Products in Electrical & Electronics: Polypropylenes (PP)

MOCOM Compounds ALTECH® PP-B B 4020/506 MR20 is a polypropylene copolymer with 20% mineral filler/additive system featuring easy release (demolding), processing stabilized, heat stabilized, and easy flow properties. It is suitable for the packaging, building and construction market segments, and typical applications include housings, functional components, and fixing elements. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C.

MOCOM Compounds ALCOM® MED PP 2040 BL1182-19 is a polypropylene homopolymer with a 40% glass fiber filler/additive system specifically designed for use in the Medical/Personal Care market segment. It is typically used for housings. To ensure optimal performance, it is recommended that pre-drying be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done with a melt temperature of 200-270°C and mold temperature of 20-90°C. It is important to protect the material from light and not expose it to temperatures above 30°C, as this may cause material degradation.

MOCOM Compounds ALTECH® PP-B A 1000/120 UV is a polypropylene heterophasic copolymer with UV stabilized, heat stabilized, and processing stabilized properties. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C and is commonly used for automotive exterior parts and functional components, such as housings. Pre-drying is recommended in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h.

MOCOM Compounds ALTECH® PP-H A 2025/252 GF25 CP UV is a polypropylene homopolymer with 25% glass fibers and is UV stabilized, chemically coupled, heat stabilized, easy to release (demolding) and processing stabilized. It is used in machinery, automotive, interior decoration/finishing injection molded parts and functional components, housings.

MOCOM Compounds ALTECH® PP-B A 4920/100 MR20 is a Polypropylene Heterophasic Copolymer with a 20% talcum filler/additive system that is heat stabilized, easy to release (demolding) and processing stabilized. It is suitable for Automotive, building and construction, electrical, and electronic applications, including interior decoration/finishing, gardening tools, exterior parts, and electrical components. Typical applications include housings, functional components, and fixing elements. Pre-drying conditions should be in an air-circulating dryer 80-120°C for 2-4 hours or in a dry air (desiccant) dryer 80-120°C for 2-3 hours. For best results, processing injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H B 4030/507 TV30 is a Polypropylene Homopolymer with a mineral filler/additive system that is UV stabilized, has easy release (demolding), processing stabilized, and heat stabilized properties. It is suitable for use in the Automotive market segment and is ideal for applications such as fixtures/fittings, exterior injection molded parts, and interior decoration/finishing. Typical applications include functional components, fixing elements, clothing/fasteners, and housings.

MOCOM Compounds ALTECH® PP-H A 4920/107 MR20 is a polypropylene homopolymer that is processing stabilized, easy to release (demolding), heat stabilized, and is typically used for functional components, housings, injection molded parts, interior decoration/finishing, clothing/fasteners in the automotive, electrical, and electronic market segments.

MOCOM Compounds ALTECH® PP-H A 2030/157 GF30 CP is a polypropylene homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This polypropylene contains 30% glass fibers that have been chemically coupled and heat stabilized, as well as added easy release (demolding) and slip agents. It is suitable for electrical and electronic, building and construction applications and is used in injection molded parts, electrical components, and domestic appliances such as housings, fans, and functional components.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.

MOCOM Compounds ALTECH® PP-H A 2030/158 GF30 CP is a Polypropylene Homopolymer filled with 30% glass fibers which is chemically coupled, heat stabilized, processing stabilized, and easy release (demolding). It is suitable for building and construction, as well as automotive applications, and is typically used for housings, functional components, and injection molded parts. Pre-drying conditions include a dry air (dessiccant) dryer of 80-120°C for 2-3 hours, or an air circulating dryer of 80-120°C for 2-4 hours. For processing injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C is required.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds ALTECH® PP-B A 1000/726.01 UV is a polypropylene heterophasic copolymer with a pre-drying condition in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or an air circulating dryer at 80-120°C for 2-4 h. It has a melt temperature of 200-240°C and a mold temperature of 20-70°C, and its filler/additive system consists of antioxidant, light stabilizer, lubricant, and is highly UV stabilized, with additional features such as slip agent, heat stabilized, and processing stabilized. It is suitable for market segments such as Automotive and Machinery, with typical applications in housings, handles, and functional components.

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds ALTECH® PP-H A 3030/100 is a polypropylene homopolymer with a 30% glass bead filler/additive system, specially designed for easy release (demolding) and slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C and can be used to create building and construction, sport and leisure applications, such as injection molded parts, interior and household goods, hygiene products, and housings. To ensure best results, pre-drying conditions should be in an air circulating dryer at 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h.

