

Petol PP 451 is a non-reactive polymer polyol, with about 45% solid content and 3500 average molecular weight of standard polyol, designed to obtain enhanced load bearing flexible slabstock foams. PETOL PP 451 can be used individually or blended with other polyols.

PETOL 56-3 is a homopolymer triol, with nominal 3000 molecular weight, designed to increase the hardness of flexible foams and to produce CME (Combustion Modified Ether) flexible polyurethane foams. PETOL 56-3 is a BHT-free product that can be processed on various foam machines. PETOL 56-3 can also be used in polyol blends for rigid foams production.

EXAPOL SU 490 B is sucrose - glycerin based polyether polyol of moderate functionality and medium viscosity.

Sylvin™ 86030-82 Clear is a non-dop vinyl compound formulated for profile extrusion applications to improve stability and clarity.

Petol C 2106 is a polyol blend formulated for the manufacture of fireproofing rigid polyurethane foams, blown with water. This polyol blend includes surfactant and fireproofing agent.