Products in Housewares: Containers

St. Joseph Plastics PPCP 615 BLACK 100% PCR is a Post-Consumer Polypropylene. It is available in Gray, Black, or Tan.

GRAYFIN PPH30 is made up of pellet materail structure with homopolymer type.

Characteristics: Control reologhy Impact block copolymer polypropylene; high impact/stiffness balance; good thermal stability and chemicals resistance. Recommended for: Injection molding of batteries cases, buckets, industrial parts, toys, containers; injection and extrusion molding general purpose applications.

Clyrell RC5056 is a polypropylene random copolymer designed for excellent clarity and gloss with rigidity and thermal resistance balance. This grade is selected by customers for use in transparent injection molding articles and containers. Clyrell RC5056 complies with FDA cooking condition.

XINOMER® PE HFFR 1005 is a flame retardant booster system that increases the flame-retardant effect in halogen free, flame retardant, thermoplastic compounds even at low addition levels. The HFFR products are available with various base resins for both injection molding and extrusion applications.

Pennacle® 66B158 is a Black Pigment Additive. During our initial development of Pennacle®, a palette of pigments and dyes were established that had little to no effect on the rate of crystallization of PET. From this, a series of industry standard colors were developed and sent to an outside lab for analysis. Free Blow experiments were conducted to evaluate the effect of Pennacle® on Natural PET resin. In two stages preforms were molded, then conditioned and free blown to evaluate blow parameters and physical properties. The results of these experiments are listed below. This palette is the basis for all Pennacle® color matches made today in PET.

Osterman & Company Inc. Osterlene® PPH035LWC is a polypropylene homopolymer designed for injection molding, general purpose, and Low Water Carryover applications.Suggested uses for PPH035LWC includes tape, slit-film, fibers, containers, closures and housewares.Osterlene PPH035LWC meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Itiplen Ih M20 C40 is a homopolymer copolymer with calcium carbonate filler. It is also used in injection molding.

SUNOX® 168 is a secondary high performance phosphite antioxidant for organic polymers. Exhibits reduction in polymer degradation during processing. Provides improved gas fading performance in many applications. Imparts higher phosphorous content than competitive phosphite antioxidants.

PTSHDL5-B420 (HDPE) has little branching, giving it stronger intermolecular forces and tensile strength than lower-density polyethylene. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C for short periods, 110 °C continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally-required autoclaving conditions.

Moplen HP400M is a General purpose polypropylene homopolymer resin

TATREN IM 55 80 is a reactor impact copolymer of good processing stability and high fluidity. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mold release in the injection molding process. TATREN IM 55 80 is characterized by excellent organoleptic properties (low taste and odor), high stiffness/impact balance and good flow.

Pennacle® 66B119 is a Black Pigment Additive. During our initial development of Pennacle®, a palette of pigments and dyes were established that had little to no effect on the rate of crystallization of PET. From this, a series of industry standard colors were developed and sent to an outside lab for analysis. Free Blow experiments were conducted to evaluate the effect of Pennacle® on Natural PET resin. In two stages preforms were molded, then conditioned and free blown to evaluate blow parameters and physical properties. The results of these experiments are listed below. This palette is the basis for all Pennacle® color matches made today in PET.

RG 2300 L is a Polypropylene Block Copolymer Impact Copolymer. It is used in General Injection Molding, House Wares, Closures, Cylindrical Containers, Furniture

PLASgran HIPS-0408 is a black, medium MFI HIPS from predominantly post-industrial sources, suitable for injection molding, compounding applications.

Liveo 937 Q7 is an early shrink start transparent film with high shrink properties and high clarity making it an optimal choice for full body shrink sleeves on thin walled HDPE, PET and glass containers.

AO 11B is an antioxidant additive with PE Resin.

