Products in HI&I Care: Detergency

Deriphat® 160 C is an amphoteric surfactant for cleaners sold as a 30% liquid with very good foaming power in both hard and soft water. It is stable over a broad pH range, allowing it to be used in both acidic and alkaline formulations. DERIPHAT® 160 C can be combined with cationic surfactants, which are often used as bactericides for disinfectants. Additionally, it is a strong hydrotrope with excellent water solubility over a broad pH range, even when high electrolyte concentrations are present. DERIPHAT® 160 C is also compatible with other common nonionic, anionic and cationic surfactants, although it is insoluble in water in the pH range of 2.4 to 4.2. It is also listed on the EPA’s Safer Chemical Ingredients List.

Glucopon® 225 DK is a 70% liquid short-chain APG available as a hydrotrope. It provides high foam with good primary cleaning, is unbleached and supplied as a dark liquid, and is 100% derived from renewable resources. It is very mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants while also providing excellent gloss retention with little to no streaking and excellent plastic compatibility. It is listed on the EPA's Safer Chemical Ingredients List, approved for direct release to the environment, and contains no biocide for preservation.

Glucopon® 420 UP is 100% derived from renewable resources. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention, little to no streaking, and excellent plastic compatibility. This product contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Lutensol® LA 60 is a low-foaming solubilizer and penetrating agent that can also act as a co-solvent or co-surfactant. It is commonly used for its detergency in various cleaning formulations and is useful for wetting, dispersing, emulsifying, and providing detergency.

Sokalan® HP 30 Booster is a multifunctional, alkoxylated polyethylene imine for the detergents and cleaners industry. It can be formulated into highly concentrated formulations, including liquid monodoses, providing an oily/fatty stain removal boost even at low temperatures. It is easy to formulate in liquid laundry detergent and liquid unit dose packs.

ADM Sodium Citrate Dihydrate Fine Granular (USP-NF/FCC) (042420) is derived from citric acid and is available in a free-flowing, colorless granular form. It is odorless and freely soluble in water, but insoluble in alcohol. Sodium citrate dihydrate is the most widely used emulsifying salt in sliced processed cheese products. It is commonly used as a buffering agent in combination with citric acid to provide the precise pH control required in many food and beverage applications. In meat products, it is used as an anticoagulant for fresh livestock blood and as a curing accelerator. The detergent-building and rapid biodegradability characteristics of sodium citrate enable its use as an environmentally acceptable phosphate substitute in a large variety of household cleaning products.

ADM Sodium Citrate Dihydrate Powder (USP-NF/FCC) (042440) is derived from citric acid and is available in a free-flowing, colorless powder form. It is odorless and freely soluble in water, but insoluble in alcohol. Sodium citrate dihydrate is the most widely used emulsifying salt in sliced processed cheese products. It is commonly used as a buffering agent in combination with citric acid to provide the precise pH control required in many food and beverage applications. In meat products, it is used as an anticoagulant for fresh livestock blood and as a curing accelerator. The detergent-building and rapid biodegradability characteristics of sodium citrate enable its use as an environmentally acceptable phosphate substitute in a large variety of household cleaning products.

ADM Sodium Citrate Dihydrate Granular (USP-NF/FCC) (042410) is derived from citric acid and is available in a free-flowing, colorless granular form. It is odorless and freely soluble in water, but insoluble in alcohol. Sodium citrate dihydrate is the most widely used emulsifying salt in sliced processed cheese products. It is commonly used as a buffering agent in combination with citric acid to provide the precise pH control required in many food and beverage applications. In meat products, it is used as an anticoagulant for fresh livestock blood and as a curing accelerator. The detergent-building and rapid biodegradability characteristics of sodium citrate enable its use as an environmentally acceptable phosphate substitute in a large variety of household cleaning products.

Alcosperse 747 is a patented hydrophobically modified copolymer designed for use in detergent and cleaning formulations. It can be used as a pigment dispersant in acrylic emulsion-based paint formulations to deliver efficient, reliable color production. It is especially effective for dispersing water-resistant pigments, clays and carbon black. It is an excellent choice for acrylic emulsion-based paint formulations. Alcosperse 747 Benefits Excellent pigment dispersion Outstanding color acceptance Good hydrophobic properties Watermark-resistant performance Long shelf life Alcosperse 747 Features VOC-free Low molecular weight Easy to handle and incorporate into formulations Good storage stability

Berol 611 is a low foaming NPEO-free surfactant with excellent wetting and dissolving properties at room temperature. Suitable as replacers for NP 9/NP 10 surfactants.

Petro® D-425 Liquid is a sodium salt of naphthalene sulfonate condensate (NSC). Anionic naphthalene sulphonate condensates are used as primary dispersants in paints.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Dissolvine GL Premium is an industry-leading high-activity (55%) GLDA chelating agent designed for various liquid cleaning applications, including unit dose formats. It contains constituents like glutamic acid, N-diacetic acid, and tetrasodium salt (GLDA) and is available in the form of a clear liquid.

