Products in Medical: Food Contact Acceptable

Hexamoll® DINCH functions as a non-phthalate plasticizer ideal for PVC and other polar polymers, especially in applications involving close human contact. Its clear, colorless, and almost odorless liquid composition makes it practically anhydrous. This plasticizer exhibits compatibility with common organic solvents, as well as other monomeric plasticizers used in PVC, while being nearly insoluble in water.

SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6600/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/70 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/70 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/80 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003/80 US A/B series. It is a paste-like, easily pigmentable two-component compound noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. It is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6700/40 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Its vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6600/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6610/40 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® LR 5040/45 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/45 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

SILPURAN® 6400/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.

Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.

Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!

Duratron® LSG PEI is a product available in the form of plates and rods and offers a range of valuable features such as good electrical properties, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, X-ray sterilizability, life science grade, gamma sterilizability, good mechanical properties, food contact acceptability, steam sterilizability, high performance, heat sterilizability, plasma gas sterilizability, excellent thermal properties, and chemical resistance. It comes in a variety of colors including black, translucent, blue, and amber. This versatile material is suitable for a wide range of applications, including implants and prosthetics, medical devices and assemblies, and food and beverage packaging.