Products in Electrical & Electronics: Automotive Applications

SABIC's Specialties Business High viscosity Proprietary Polycarbonate Ester, OSU 55/55 compliant, low smoke, flame retardant resin This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LEXAN ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3.0mm flame retardancy based on non-chlorine, non-bromine FR systems. LEXAN ML6411 resin offers excellent processing characteristics with opportunity for shorter IM cycle times compared to standard PC. This product is available in a wide range of opaque colors and is an excellent candidate for a wide range of electrical applications.

SABIC's Specialties Business LNP LUBRICOMP UCL36S compound is based on Polyphthalamide (PPA) resin containing 15% PTFE, 30% carbon fiber. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized, Electrically Conductive.

SABIC's Specialties Business ELCRES FXE9111T PC Siloxane copolymer resin is an injection molding grade. Non-chlorinated, non-brominated flame retardant. This resin offers good low temperature (-10 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. Available for VisualFx capability in opaque “Illuminate” colors. ELCRES FXE9111T resin may be an excellent candidate for a broad range of applications, including but not limited to Automobile, Appliance, Electronics, etc.

LNP LUBRICOMP CL002 compound is based on Polystyrene (PS) resin containing 10% PTFE. Added features of this grade include: Wear Resistant.

LNP COLORCOMP D1000RU compound is based on Polycarbonate (PC) resin. Added features of this grade include: Mold Release, UV Stabilized.

SABIC's Specialties Business Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business XHT4141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business XHT2141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business Improved flow PC with excellent processability and mold release. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H55ZP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZP, its standard, non-recycled counterpart. Aegis® PIR-H55ZP is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications as well as carpet fiber.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H55ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZI, its standard, non-recycled counterpart. Aegis® PIR-H55ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monfilament and multifilament applications as well as carpet fiber.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H55ZP is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications as well as carpet fiber.

ForTii® Ace MX52 is a polyphthalamide (PPA) with unique fatigue performance and chemical resistance. Its high aromatic content and high Tg lead to excellent part stiffness and low creep, even at temperatures up to 150 °C. Moisture uptake occurs slowly, with minimal impact on dimensions. ForTii® Ace MX52 is processed using injection molding technology and is heat stabilized. It is 40% glass-reinforced and suitable for automotive applications.

ForTii® Ace MX53 is a polyphthalamide (PPA) with unique fatigue performance and chemical resistance. Its high aromatic content and high Tg lead to excellent part stiffness and low creep, even at temperatures up to 150 °C. Moisture uptake occurs slowly, with minimal impact on dimensions. ForTii® Ace MX53 is processed using injection molding technology and is heat stabilized. It is 50% glass-reinforced and suitable for automotive applications.

SABIC's Specialties Business Transparent/translucent PC for light diffusion special effects. Color package may affect performance. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP COLORCOMP I1000 compound is based on unfilled Nylon 6/12 resin. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP COLORCOMP NX05467 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend. Added features of this grade is: Non-Chlorinated, Non-Brominated Flame Retardant with UL V0, 5VB and 5VA flame rating.

SABIC's Specialties Business LNP LUBRICOMP QFL17RS compound is based on Nylon 6/10 resin containing 35% glass fiber, 5% PTFE. Added features of this grade include: Easy Release, Heat Stabilized, Wear Resistant.

SABIC's Specialties Business NORYL™ PPX640 resin is a 40% glass fiber reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high stiffness along with temperature performance, impact resistance, hydrolytic stability, and dimensional stability. NORYL™ PPX640 resin is an excellent candidate for applications requiring a good chemical resistance and high stiffness.

SABIC's Specialties Business LNP LUBRICOMP UFL36SXC compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized.

SABIC's Specialties Business LNP COLORCOMP R1000S compound is based on Nylon 6/6 resin. Added features of this grade include: Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP LUBRICOMP UL002S compound is based on Polyphthalamide (PPA) resin containing 10% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

SABIC's Specialties Business 40 MFR LEXAN™ High Flow Ductile Copolymer This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP COLORCOMP D1000P compound is based on unfilled Polycarbonate (PC) resin. Added features of this grade include: Exceptional Processing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

MOCOM Compounds ALTECH® PC-HT A 1000/500 is a high heat polycarbonate with special features that make it suitable for automotive and lighting applications. It should be stored in a dry and protected environment at a temperature not exceeding 30°C. The recommended processing injection molding temperatures are a melt temperature of 320-340°C and a mold temperature of 100-130°C. Typical applications include housings and light switches.

MOCOM Compounds ALCOM® CFX ABS+PC 1000 UV 19004 is a modified Acrylonitrile/Butadiene/Styrene/Copolymer with polycarbonate and UV stabilized filler/additive system designed to give a special metallic effect and good flow. It is suitable for injection molding applications in the automotive, building and construction industries, and is used for housing and clothing/fastener applications.

MOCOM Compounds ALFATER® XL A30I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color and bright inherent color. It is widely used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets for injection molded parts such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, and 2K components. Furthermore, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general.