20 MELT FLOW IMPACT COPOLYMER POLYPROPYLENE Pinnacle Polymers Polypropylene 2120H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for large buckets and other injection molding applications where toughness and cold temperature impact strength are required.The 2120H product provides: Excellent cleanliness Superior toughness Excellent color and process stability Good melt strength Fast Set-up time UL Listed Pinnacle's 2120H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

Nipolon® Hard 8600A is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion, or injection molding.Important attributes of Nipolon® Hard 8600A are: Good Processability High Hardness High Strength Typical applications include: Containers Bags/Liners Bottles Consumer Goods Household Applications

Characteristics: Low melt flow rate Impact Block Copolymer polypropylene; very high impact/stiffness balance. Recommended for: Compounding for the automotive industry; sheet extrusion, Cartonplast; high volume extrusion blow molding containers; extrusion thermoforming of containers that require conservation at temperatures below 0°C; extrusion and injection molding general purpose applications.

Metiplen 002 HDPE White has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

RG 3348 SC is a Polypropylene Random Copolymer With Good Transparency and Good FLowability. It is used in High Transparent and Flexible House Wares, Low Warpage Thinwalled Parts, Containers Wit Snapfit Lids

BLACKFIN PPH20 is made up of pellet materail structure with homopolymer type.

Laser+® W PJ002 (F43A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection blow molding or stretch blow molding.Important attributes of Laser+® W PJ002 (F43A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable Medium Viscosity Typical applications include: Containers Food Contact Applications

3.5 MELT FLOW CLARIFIED HOMOPOLYMER FOR THERMOFORMING APPLICATIONSPinnacle Polymers Polypropylene 1403N is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for extruded sheet and thermoforming applications. The combination of flow characteristics and high stiffness provide light-weighting potential for containers. 1403N contains a clarifier providing excellent see-through clarity.The 1403N product provides: Superior color and processing stability Good melt strength and stretchability High clarity Low level of extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Osterman & Company Inc. Osterlene® HD600-U is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and good balance of stiffness and impact resistance.Typical applications for HD600-U include cases, tote bins, crates and trays and open-head pails.HD600-U contains UV stabilizer for use in applications with exposure to sunlight.HD600-U meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information. articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Asrene® SI 5230 is a High Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® SI 5230 include caps/lids/closures, containers and household applications.Characteristics include: Fast Molding Cycle Food Contact Acceptable Good Stiffness High Gloss

Metiplen 001 LDPE Transparent has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

2MILA PE2NT22 - 12 is intended for further processing by injection molding into articles for household and domestic use with increased cracking resistance such as bottle caps, box covers, caps, boxes, containers, trays, housewares, injection syringe parts and needles, toys.

Diamond GP-500 N is a highly transparent material. It gives excellent mechanical and heat resistance properties while providing with easy process ability and molding applications.

Gulf Acrylics Industries SAN is a copolymer plastic consisting of styrene and acrylonitrile. It is commonly known as SAN and is widely used in place of polystyrene owing to its greater thermal resistance. The Acrylonitrile content not only improves mechanical properties and chemical resistance, but also adds a blue tint to the normally transparent plastic. SAN sheets combines the formability, dimensional stability, density and bright clear transparency of polystyrene with heat resistance, strength & stiffness of acrylonitrile. These extruded copolymer sheets are highly resistant to water absorption and chemical products.

Prime Polymers Evolue® H SP65051B is a High Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America.

Evalene® HJ20571 is a fully formulated resin with narrow molecular weight distribution and is specifically designed to meet the performance requirements of a broad range of injection molding applications requiring an excellent combination of good impact strength/stiffness balance, stress- crack resistance and ease of processing.

Liveo 305 Q6 is a transparent film with medium shrink properties, high clarity and tough impact resistance, making it an optimal choice for tamper evident bands or fully printed promotional shrink labels.

Trilene BI5.0GA is an Impact Copolymer Polypropylene (ICP) for plastic pallet, pail for paint container, automotive, electrical and general purpose injection molding application requiring good impact strength.This grade uses Unipol® polypropylene technology with latest catalyst technology.

Laser+® HS CF746A (D53A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection stretch blow molding.Important attributes of Laser+® HS CF746A (D53A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable Good Esthetics Typical applications include: Food Contact Applications Containers Packaging