Products in Other Electrical & Electronics Applications: Good Proces...

PPS-SG503E65 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

NYPOL® A3 G33 PRTA011 NR305 is a 6.6 black polyamide with 33% fiberglass

PA66 conduct electricity DD2 enhances its conductivity, heat resistance and easy to process. Conductive PA66 is used for electronic and electrical products.

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

TPU T170 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

INOFLON® GN7003 has high dielectric strength with good dimensional stability.

NYPOL® A3 G10 N10 NTLA014 NR514 is a 6.6 polyamide with 10% extra lubricated fiberglass

Videolar 500 is a general purpose polystyrene.

NYPOL® A3 G15 NTLA010 NR324 is a Natural 6.6 polyamide with 15% glass fiber

NYPOL® A3 G25 HS UV RH PRTA011 NR306 is a 6.6 black polyamide with 25% thermostable fiberglass with UV protection

TPU T3165 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

PPS-SG403E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

NYPOL® A3 G15 HS UV RH PRTA011 NR303 is a 6.6 black polyamide with 15% thermostable fiberglass with UV protection

NYPOL® A3 G50 HS UV RH PRTA011 NR416 is a Black polyamide 66 with 50% thermostable glass fibers with UV and hydrolysis resistance

NYPOL® A3 G30 NTLA010 NR399 is a Natural polyamide 66 with 30% glass fibers

NGC250I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell, Italy. It is a general purpose grade which can be used in many different injection molding applications.

PPS-SG405E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

NYPOL® A3 G30 HS RH UV PRTA011 NR393K is a 6.6 black polyamide with 30% thermostable fiberglass with UV protection

TPU T3185 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

NYPOL® A3 G50 NTLA010 NR308 is a Natural 6.6 polyamide with 50% glass fibers

NYPOL® A3 G20 V10 NTLA010 NR304 is a Natural 6.6 polyamide with 30% mixed load

CarbonX® X-3 is delivered in pelletized powder form in 20kg PP bags. For bulk orders, CarbonX® can be delivered in 1000 kg FIBCs and also available in masterbatch form for thermoplastics and elastomers. Masterbatches have been optimally mixed to ensure the highest quality possible in the final product while cutting down on lead times for R&D and Production.

PPS-SG505E45 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

G-10V is a grade of Reinforced flame retardant PBT which offers good creep resistance, good impact, good dielectric strength, good fatigue resistance, heat resistance, good dimensional stability, good flow and processibility, good flammability. Reinforced flame retardant PBT is used for electric coil skeleton, electric plug-in unit, luminaire parts, integrated circuit parts, automobile engine shells, automobile by-pass valve control, etc.

TPU T3375 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

NIRETAN B EXL is delivered in Natural color form.

Qpac® 25 Poly(Ethylene Carbonate) is an amorphous, clear, readily processable solid polymer with long-term mechanical stability. The chemical formula is (C3H4O3)n.

NYPOL® B3 G30 NTLA010 NT301 is a Natural polyamide 6 with 30% fiberglass

INOFLON® GN7001 has high dielectric strength with good dimensional stability.

PA6 is also known as Nylon 6 or polycaprolactam. It is a semicrystalline polyamide with 20% glass fiber.

TPU T3190X is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.

CarbonX® X-1 is delivered in pelletized powder form in 20kg PP bags. For bulk orders, CarbonX® can be delivered in 1000 kg FIBCs and also available in masterbatch form for thermoplastics and elastomers. Masterbatches have been optimally mixed to ensure the highest quality possible in the final product while cutting down on lead times for R&D and Production.

FR‐31L is an additive flame retardant used in PVC, flexible polyurethane foams, plastics. whose superiority is demonstrated in very low scorch, low volatility, excellent hydrolytic stability, low fogging and processing characteristics.

NYPOL® A3 G20 V10 PRTA010 NR302 MSP is a 6.6 black polyamide with 30% mixed load