Products in Adhesives & Sealants: Low Outgassing

CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

SETWORX™ 60 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties.

TG-45LV is a specially formulated with low viscosity/screen printable consistency to achieve low BLT and high thermal conductivity for optimum thermal performance. Exhibits excellent resistance to pump out, outgassing and phase separation while eliminating concern of silicone deposition on optics and electronics within any package. TG-45LV is high performance thermal grease designed to meet the thermal, reliability and low-price requirements of high-end chipset, graphic processors trend ever-faster clock speeds. RoHS compliant and halogen -free

TP7205 is an alumina filled, low bond strength thermoplastic film adhesive. It is designed for bonding heat-sink, component, and substrate. TP7205 has good thermal conductivity and is tacky at room temperature. The adhesive film typically can be used for most applications at temperature from -65 to 150°C. Customers must test the adhesive for their specific application to confirm its suitability.

SetWORX™ 1510 is a fast setting, toughened epoxy adhesive designed for industrial grade applications. This epoxy system has 1:1 mixing ratio by volume & cure fast at room temperature. When cured it is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. The cured adhesive exhibits high impact resistance and exceptional bond strength. It can be used for bonding glass, metals, woods and some plastics.

RTK7659 is a tack-film, reworkable, diamond-filled, epoxy film adhesive designed for bonding die, component and substrate to a mismatched substrate or carrier. This B-Staged, dielectric adhesive offers excellent reworkability at 80-150°C. RTK7659 has excellent thermal conductivity and the low Tg of the adhesiveimposes minimum thermal stress on bonded parts during thermal cycling or shock testing.

TC8750 is a silver-filled, B-staged epoxy film adhesive. It is designed for bonding component and substrate to a mismatched substrate or carrier. Its low Tg imposes minimum thermal stress on bonded parts during thermal cycling or shock testing. It has excellent thermal conductivity and can be used for most applications at temperatures from -65 to 150°C. It is reworkable at 80-150°C. Customers must test the adhesive for their specific applications to confirm its suitability. TC8750 is designed to meet the hybrid adhesive specification MIL-STD-883; Method 5011. It exhibits low outgassing at 125°C and passes NASA Outgassing requirements.

TP7209 is a low bond strength thermoplastic film adhesive. It is designed for bonding heat-sink, component, and substrate. This unique diamond flled material has excellent thermal conductivity and is tacky at room temperature.

NuSil™ CV10-2500 is a controlled volatility silicone. For applications requiring low outgassing and minimal volatile condensable under extreme operating conditions.

NuSil™ CV-2567 is a controlled volatility RTV silicone.

LightSpan® LS-3351 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Use with Phosphor, Index matches to Crown Glass such as BK7 Index matches to plastics such as COC.

NuSil™ CV-2500-2 is a controlled volatility black silicone elastomer.

NuSil™ CV9-1142 is a controlled volatility (CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: High Durometer, Low Density.

ThreeBond Europe SAS TB1533 is a multi-purpose, high strength elastic adhesive based on an MS polymer which reacts rapidly upon exposure to moisture in the air and cures to form a toughened elastomer with time. Containing no solvents, plastisizers, or isocyanates, the adhesive has excellent non-staining characteristics against substrates and is over-paintable. It provides excellent weather resistance, high adhesion strength to most substrates without the need for pre-treatment, and is user friendly due to its low odor. In addition to bonding TB1533 can be used for sealing and potting electrical components as no low-molecular siloxanes are produced during curing.

NuSil™ CV-2942 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W/m-K, Primed Lap Shear 375 psi (2.6 MPa).

NuSil™ CV14-2500 is a controlled volatility silicone.

NuSil™ CV-2289-2 is a controlled volatility potting and encapsulating silicone elastomer.

NuSil™ CV-1142 is a non-corrosive controlled volatility RTV silicone adhesive/sealant.

ThreeBond Europe SAS TB3380B has been developed for bonding electrical and electronic parts, which require low outgas. A 2-component epoxy type electroconductive adhesive, it may be cured at room temperature, although curing at an elevated temperature reduces the amount of outgas further.

Ultra Low Outgassing SCV2-2590 is a ultra low outgassing clear silicone.

NuSil™ CV4-1161-5 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.005 inches (127 microns) Double Side Tape, Kapton® Center, 2.0 ppi.

ThreeBond Europe SAS TB3001C is a one component solventless adhesive which can be cured by UV and visible light between 200 and 440 nm. TB3001C is particularly fitted to the adhesion and sealing of electrical and electronic components and provide as well an excellent mechanical and chemical resistance.

NuSil™ CV3-2500 is a controlled volatility RTV silicone.

NuSil™ CV1-8151 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Penetration 0.4 mm.

NuSil™ CV-2566 is a controlled volatility RTV silicone adhesive.

LightSpan® LS-3246 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Index matches to glass such as fused silicates (Glass, Quartz).

NuSil™ CV-2189-2 is a controlled volatility silicone glop-top.

NuSil™ CV-9052 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy General Purpose: Dampening Fluids, Lubricants & GreasesComments: Volume Resistivity 1x10^15 ohm-cm, Thermally conductive.

NuSil™ CV-2502 is a thixotropic controlled volatility RTV silicone.

NuSil™ CV7-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

LightSpan® LS-3443 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Soft and Tacky Gel, Penetration 5 mm.