Products in Other Consumer Goods Applications: Good Mold Release

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business NORYL GTX944 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance along with improved processability and increased impact performance. NORYL GTX944 resin may be an excellent candidate for Firefighter Helmet applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Arnitel® EM400-B is a high-performance thermoplastic copolyester (TPC) known for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. Across industries such as automotive and E&E, it is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material is specifically processed using injection molding technology and contains a release agent. Additionally, it meets the requirements for food contact quality.

BRUGGOLEN® P252 is a synergistic mixture of various nucleating and lubricating substances. It is our highly-efficient nucleating agent for polyesters. Reduction of cycle time during injection molding Improved dimensional stability - significant reduction of warping in GD-reinforced compounds Improves mechanical properties (tensile strength, stiffness, etc.) Increases heat distortion temperature Non-volatile Non-extractable

Flame resistant grade, Weather resistant grade

Transparent Flame Retardant

Sylvin™ 9783-77 Black is a vinyl compound formulated for molding applications to improve mold release.

Sylvin™ 7842-80 Black is a vinyl compound formulated for injection molding applications that require good mold release.

Sylvin™ 9784-77 Black is a vinyl compound formulated for molding applications to improve mold release.

Sylvin™ 7842-75 Black is a vinyl compound formulated for injection molding applications that require good mold release.

Sylvin™ 9789-73 Black is a vinyl compound formulated with a non ortho phthalate plasticizer for injection molding applications that require good mold release.

Characteristics: Very high flow rate control reologhy Impact block copolymer polypropylene; good impact/stiffness balance; ease of processing allows increased design freedom and higher productivity; excellent dimensional stability; good surface finish color; with nucleant and mold release additives. Recommended for: Injection molding of thin complex parts; housewares and consumer products.

Osterman & Company Inc. Osterlene® PPC10-SHI is a high impact copolymer designed for consumer and industrial applications. Features include good colorability, good dimensional stability, good mold release and thermal stability, medium flow and nucleated.Applications include containers, industrial applications and pallets.

Sylvin™ 9756-70 Red 654 is a vinyl compound formulated for molding applications to improve mold release.

Characteristics: Control reologhy Impact block copolymer polypropylene; excellent impact/stiffness balance; consistent processability lot to lot; high process speed and easy removal of the molded pieces; good superficial gloss; moderately narrow molecular weight distribution; with mold release and antistatic additive. Recommended for: Extrusion compression molding or injection molding processes of closures for carbonated beverages or not, where high stiffness and impact resistance is necessary (warm or cold environmental); housewares; injection molding general purpose applications.

Sylvin™ 9785-82 Black is a vinyl compound formulated for molding applications to improve mold release.

Silopren™ LSR 2003 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LSR2003 elastomer is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.LSR2003 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and BenefitsLSR2003 liquid silicone rubber is distinguished by the following properties: Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in consumer goods applications such as: Corn Pads Heel Inserts Shoe Insole Vibration dampers.

Sylvin™ 9751-73 Black is a vinyl compound formulated for injection molding applications that require good mold release.

Teijin Limited Panlite® LV-2225Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® LV-2225Y are: Flame Rated Good Mold Release Low Viscosity

Weather Resistant grade

Silopren™ LSR 3786/20 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It starts typically between a few hours and one day after vulcanization. Silopren™ LSR 3786/20 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3786/20 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3786/20 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

General Injection Medium Viscosity With externally Lubricated

Transparent Flame Retardant

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; fast cycle time; good impact resistance; with clarify and mold release additives. Recommended for: High clarity and good impact resistance injection molding housewares; thin walled injection molding package and general purpose applications where clarity is important.

Teijin Limited Panlite® L-1250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® L-1250Y are: Flame Rated Good Mold Release Medium Viscosity

Frictional wear resistant grade

Teijin Limited Panlite® K-1300Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® K-1300Y are: Flame Rated Good Mold Release High Viscosity Typical applications include: Film Sheet

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; fast cycle time; good impact resistance; with clarify and mold release additives. Recommended for: High clarity and good impact resistance injection molding storing boxes (big storage containers); thin walled injection molding package and general purpose applications where clarity is important.

Sylvin™ 9218-83 Natural is a vinyl compound formulated for molding applications to improve mold release and stability.

Sylvin™ 9785-79 Black is a vinyl compound formulated for molding applications to improve mold release.

Teijin Limited Panlite® L-1225Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225Y are: Flame Rated Good Mold Release Low Viscosity Typical application of Panlite® L-1225Y: Automotive

Flame resistant grade, Non-bromine/non-phosphor type

18 MELT FLOW HIGH STIFFNESS COPOLYMER POLYPROPYLENE FOR INJECTION MOLDINGPinnacle Polymers Polypropylene 8118H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This copolymer is intended for use in housewares, consumer products and any application requiring both high stiffness and good impact. Contains nucleator and antistat.The 8118H product provides: High stiffness and good impact strength Excellent mold release Superior processability Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Teijin Limited Panlite® L-1225LM is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225LM are: Flame Rated Good Mold Release Low Viscosity

55 MELT FLOW MEDIUM IMPACT COPOLYMER POLYPROPYLENE FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This controlled rheology copolymer is intended for use in thin wall injection molded packaging, housewares and consumer products applications. Contains nucleator and antistatic.The 2150H product provides: High stiffness Excellent impact at 23°C and -30°C High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle's 2150H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

22 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH ANTISTAT AND NUCLEATION FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1120 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for molding of cutlery, closures, thin wall containers and other consumer products. 1120 Z contains both a nucleation and antistatic additive system.The 1120 Z product provides: Superior stiffness Good static charge dissipation High speed processing: very fast cycle time Excellent mold release Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.