Products in Other Electrical & Electronics Applications: Electrical/...

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 W M30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W M30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Fudow Company F5760F is a glass fiber.

Polycarbonat +30% fiber glassr abbreviated as PC+GF30 used in Automotive, Terminal Blocks, Plugs & Sockets applications.

Nilit NILAMID® C3 HH GF60 is a Polyamide 66/6 (Nylon 66/6) compound, 60% glass fiber reinforced, high heat stabilized.This compound is intended for injection molding.NILAMID® C3 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 N is an unfilled nucleated easy flow Polyamide 6 (Nylon 6) compound.This compound is intended for injection molding.NILAMID® B3 N is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

POLYKING® Polyamide engineer plastic is not only super high strength and high rigidity, but also has very excellent heat stability and chemical resistance. It shows very excellent stability on different kinds of oil compounds and has excellent electrical property. It is widely used in electrical and electronic, automotive, communication, mechanical engineer, sport apparatus etc..

EP GC 201 is a glass cloth epoxy (epoxide) resin.

Nylacast Peek is a high performance engineering thermoplastic. It is very strong and rigid. The characteristics of PEEK show that it has the highest tensile strength in the plastics family. It can be used on a continuous basis in temperatures of 480°F (250°C) without any loss of its properties.

EP GC 204 HF is a woven glass cloth epoxy (epoxide) resin.

Karntner Montanindustrie Micro L is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Nizhnekamskneftekhim High-Impact Polystyrene 740 is a general purpose molding grade with high melt flow rate, intended for manufacture of parts for small and big household and electronic appliances.

Nilit NILAMID® B3 HH GB50 is a Polyamide 6 (Nylon 6) compound, 50% glass bead reinforced, high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

avanION 11 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

CLH6010 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

Non-O-Sil ASD Nan-O-Sil ASD is a unique colloidal silica processing aid from Energy Strategy Associates, Inc. slashes molding cycle times. Ultra-fine bright white silica particles have been shown in laboratory and commercial field trials to reduce injection molding cycle times by 20% to 30% in polypropylene, filled and unfilled nylon, PBT, Acetal, glass filled PC, PPS, PEEK, and Rigid PVC (read more: PVC Results Summary | Nanosil ASD Study). This processing advantage is accompanied by retention and improvements in key physical properties at low loadings (0.8% wt.).

Global ABS-305 General Purpose ABS is Poly(Acrylonitrile Butadiene Styrene) thermoplastic

Karntner Montanindustrie HAR 50 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Karntner Montanindustrie Submicro 4-15 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

PC-COM PC3032 is a flame retardant PC grade with a UL94 rating tested to V0 at 3.0 mm. Applications include transparent, opaque and tinted electrical enclosures, safety equipment and IR windows.

Fudow Company F5910F is a organic filler.

PC-COM PC415 is a medium flow general purpose polycarbonate grade with external GWT approval. Applications include electrical enclosures and lighting.

HENAN SHENMA HUAWEI PLASTIC PC-20 is used in Mobile phone shells, electrical appliances shells, car accessories lampshades, handles.

CLR3517 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.

Fudow Company F5773F is a glass fiber.

CLH5515 is a two component, unfilled, heat cure epoxy system. It was specifically developed for impregnating coils. The cured material exhibits excellent thermal stability and thermal cycling characteristics.

Nilit NILAMID® A3 GB30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GB30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 GB50 is a Polyamide 66 (Nylon 66) compound, 50% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

HENAN SHENMA HUAWEI PLASTIC PC-10 is used in Mobile phone shells, electrical appliances shells, car accessories lampshades, handles.

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 GB15 is a Polyamide 6 (Nylon 6) compound, 15% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GB15 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

CLH6020 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.

XHD1019 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.

HENAN SHENMA HUAWEI PLASTIC PC-30 is used in Mobile phone shells, electrical appliances shells, car accessories lampshades, handles.

SERACRIL ABS is a technological polymer for injection molding with surface gloss, dimensional stability, good shock resistance and average thermal resistance. These characteristics allow employing SERACRIL in a wide range of sectors, such as the automotive, textile, electric, electronic and telephone industries, and for the production of household appliances, office equipment, office furniture and of different technical articles. SERACRIL can be supplied in natural color or in shade as well as costumers' color requirements, and with fiber-glass, glass-ball or self-extinguishing reinforcement.

Nilit NILAMID® A3 HHR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® A3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.