Products in Chemical & Industrial Manufacturing: Aluminum Compounds

M.M.P MMP3000 is used in slurry explosives/ ammunition/ refractories.

U.S. Specialty Color Corporation Specialty Gray NLN is a single component, water soluble dye, used to color anodized aluminum gray.

Prakash Chemicals Sodium Alumino Silicate refers to compounds which contain sodium, aluminum, silicon and oxygen, and which may also contain water. These include synthetic amorphous sodium aluminosilicate, a few naturally occurring minerals and synthetic zeolites.

Epivalence Limited Aluminum isopropoxide is Colorless crystalline solid, moisture sensitive.

AlSr10 are widely used in structure modification of hypoeutectic Aluminum Silicon foundry alloys, making them stronger, improving their mechanical properties and producing a dispersion of their porosity.

Refractory Minerals REF-Bond BMAP is a buffered mono aluminum phosphate solution. It is designed to be used in phosphate bonding or refractory plastics. BMAP contains buffers and plasticizers to improve the performance of refractory plastics and imparts superior workability along with extended shelf life.

For MAL Magyar Aluminum GROUND HYDRATES ALOLT 38AF Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ALBA 4L is a solvent-based, standard leafing aluminum paste with a fine finesse. It is recommended for roof coatings, containers, pipes, tanks, marine coatings, thermo resistant coatings, general industrial coatings, and paper coatings.

ALBA 3L is a solvent-based, standard leafing aluminum paste with a medium fine finesse. It is recommended for roof coatings, containers, pipes, tanks, marine coatings, thermo resistant coatings, and general industrial coatings.

U.S. Specialty Color Corporation Specialty Yellow 4A is a single component, water soluble dye, used to color anodized aluminum yellow, similar to yellow corn or butter.

Valimet Aluminum Silicon Powder S-25 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

AH430 is a Ground ATH is used in BMC, FRP, Pultrusion.

AH330 is a Ground ATH is used in Electronics, Glassware, Spray Up.

E10™ is an aluminum titanium chromium nitride based proprietary coating.

adaCAL B1-C enhances product properties such as strength, opacity, whiteness, brightness, and viscosity adjustment (thixotropy) Because of these characteristics, it can be used in a variety of industries such as paint, plastic, chemistry, and so on. When adaCAL B1-C is used in paint, the hiding power is increased. The desired level of whiteness is achieved. The surface smoothness is improved. The desired brightness/opacity level is specified. Scrub resistance has been improved. Density is reduced.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Ceno Technolgies ALAG 450 Powder deposits precisely controlled amounts of sliver (and other metals including gold, palladium, iridium, etc.) onto nanoparticles, thus producing highly reflective materials with the conductivity of the precious metals but without the high cost or weight. Further research has resulted in materials which can absorb electromagnetic energy instead of simply reflecting it. Please contact us directly for further details and recommendations.

MAL Magyar Aluminum GROUND HYDRATES ALOLT 8AF for Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

For MAL Magyar Aluminum GROUND HYDRATES ALOLT 50AFGround and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

AlCa6 improve the as-cast surface quality of 5000 series alloys among other several applications.

U.S. Specialty Color Corporation Specialty Violet 3D is a single component, water soluble dye, used to color anodized aluminum vivid shades of violet, similar to the African violet plant.

abcr Aluminum isopropoxide (98%) is a product belonging to the category reagent.

Toray Advanced Composites’ aluminum commercial (AAC) grade honeycomb core is manufactured from corrosionresistant 3003 alloy foil. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, aluminum honeycomb is particularly suitable as a shear carrying core in adhesively bonded sandwich panel assemblies.

Valimet AM 2024 is specifically designed for additive manufacturing. This powder is sized to eliminate fines and enhance flowability after atomization via inert gas for spherical morphology. Its particle size distributions are tailored to maximize density, improve mechanical properties and optimize printing performance while meeting stringent OEM specifications.