Products in Electrical & Electronics: Reinforcement

Carbon UDs 38486 (Width 300) is made of UD fabric by plain weaving style.

Conductive Composites Nickel Coated Fibers - Precision Chopped (PCF) has developed a proprietary Chemical Vapor Deposition (CVD) coating process where fibers are coated with a very thin, robust, and ductile film of pure nickel. Our process produces a conductive fiber with superior handling properties and excellent conductivity/shielding capabilities. Through a Precision Converting Process, these fibers are converted into short, precise, millimeter and sub-millimeter coated fiber lengths. This provides our customers and partners with a high-performance structural and conductive additive that is both lighter and longer than typical nickel coated graphite powder. Due to their precise lengths and easy dispersion, precision chopped fibers are very effective and economical as a conductive additive for paints, gaskets, sealants, molding compounds, and adhesives.

D2-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

D3-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Owens Corning SE4849 single-end Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with Polyolefins: PP, PE and HDPE resin systems.

Procotex CF-0.7mm is a mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

D2-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

468A roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and other insulations.

Sigrafil® C C6-4.0/240-E100 chopped carbon fibers are created through precision cutting of our continuous carbon fiber tows and are available with various sizings and in various cut lengths. They are especially popular as a reinforcing material or filler. As a functional additive, our short carbon fibers are primarily used in the manufacture of compounds for thermoplastic injection molding processes in the high- and low-temperature ranges. In addition, they are ideally suited for turning non-conductive materials such as plastics, resin systems and special papers into conductive ones. chopped carbon fibers are created through precision cutting of our continuous carbon fiber tows and are available with various sizings and in various cut lengths. They are especially popular as a reinforcing material or filler. As a functional additive, our short carbon fibers are primarily used in the manufacture of compounds for thermoplastic injection molding processes in the high- and low-temperature ranges. In addition, they are ideally suited for turning non-conductive materials such as plastics, resin systems and special papers into conductive ones.

E Glass fabrics 1610 is a balanced plain weave fabric.

3B Fiberglass M8615 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

3B Fiberglass CM6060 is a non-wo-ven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 6060 & CM 6065 family products contain an insoluble binder compatible with a large range of thermoset matrices like both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) Both CM 60606 and CM 6065 mats are characterized by their white color and are ideally suited for pultrusion pro-cesses for wide, long and heavy parts but as well for narrow and complex pro_x005F_x001f_les. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins make the pultruded parts attractive for the electrical apparatus (high voltage), transportation industries and infrastruc-tures equipments.

440 Assembled Panel Roving for SMC are compatible with UP and VE. They deliver properties of good choppability and dispersion, low fuzz, good we-out and good antistatic performance.

Conductive Composites NiCVD Coated Fibers 1BC1-12 is Carbon fibers are widely used in commercial and defense applications because of their strength and weight properties. Conductive Composites has developed proprietary coating processes that coats individual filaments with thin, uniform coatings of pure metal.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

Carbon Fabrics 38194 (Width 1250) is made of carbon fiber by 2/2 Twill weaving style.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

Hesgon Company 100% Polyester Heat Shrink Tape 56-36P is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

Hi-Nicalon™ Type S SiC Fiber is a multifilament silicon carbide-type fiber manufactured by NGS Advanced Fibers Co., Ltd. (NGS) of Japan. NGS is known worldwide as the leading manufacturer and innovator of multi-filament silicon carbide-type fibers. HI-NICALON™ TYPE S is a stoichiometric beta-SiCfiber manufactured near-oxygen-free using decarbonization pyrolysis and electron-beam curing. It has higher modulus, creep resistance and oxidationresistance than Hi-NICALON™.HI-NICALON™ TYPE S is highly resistant to oxidation and chemical attack and is available in a variety of product forms, depending on the intended use.

G10001010T of G10001xxxT Series of Glass Nonwovens is Wet-laid nonwovens consisting of 11-um diameter E-glassfiber staple (1/2") with 1-20 wt.% of polyvinyl alcohol binder. Widths can be specified.

Natex 2D 400 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Plain 1/1 Natex® Fabrics with Laize 1000 mm and as 400 g/m2.

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

D1-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

G-TEX M 1200 is Nonwoven fabric made from recycled carbon fiber. 1200 denotes the fabric width in mm.

Nattex 2L is a semi-finished product in natural fiber in the form of continuous technical flax fibers. It comes as roving direct in natural fibers with pure flax of 2g/m.

Hesgon Company Polyester-Glass Heat Shrink Tape 56-36PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

Carbon UDs DW0164 is made of UD fabric by plain weaving style.

3B Fiberglass 163D-14C chopped strand is specifically designed for excellent performances in injection and transfer molding processes & applications.The sizing coated at the glass fiber surface is engineered for enhanced compatibility with phenolic and epoxy resin systems.Thanks to its very light color, this product can be used in any natural grade compounds without impacting the color of the final part.Specific manufacturing technology provides 163D-14C chopped strand product with excellent dispersion and impregnation. As a result, this product offers excellent properties in a wide range of applications.

D1-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

PA high flow, high content of glass fiber reinforced mechanical properties. Applied in automobile, electric products and machine. PDA approval. (The product is only for global high-end customers)

Procotex CF-120mm is a mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

G-TEX TM PP/60 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. PP/60 Denotes type and weight% of thermoplastic; it signifies inclusion of PP fiber at 60wt%.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

Blu Dot Asia BDA-3K-T38 is a PAN based carbon fiber, which is stronger than steel, lighter than aluminum by weight and has a higher stiffness than titanium alloy.

Procotex CF-0.5mm : mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.