Products in Other Consumer Goods Applications: Waxes

IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables.

MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

Slack waxes, as opposed to fully refined waxes, have an oil content of from 5 to 30%, depending on the product. They are a welcome by-product of the production of lubricating oils. They can be productively employed in many industrial processes as they are; or they can be mixed, blended, or further refined. The melting points of slack wax varies from 105°F to 150°F. Some examples of applications for slack waxes: in wax emulsions, as binders and water-proofing in artificial woods; in matches; in jar candles; in rust-protection products; in industrial lubricants; in arena-footing; in soil or turf protection; and in fireplace products.

Trecora Chemical CWP400E is a polyethylene wax. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Quality Minerals POLYETHELENE WAX is the trade name of Quality Minerals PCL is polyethylene wax. It has unique polymer properties that make them suitable for many applications. Q-plas EW is produced in pellet/flake form using state-of the art equipment from Federal Republic of Germany.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Petrolatum is derived from high-viscosity, paraffin-based crude oils. Petrolatums contain minute (or micro), crystalline waxes. Oil is occluded within and between these small crystals. Petrolatum contains both paraffinic and olefinic hydrocarbons; the olefinic hydrocarbons. Olefinic hydrocarbons give petrolatum its "slippery" (oleaginous) character.

Dalian Lonsin New Materials LS1802 is microcrystalline wax.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Slack waxes, as opposed to fully refined waxes, have an oil content of from 5 to 30%, depending on the product. They are a welcome by-product of the production of lubricating oils. They can be productively employed in many industrial processes as they are; or they can be mixed, blended, or further refined. The melting points of slack wax varies from 105°F to 150°F. Some examples of applications for slack waxes: in wax emulsions, as binders and water-proofing in artificial woods; in matches; in jar candles; in rust-protection products; in industrial lubricants; in arena-footing; in soil or turf protection; and in fireplace products.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

SILWA® WAX KL-G is ductile microcrystalline waxes, solid.

Petrolatum is derived from high-viscosity, paraffin-based crude oils. Petrolatums contain minute (or micro), crystalline waxes. Oil is occluded within and between these small crystals. Petrolatum contains both paraffinic and olefinic hydrocarbons; the olefinic hydrocarbons. Olefinic hydrocarbons give petrolatum its "slippery" (oleaginous) character.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.