Products in Furniture: Polyamides

NYLOY® MG-0033N has a heat resistance with high stiffness and dimensional stability.

Natex P-Preg PA11 P1/1 900 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polyamide 11 with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.

NIRETAN A AE/V0 is regionally available in Europe.

UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.

NYLOY® MG-0833B has a heat resistance with high stiffness and dimensional stability.

Co-solvent soluble polyamide resin 100% Solids

UNI-REZ 2656 hot melt polyamide adhesive is a resin-based on dimer acid. UNI-REZ 2656 hot melt polyamide adhesive has excellent low-temperature impact resistance and good adhesion to polyolefin.

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

66G30 is a grade of Reinforced Flame Retardant Polycaprolactam which offers high mechanical properties, good heat resistance, good dimensional stability, good flammability, good processibility. Reinforced flame retardant PA66 is used for automotive parts, furniture parts, electric tool, transformer skeleton, thin-walled relay, electric device parts, residual current operated protective devices, electrical appliances parts, vision parts, etc.

Kiamid 6 S3C-1.1 NT is a unamplified Polyamide 6.

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

RESIMID B2800 G1.5 is Polyamide 6 with 15% glass fiber.

Grupo Repol B1S25 G30PV0 is 30% Glass Reinforced, V-0 Rated (Phosphorous) Nylon 6.

Tarnamid® T-27 GF30 V0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

REPREVE® Recycled Nylon 6 opens up a world of possibilities for companies wanting to use recycled high-quality nylon materials. For every 1 lb, of REPREVE® Nylon, 77,000 BTU'S (British Thermal Units) are conserved, equivalent to 0.6 gallons of gasoline. Pre-consumer fiber waste is collected. Collected waste then enters a unique material conversion process where it is reformulated to produce a first quality REPREVE® Recycled Nylon 6 chip. REPREVE Nylon 6 does not contain post-consumer plastics.

UNI-REZ 2224 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose and very low viscosity, allowing for high heat resistance and high color strength.

RESITEC B28 G3 BLACK (ROHS) is Polyamide 6 with 20% glass fiber and ROHS certificate. It is a compound with industrial quality.

BARLOG plastics GmbH Kebablend® / WR 04/2530/2115 is a tribologically modified special compound based on PA66 with 30% glass balls and 15% PTFE. The product is characterized by increased rigidity, isotropic shrinkage behavior, good sliding behavior and high wear resistance.

Grupa Azoty S.A Tarnamid® T-27 MK30 is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MK30 are: Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Good Esthetics Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

RESIMID A2880 EL is high impact modified Polyamide 6.6.

The performance of UNI-REZ™ thixotropic polyamide is far superior to other competitive technologies and is used to control the rheology of non-drip structured varnishes and varnishes. Kraton thixotropic products are non-reactive polyamide resins for thixotropic alkyd resins.

UNI-REZ 2934 polyamide resin is a co-solvent type resin offering excellent low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 2934 offers better blocking and gloss properties in comparison with other modified co-solvent types.

UNI-REZ 2641 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2641 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

UNI-REZ 2721 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2721 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 119 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 119 polyamide resin was developed for release lacquers and has the lowest solution viscosity but fast solvent release.

Sebamide 6 S3CH-13 is a unamplified Polyamide 6.

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2722 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2722 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2638 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2638 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2651 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2651 hot melt polyamide adhesive has excellent low temperature impact resistance and good adhesion to polyolefin.

EASYMID B GF5O BKIG is an PA6 50% gf black and recycled polyamide (PA) compound obtained from post-industrial waste (PIR) in the quantity between 70% and 98%, named EASYMID.

The virgin base resins of Polyamide 6 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon B help to preserve natural sources.

UNI-REZ 2635 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2635 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

RESITEC IQ A28 G3 BLACK is Polyamide 6.6 with 30% glass fiber. It is a compound with industrial quality.

An alcohol soluble resin. Used in flexographic printing inks for plastic substrates. Provides the fastest solvent release in our alcohol soluble polyamide resin series and is compatible with modifiers commonly used in alcohol inks.