Products in Sports & Recreation: Automotive Applications

WIC PA6 40 BK is a polyamide 6 base polymer filled with 40% carbon fiber and colored black. It has medium viscosity and is heat-aging stabilized, making it suitable for the automotive and sport market segments. Pre-drying conditions involve drying at 80°C in a dry-air dryer for 2-8 hours, depending on moisture content, with a maximum moisture content of 0.12%. Processing conditions involve injection molding with a melt temperature of 250-270°C and a mold temperature of 60-100°C. Under certain conditions, the increased thermal conductivity must be taken into account for optimal performance.

WIC PA6 20 N is a polyamide 6 base polymer with 20% carbon fiber filler which has a natural carbon optic color. It has medium viscosity and is heat aging stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 60-100°C. However, the increased thermal conductivity should be taken into account under certain conditions. This product is suitable for the Automotive and Sport market segments.

WIC PA66 20 N is a base polymer composed of Polyamide 66, 20% carbon fiber, and natural (carbon optic) color. It has medium viscosity, is heat-aging stabilized, and is suitable for the automotive and sport market segment. Pre-drying conditions should be at 80°C in a dry-air dryer for 2-8 hours, depending on moisture content, with a 0.12% maximum moisture content. Processing conditions should involve injection molding, with a melt temperature of 280-300°C and mold temperature of 80-120°C. Under certain conditions, increased thermal conductivity must be taken into account.

WIC PA66+6I/6T 40 BK is a heat aging stabilized Polyamide 66-based polymer with 40% carbon fiber filler and a black color. It is mainly used in the automotive and sport market segments. Pre-drying conditions include a dry-air dryer for 2-8 hours, with a maximum moisture content of 0.12%. Processing conditions include injection molding at a melt temperature of 280-300°C and a mold temperature of 80-120°C. Under certain conditions, the increased thermal conductivity must be taken into account.

WIC PA6 10 N is a polyamide 6 base polymer with 10% carbon fiber filler, in a natural (carbon optic) color. It has medium viscosity and is heat aging stabilized. For optimal results, it should be pre-dried at 80°C in a dry-air dryer for 2-8 hours, depending on moisture content, with a maximum moisture content of 0.12%. Processing conditions require injection molding with a melt temperature of 250-270°C and a mold temperature of 60-100°C. This material is suitable for the automotive and sport market segments. It should be noted that under certain conditions, increased thermal conductivity should be taken into account.

WIC PA66+6I/6T 30 BK is a polyamide 66 reinforced with 30% carbon fiber and a black color, designed for the automotive and sport markets. It is heat aging stabilized and should be stored in a dry, light-protected environment. The processing conditions involve injection molding with a melt temperature of 280-300°C and a mold temperature of 80-120°C. Under certain conditions, the increased thermal conductivity must be taken into account for optimal performance.

WIC PA6 30 N is a heat-aging stabilized polyamide 6 base polymer filled with 30% carbon fiber and is natural (carbon optic) in color. It is suitable for injection molding, with a melt temperature of 250-270°C and a mold temperature of 60-100°C. Pre-drying conditions require the material to be dried in an air circulating dryer for 2-8 hours at 80°C, depending on the moisture content, with a maximum moisture content of 0.12%. Additionally, under certain conditions, the increased thermal conductivity should be taken into consideration. This material is used in the automotive and sport markets.

WIC PA66 30 BK is a Polyamide 66 base polymer filled with 30% carbon fiber and black in color. It has medium viscosity and heat aging stabilized features, making it suitable for use in the Automotive and Sport Market Segments. Processing Conditions involve injection molding, with a melt temperature of 280-300°C and mold temperature of 80-120°C. It is important to note that the increased thermal conductivity must be taken into account when processing the material.

WIC PA6 15 N is a polyamide 6 base polymer filled with 15% carbon fiber, with a natural (carbon optic) color. It has medium viscosity and is heat aging stabilized. It is suitable for use in the Automotive, Sport, and other markets. Pre-drying Conditions should be 80°C in a dry-air dryer for 2-8h, depending on the moisture content, with a maximum moisture content of 0.12%. Processing Conditions should include injection molding at a melt temperature ranging from 250-270°C and a mold temperature of 60-100°C. Under certain conditions, the increased thermal conductivity should be taken into account.

XECARB® ST 30-C30 is a 30% carbon fiber reinforced PA6.10

XECARB® ST 22-C30 is a reinforced PA6.12

Adell Plastics, Inc. Adell™ Polyamide BR-14 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-14: Flame Rated.

XECARB® ST 20-C30 is a 30% carbon fiber reinforced PA11

XECARB® ST 30-C30-HM is a 30% carbon fiber reinforced PA6.10

NYCOADAPT 2065 is a medium viscosity Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability.

XECARB® ST 21-C30 is a 30% carbon fiber reinforced PA12

XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66

Adell Plastics, Inc. Adell™ Polyamide BR-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-13: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BL-38 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America.Typical application of Adell Polyamide BL-38: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.

XECARB® ST 29-C30 is a 30% carbon fiber reinforced PA4.10

PA 6 reinforced with glass fiber, flame retarded

PA 6 reinforced with carbon fiber

PP Copolymer Industrial Black 20% Talc filled

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

RE-FLEX® 885AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

TPE-S, Shore A25, natural

PLASMER® 2055B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 2055B/N can be reused without scrap during processing.

PA 66 reinforced with carbon fiber, heat stabilized

TPE-S, Shore A50, natural

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.

PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Domamid® 66G50HR1 is polyamide 66, 50% glass fiber reinforced, hydrolysis stabilized, is used for injection molding.

PP Copolymer Natural 30% Mineral filled

Wellamid® 6000 SUVCP by CP-Polymer Technik is comprised of Polyamide 6. It is commonly used It is available in Crystal form.

TPE-S, Shore A60, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12