Products in Other Devices & Assemblies: Heat Resistance

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

ForTii® F11 is a breakthrough high-temperature polyamide that offers halogen-free and halogen-containing flame retardant grades, making it suitable for demanding applications in industries such as electronics, lighting, automotive, white goods, industrial, and aerospace. It provides an excellent balance of flow, toughness, and stiffness, enabling the production of thin walls or complex geometries in electronics and electrical applications. The material is VDE (Verband der Elektrotechnik) approved for all colors, has a high RTI electrical rating of 140 °C at 0.75 mm, and a CTI rating of 800 V, ensuring thermal and electrical performance. It is phosphorous-free and VDE-certified. The processing technology for this product is injection molding.

ForTii® F12 is a breakthrough high-temperature polyamide that offers halogen-free and halogen-containing flame retardant grades, making it suitable for demanding applications in industries such as electronics, lighting, automotive, white goods, industrial, and aerospace. It exhibits an excellent balance of stiffness and toughness, making it suitable for high-mechanical load applications such as power connectors or electric vehicle (EV) parts. With a high RTI electrical rating of 140 °C at 0.75 mm and JEDEC (Joint Electron Device Engineering Council) Level 2 performance, it allows for surface mount technology (SMT) processes without deformation and with a low risk of blistering. The processing technology for this product is injection molding, and it is phosphorous-free.

Improved heat resistance, low emissions, easy-flowing. Major Benefits: Low emission; Medium heat resistance; High flowability. Typical Applications: Radiator grille, Door components, Enclosures for electric devices.

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS. ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20. Benefits: Excellent balance of impact strength and flowability; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI)

Very high heat resistance ABS. ISO shortname: ISO 2580-1 ABS 2-M, MG, 115-08-09-20. Benefits: Increased flow; Super low emission grade; Very high vicat softening point ABS grade suitable for interior and exterior applications; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS plating grade. Benefits: Enhanced heat resistance; Better dimensional under heat; Excellent balance of heat resistance, impact strength and flowability. Typical Applications: Decorative interior parts, Profiles, Radiator grille, Tailgate handles. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

A translucent beige compound with semi-crystalline perfluoropolymer nano-filler, specially developed to meet the demands of the semiconductor and bio-analytical industries. Compatible with fluorine based chemistries and universally suitable for both wet and dry semiconductor processes including Lithography, Plasma, PVD, CVD, Etch, Stripping and Cleaning.Perlast® G74P combines a fully fluorinated polymer backbone, a fully fluorinated nano-filler system (no inorganic fillers) and a highly fluorinated cross-linking process, which results in a perfluoroelastomer with unrivaled purity, chemical resistance and mechanical properties.Perlast® G74P exhibits extremely low out-gassing properties, making it ideal for use in vacuum applications.Key Attributes Exceptionally pure - does not contain any inorganic fillers which may cause particulation problems. Excellent chemical and temperature resistance. Excellent mechanical properties. Extremely low out-gassing properties making it ideal for vacuum sealing applications. High material compliance reduces surface permeation. Reduced first wafer effect. Lower cost of ownership. Typical Applications Dynamic seals Static seals Wafer-handling products

POLYKING® PET Thermoplastic polyester is with very high mechanical property, heat resistance, good electrical properties, excellent chemical resistance and oil resistance. The molding part is dimensional stable and excellent surface appearance etc. It is widely used in electrical and electronic, mechanical and automotive fields.

Pentamid B GV30 H2 RC S black is a normal viscosity, highly heat stabilized polyamide 6, 30% glass fiber reinforced, recompound.

Fainplast Compounds Fainplast™ PVC KL 01589 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

Idemitsu Chemicals Xarec® SP140 is a Syndiotactic Polystyrene (SPS) product filled with 15% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

The Melochem 736 Dry Granulated Molding Compound are based on melamine-formaldehyde resins fortified with high-class cellulose as reinforcement and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. Our Melochem 736 grade is a general-purpose injection grade. Chemical components are chosen with the purpose of minimizing the potential risks to working environment and nature. The Melochem 736 Molding Compounds can be supplied in most colors from translucent pastels to black. Molded parts are free from odor, light stable and have good moisture resistance and water absorption and are therefore dishwasher safe. Excellent surface hardness and glossy surface is combined with excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack the materials and they are also resistant to surfactants and weak bases. They will withstand attack from weak acids fro a shorter duration. Oxygen index is 40% and is achieved without the use of external flame-retardants. No halogens are present in the composition.

POLYKING® PPS is one of the best heat resistant engineering plastic, it is a new type liner polymer, which has excellent mechanical strength, heat resistance, good electrical property, strong resistance to chemical corrosion, etc. Besides, it has other good merits, such as low mold shrinkage, low water absorption, intrinsic fire proofing, especially when under high temperature, high humidity environment, it still has excellent electrical insulation.

Sindustris ABS LER571 is a high flowability.

Sylvin Technologies Sylvin™ 913-70UV Black is a flexible vinyl compound formulated for extrusion or molding applications that require an ultra violet stabilizer and a non migrating plasticizer for improved heat and chemical resistance.

POLYKING® PPS is one of the best heat resistant engineering plastic, it is a new type liner polymer, which has excellent mechanical strength, heat resistance, good electrical property, strong resistance to chemical corrosion, etc. Besides, it has other good merits, such as low mold shrinkage, low water absorption, intrinsic fire proofing, especially when under high temperature, high humidity environment, it still has excellent electrical insulation.

RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.

Pentamid B GV35 H2 RC S black is a normal viscosity, high heat stabilized polyamide 6, 35% glass fiber reinforced, recompound.

Starex SR-0300 by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Fainplast Compounds Fainplast™ PVC HGK 83/1 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

Fainplast Compounds Fainplast™ PVC HGK 80/2 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

Viton® /FKM/FFKM is the most specified fluoroelastomer, wel known for its excellent (400°F/200°C) heat resistance. Viton@ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration. Viton® is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings and other molded components. We mold Viton@ O-rings for a variety of applications in the aerospace and industrial markets. Viton® O-rings are ideal in oil field applications where Viton® can resist aggressive properties of natural gas and oils.

Toray Siveras™ LX70T35H is a Liquid Crystal Polymer (LCP) product filled with 35% glass\mineral. It is available in Asia Pacific, Europe, or North America. Typical application includes Outdoor Applications. Primary characteristics are flame rated.

Kolon Industries Kopa® KN1322V0 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, Latin America, or North America. Characteristics includes flame rated, RoHS compliant and flame retardant halogen free heat resistant.

PA66 GF/MF reinforced

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 97 is blue colored anthraquinone dye. It provides high heat resistance, very good migration fastness and excellent light fastness. This grade is recommended for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PBT, PC and PA 6. Solvent Blue 97 can be used in PA 66.