Products in Electrical & Electronics: Laminate

INBORD® E is a phenol / melamine laminate with a creepage-resistant, decorative surface and good mechanical and dielectric properties as well as sufficient arc resistance. The core is similar to PF CP 203 according to IEC 60893 or Hp 2061.6 according to DIN 7735. The thickness of the melamine layer is approx. 0.25 mm. The insulation class is E (120 ° C).

Beijing New Friend Insulation Material F828 Phenolic Paper Laminate is from the bleached wood pulp paper impregnated with phenolic resin, drying, hot pressing made. Implementation is in enterprise standard.

Acculam™ Siliglas G7 comprised of a high performance silicone resin and a woven fiberglass substrate. It qualifies to NEMA G-7 and MIL-I-24768/17.This material has high heat resistance, low dissipation factor, and excellent arc resistance. It is flame resistant with low smoke evolution, and meets the needs of Class "H" insulation. It is used in high frequency telecom equipment, transformers and items subjected to high heat.

Lamitex® G-11/G-10 EP GC 22 laminated sheet is a woven glass fabric composite impregnated with an epoxy resin. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. It is frequently specified for its excellent resistance to chemicals and retention of good electrical properties in dry and high humidity environments. G-11 is non-brominated, is not flame retardant and should not be confused with a similar glass epoxy grade FR-5 which is flame retardant.

IS415 is engineered to meet the demands of Lead (Pb) free multilayer printed circuit assembly, deliver CAF resistance with strong IST results and maintain FR-4 processing. IS415 offers good electrical performance, superior chemical and thermal performance and product consistency.

DiClad laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. Using precise control of the fiberglass/PTFE ratio, DiClad laminates offer a range of choices from the lowest dielectric constant and dissipation factor to a more highly reinforced laminate with better dimensional stability

G200 has Blending Bismaleimide/Triazine (BT) and epoxy resin which provides G200 with enhanced thermal, mechanical and electrical performance over most epoxy materials. G200 possesses performance characteristics that make it an excellent selection for large panel size, high layer count Printed Wiring Boards (PWB).

Resiten® LEM400 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

VOLTIS® Hgw RO 42 (PF CC 42) is a Round molded phenolic cotton fabric laminate rod with high toughness for mechanical applications.

35NQ is a pure polyimide laminate and prepreg system. Reinforced with woven Quartz fabric, combining the advantages of a reduced cure cycle, high temperature polyimide system (Tg >/=250°C), with low dielectric constant and loss tangent (DK = 3.5, loss 0.009 at 1 MHz) for applications requiring operation at RF/Microwave frequencies. Polyimide Quartz materials also exhibit reduced in-plane CTE for expansion matched SMT applications.

RO4835T™ laminates are 3.3 Dk low loss, spread glass reinforced, ceramic thermoset materials that were designed as inner-layers for use in multilayer board designs, and to complement RO4835™ laminates when thinner cores are needed.

The FloLam® PR+ is the ultimate enhancement for thermoplastic composites for both surface protection and esthetics. It is specially engineered to produce a close to Class “A” finish – no surface voids.

RT/duroid® 6035HTC high frequency circuit materials are ceramic filled PTFE composites for use in high power RF and microwave applications.

Vetronite® EGS 619 is composed of epoxy matrix and glass fabric reinforcement. it appears in Light green color with EP GC 202 FR-4 Standards.

Resiten® GLEM is a fine weave cotton fabric/melamine laminate with a glass epoxy interleave.