MOCOM Compounds ALTECH® PP-H A 2040/652 GF 40 UV CP is a Polypropylene Homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours. It is processed using Injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 40% glass fibers and is chemically coupled, UV stabilized, easy release (demolding), slip agent and heat stabilized. These features make it suitable for machinery, building and construction, and it is typically used for injection molded parts, clothing/fasteners and gardening tools.

MOCOM Compounds ALTECH® PP-H A 3030/100 GB30 is a Polypropylene Homopolymer with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is composed of 30% glass beads and a special filler/additive system that includes easy release (demolding), slip agent, and heat stabilization. It is commonly used in building and construction, sport and leisure, and is suitable for injection molded parts and interior applications such as household goods, hygiene products, and housings. To ensure optimal performance, it should be stored in a dry and light-protected environment at a maximum temperature of 30°C.

MOCOM Compounds ALTECH® PP-H A 2030/758 GF30 CP is a polypropylene homopolymer containing 30% glass fibers and chemically coupled, high heat stabilized, high stiffness, high toughness and laser transparent special features. It is suitable for a variety of applications, such as housings. For optimal performance, store it in a dry, light-protected environment.

MOCOM Compounds ALCOM® HM PP 1000 AG 17005 is a pre-dried polypropylene copolymer containing a hygienic filler/additive system. The material is white, similar to RAL 9003, and has antibacterial properties according to ISO 22196. It is suitable for use in packaging, personal care, household goods, furniture, building, and construction applications. Injection molding of the material should be done with a melt temperature of 200-270°C and a mold temperature of 20-70°C. The material should be stored and handled in a tightly sealed environment.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® PP 620/2 SV1246-04MCO is a pre-drying condition polypropylene homopolymer with a metallic effect and optimized flow line for easy flow. It is used for applications such as housings in the household goods industry and is processed through injection molding with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H A 2030/156 GF30 CP is a polypropylene homopolymer with 30% glass fibers and a filler/additive system that is chemically coupled, heat stabilized, easy release (demolding), and contains a slip agent. It is suitable for various market segments and typical applications such as housings and injection molded parts. For optimal processing, injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B B 4430/500 MR30 is a polypropylene copolymer suitable for injection molding. It includes a 30% mineral filler/additive system, providing easy release (demolding) and processing stability. This product is suitable for automotive, building and construction applications, such as housing and automotive trim unpainted, buffer, and functional components. For optimal performance, it should be stored in a dry and light-protected area at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 1000/310 IM is a polypropylene heterophasic copolymer that has been specially modified with elastomer, impact, processing, and heat stabilizers. This material is ideal for automotive applications such as exterior parts, interior decoration/finishing, and transport systems, and is commonly used for housings, functional components, and fixing elements.

MOCOM Compounds ALTECH® PP-H A 2030/156.01 GF30 CP is a Polypropylene Homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing a 30% glass fiber filler/additive system which is chemically coupled, heat stabilized, and contains a slip agent for easy release (demolding). This material is suitable for a variety of automotive and other market segments and can be used for applications such as housings and injection molded parts. To ensure optimal performance, it should be stored in a dry environment, away from light, and at a temperature not exceeding 30°C. It is also recommended to handle this material with care as it can be sensitive to pressure and heat.

MOCOM Compounds ALTECH® PP-H A 4818/100 MR18 is a Polypropylene Homopolymer with a Filler/Additive System of chalk, which features detergent solution stabilization, processing stabilization, and easy release (demolding). Processing Injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for building and construction applications and is often used in domestic appliances, housings, and functional components.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALTECH® PP-H B 4930/506 MR30 is a Polypropylene Homopolymer that is pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. It contains 30% talcum and is processing stabilized, heat stabilized, and easy to release (demolding) with a slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is suitable for use in the Automotive, Machinery and various other markets and is typically used in the production of dashboard/instrument panels, display elements, and various other fixtures/fittings, interiors, and various applications.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® PP-H A 4920/508 MR20 is a Polypropylene Homopolymer with a filler/additive system of talcum that has special features of being detectable, processing stabilized, easy release (demolding), and heat stabilized. It is mainly used in the building and construction and automotive market segments for applications such as injection molded parts, interior decoration/finishing, and functional components and housings. For optimal performance, this material should be stored in dark places and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 4940/506 MR40 is a polypropylene homopolymer suitable for processing injection molding. It contains a filler/additive system of 40% talcum which provides processing stabilization, easy release (demolding), slip agent, and heat stabilization. Typical applications include housings and functional components for the automotive, building and construction markets, such as pump components, filter systems, and fixtures/fittings. For optimal results, this product should be stored in a dry, light-protected environment not exceeding 30°C.