Products in Chemical & Industrial Manufacturing: Good Thermal Stabil...

ALPA-LSR 140201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

ProFlex 8 is a versatile mixture of ortho and para-n-ethyl toluenesulfonamide, renowned for its broad compatibility as a plasticizer. Beyond its plasticizing capabilities, this product excels at promoting adhesion and exhibits excellent thermal stability. Its high polarity makes it particularly effective in readily plasticizing a range of materials, including nylon, various polyamides, shellac, cellulose acetate, and protein-based materials. Notably, ProFlex 8 stands out for its ability to create compounds resistant to oils, solvents, and greases, further enhancing its utility in diverse applications.

ProFlex 4 serves as a plasticizer compatible with various resins, including polyacetals, polycarbonates, polysulfones, and polyamides. Its attributes encompass enhanced low-temperature flexibility, improved finish quality, heat stability up to 80 degrees celsius, augmented shape stability through decreased water absorption, and simplified mold removal processes.

Z-NOX® 1076 is an antioxidant mainly utilized in the electrical and electronics market segment, particularly for wire and cable applications like jacketing and insulation. It falls under both polymer additives and elastomer additives categories, functioning as an antioxidant. This product is compatible with various polymers and resins including acrylics, ABS, polycarbonates, polyethylenes, polyoxymethylene, polypropylenes, polyurethanes, PVC, and polystyrenes.

SperseStab™ 2702 is a highly efficient antioxidant with a molar efficiency twice that of BHT and a significantly higher TGA. It is effective in non-color-critical adhesive applications and can be combined with other antioxidants and UV stabilizers. With its relatively high TGA, SperseStab™ 2702 can be used in a variety of applications, from PCMO to hydraulics, metalworking, and other lubricating systems. It can also be used in natural and synthetic elastomers, as well as resins and adhesives.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 158 (310999302) is a polyphenylene sulfide-filled PTFE compound designed for use in seal applications. This compound is supplied in dry powder form. Polyphenylene sulfide is added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

SperseStab™ 5153 is a mid-weight hindered amine light stabilizer with excellent permanence and compatibility with various filled systems, including carbon black, talc, CaCO3, Mg(OH)2, and others. This cost-effective product is ideal for roofing membranes, exterior packaging, and machine parts. The use of filled systems is becoming increasingly popular due to their structural, economic, and processing advantages. SperseStab™ 5153 can be used alone or in combination with other additives, including antioxidants, hindered amine light stabilizers, and UV absorbers. Other potential applications include filled nylon systems with SperseStab™ 5153 alone or in conjunction with other antioxidants.

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-730 (311100576) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and is suitable for use when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

SperseStab™ 1425 is a high-molecular-weight phenolic antioxidant containing a phosphonate located para to the phenol. This orientation provides excellent color and low gas fading in a UV-stabilized antioxidant. The calcium salt acts as a soluble catalyst, especially for the esterification of rosin esters. Additionally, SperseStab™ 1425 works as a catalyst in the solid-state polymerization of PET polymers. Other applications include polyolefins, fibers, adhesives, and lubricating oils and greases.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PPS 10 C (310999215) is a PTFE product filled with a combination of polyphenylene sulfide and carbon. It is supplied in dry powder form. The addition of polyphenylene sulfide improves the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 133 (310133002) is a 15% hard carbon-filled PTFE product supplied in dry powder form. It improves wear properties, compressive strength, and creep resistance without sacrificing chemical and thermal resistance of the polymer. It can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 407 (340407040) is a 35% glass-filled, PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 144 (310144003) is a bronze powder-filled PTFE product supplied in dry powder form. It increases thermal and electrical conductivity, improves wear properties and deformation resistance without sacrificing chemical and thermal resistance of the polymer. This product can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 10 PI (310999105) is a polyimide-filled, modified-PTFE product designed for use in seal applications. It is supplied in dry powder form and improves wear properties and abrasion resistance of PTFE in non-lubricated applications without sacrificing chemical and thermal resistance. As a result, it reduces wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 191 HE (310191030) is a 25% carbon and graphite filled PTFE product. This compound is supplied in dry powder form. Carbon and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 404 (340404031) is a PTFE compound reinforced with 20% glass fibers. This material is supplied in round pellets, with a size range of 350-800 microns. The addition of glass fibers improves the wear resistance, compressive strength, and creep resistance of PTFE, while maintaining its chemical and thermal resistance. It is designed for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST FF (340454082) is a 50% stainless steel-filled PTFE product. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Stainless steel is added to PTFE to improve the wear properties and load-bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 174 (310174040) is a PTFE-based material that contains 15% glass fibers and 5% molybdenum disulfide. This compound is supplied in dry powder form and can be used in seal applications. The addition of glass fibers and molybdenum disulfide improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 485.0 (340485000) is a bronze powder and molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder & molybdenum disulfide are added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 444 (340444001) is a 40% bronze powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, while maintaining the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 135 (310135025) is a 25% carbon-filled PTFE product supplied in dry powder form. It improves wear properties, compressive strength, and creep resistance without sacrificing chemical and thermal resistance of the polymer. It can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 168 (310168002) is a glass fiber and graphite filled PTFE product. This compound is supplied in dry powder form. Glass fibers and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 433.3 (340433300) is a 15% graphitized carbon fiber-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of graphitized carbon fibers to PTFE improves the wear properties, compressive strength, hardness, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 5 FG 5 MOLY (310231000) is a 5% glass-filled, 5% molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in dry powder form. Glass fibers & molybdenum disulfide are added to PTFE to improve the wear properties, compressive strength, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FR 03 (330003010) is a high flow PTFE compound that contains 15% glass fibers, which are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer. This compound is supplied in round pelletized form and the pellets range in size from approximately 325 - 700 microns, making it suitable for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 103 Billet (310103012) is a 15% glass-filled PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 446 (340446030) is a 60% bronze powder-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase thermal and electrical conductivity and to improve wear properties and deformation resistance, without sacrificing the chemical and thermal resistance of the polymer.