Products in Other Electrical & Electronics Applications: Electrical ...

OMNISTAB® AN 168 is a hydrolytically stable phosphite processing stabilizer. Also acts as an antioxidant.

RoHS compliant flame retardant V0 PP copolymer compound, mineral loaded. For SDS, please contact Addiplast Group using the 'Request Document' button.

OMNISTAB® LS 770 is a low molecular weight hindered amine light stabilizer (HALS) for applications demanding particularly high light stability.

RoHS compliant flame retardant V0 PP homopolymer compound, mineral loaded. For SDS, please contact Addiplast Group using the 'Request Document' button.

RoHS compliant flame retardant V0 PP copolymer compound, mineral loaded, impact modified. For SDS, please contact Addiplast Group using the 'Request Document' button.

CLR1329 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.

CLR1876 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.

A212 is a Ground ATH is used in SMC, BMC.

CLR1821 is a filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product is certified with ul and passes ul94-v1 flammability testing.

A210 is a Ground ATH is used in SMC, BMC.

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

CLR1157 is a heat cure, low stress, extremely tough, epoxy casting compound. The product was specifically designed for casting electrical motors. the cured material exhibits excellent thermal stability and thermal cycling characteristics.

Akron Polymer Systems APS-PEM-B is a polymer blend that can be used to prepare high temperature PEMs that can be used in phosphoric acid based fuel cells.

CLH6441 is a filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product is certified with ul and passes ul94-v1 flammability testing.

CLR1946 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

A204 is a Fine Ground ATH is used in Vinyl, SMC, PVC, Pultrusion.

Ketoprix™ EKT33G2L and EKT33G3L resins are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

CLH5100 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.

A206 is a Ground ATH is used in Pultrusion, BMC.

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 505A is an amorphous rubber with low molecular weight and high ENB content, 505A is able to be applied for various types of product by taking advantage of its good flow and high cure rate, By blending with diene type rubbers such as a natural rubber, 505A plays significant roles to improve their ozone resistance, 505A is also suitable for foam applications made by continuous curing and it produces various sponge products with low density.

XPD1278 is a low viscosity, two component, polyurethane casting resin specifically designed for casting transformers, coils and electronic components. The cured product has excellent thermal shock resistance.

CLP7469 is a solventless, low viscosity, two component, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. This product is especially suitable for encapsulating low and middle voltage power and instrument transformers where cushioning of the core is not practical. The cured product has excellent thermal shock resistance.

CLI4161 is a solventless, low viscosity, two component, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. This product is especially suitable for encapsulating low and middle voltage power and instrument transformers where cushioning of the core is not practical. The cured product has excellent thermal shock resistance.

A208 is a Ground ATH is used in BMC, Carpet Backing, Rubber.

XRD1018 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.

CLH6230 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.

XR61406 is a low density epoxy casting system. product is recommended for reducing weight, when casting and potting small electronic modules. Product is suitable for operating in environments from -40c. to +120c.

AH430 is a Ground ATH is used in BMC, FRP, Pultrusion.

AH290 is a Ground ATH is used in Yarn, Mills, SMC.

CLR1837 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

CLH5185 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

CLH6500 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

CLH6010 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

CLR3517 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.

HENAN SHENMA HUAWEI PLASTIC PC-10 is used in Mobile phone shells, electrical appliances shells, car accessories lampshades, handles.