Ethylan CPG7545 is a low foaming nonionic surfactant with good wetting power and detergency.

Alcosperse 726 is a patented hydrophobically modified copolymer developed to function as a hydrotrope and improve soil release properties. The polymer consists of carboxylated and non-carboxylated monomers with hydrophobic character, aromatic structure and high charge density. Alcosperse 726 offers multifunctional performance characteristics that provide detergency improvement, hydrotropic effects, increased cloud point of nonionic surfactants, outstanding hydrolytic stability and unprecedented surfactant compatibility.

WACKER® E 37 is a nonionic or anionic oil-in-water emulsion that contains a combination of polydimethylsiloxanes and silicone resins as its active ingredient. It can be easily incorporated into cold-stirred formulations. The primary applications of WACKER® E 37 are in the polish and release agent sectors.

T-Mulz® T9PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product also functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation. It finds application in agricultural tank mix additives as fertilizer-water conditioner formulations.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Det® A 1312 is a non-ionic surfactant that is produced through the reaction of iso-tridecyl alcohol with 12 moles of ethylene oxide. This product can be used in a variety of applications, including textiles, metal degreasing, and household cleaners, due to its ability to penetrate, wet, solubilize, disperse, and emulsify effectively.

T-Det® A 91-8 is an anhydrous liquid surface-active agent produced by the reaction of an alcohol with 8 moles of ethylene oxide. This product is useful in many applications, such as textile processing, metal degreasing, clay soils, fire fighting, and industrial, institutional, and household cleaners. It is considered a great detergent due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify.

T-Det® 0519 is a specialized blend of alcohol ethoxylates with exceptional degreasing properties. It can be used to reduce the amount of oxygenated solvents and reduce VOC levels. This product is useful in many applications, such as textile processing, metal degreasing, transportation cleaners, vehicle care, and industrial, institutional, and household cleaners. It is considered a great detergent due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify.

T-Det® A 267-9 is a biodegradable, 7-mole ethoxylate of a linear C12-C16 alcohol with 90% active content. It has exceptional detergent properties and can be used in various cleaning formulations. This product appears as a clear liquid at room temperature.

H-Sil® STS is a low-molecular-weight, nonionic silicone surfactant that imparts low surface tension to formulated household and agricultural products. It improves the wetting and detergency of neutral household cleaning detergents and degreasers on hard surfaces. This product will improve the wetting, spreading, and penetration of agricultural chemicals and is an additive for use in pesticide products or as a tank-mix adjuvant. It can achieve surface tensions of 22 m/M with rates as low as 0.01% in aqueous-based agriculture and coating formulas, thus improving spreading across a variety of surfaces. This product is exempt from tolerance under 40 CFR 180.1001(c) for agricultural uses.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

T-Det® A 139 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 9 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

H Soft® AO-1416 is a 30% active myristyl/cetyl (C14/16) dimethylamine oxide in water that can build viscosity and increase foaming capabilities. It is stable in acid, base, and hypochlorite, and is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality makes it suitable for a wide range of applications and markets.

T-Det® A 26-4.5NR is a 4.5 mole ethoxylate of a linear C12-C16 alcohol with excellent detergent properties that can be used in a wide variety of cleaning formulations. This biodegradable product can be derived from either natural or synthetic sources.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

T-Mulz® 810 is an alcohol-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions to improve salt tolerance. This product is also used as a hydrotrope that provides detergency, wetting, and coupling. It is compatible with both anionic and nonionic surfactants.

T-Det® A 1315 is a surface active agent used in various applications such as textile processing, metal degreasing, clay soils, fire fighting, industrial, institutional, and household cleaners. It is known for its ability to penetrate, wet, solubilize, disperse, and emulsify. This agent is produced by the reaction of iso-tridecyl alcohol with 15 moles of ethylene oxide.

T-Mulz® 734-2 KS is the potassium salt of an organic phosphate ester that is designed for use in alkaline cleaners and concentrated electrolyte solutions. It improves salt tolerance and functions as a hydrotrope. This product serves as a coupling agent in conjunction with other surfactants to clarify formulations that might otherwise be inhomogeneous. It also has the ability to improve a formula€™s wetting ability and detergency.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

T-Det® N 30 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 30 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A2623 is an anhydrous surface-active agent produced by the reaction of a linear C12-16 alcohol with 23 moles of ethylene oxide. It is a solid at room temperature. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A 133 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 3 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A 91-6 is an anhydrous liquid surface-active agent produced by the reaction of an alcohol with 6 moles of ethylene oxide. It is an excellent detergent for textile processing, metal degreasing, clay soils, fire fighting, and industrial, institutional, and household cleaners due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify, making it a great detergent.