Products in Footwear: Plasticizer

Santicizer® Platinum P-330 is a non-phthalate, primary plasticizer with high performing product characteristics meant to outperform existing general purpose plasticizing alternatives. This plasticizer has some high solvating character to boost compatibility and plasticizing efficiency in multiple polymer systems. This product is highly recommended for PVC application where fast fusing would be a benefit.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

Di-isononylphthalate (DINP) is a phthalate used as a plasticizer with the formula c26H4204. It is usually used in a huge diversity of plastic items.

Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced processability, and lower volatility than traditional General-Purpose Plasticizers. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers. Santicizer® Platinum G-2000 has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product label.

PureFlex E1530 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Idesa Petroquímica Dioctyl Phthalate is virtually colorless, oily liquid, insoluble in water, miscible with mineral oils.

avanSTATIC SBR/EPDM is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

EKFLEX 983 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

avanSTATIC NBR 535 is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

PureFlex E1701 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

WSD-800 is a colorless transparent oily liquid PVC plasticizer obtained from vegetable oil through catalytic hydrogenation, hydrolysis, dehydrogenation, distillation and esterification.

Plastay DINP (Di Isononyl Phthalate) is usually used with materials such as PVC for plasticization, after heating to a soft or plasticized state, to obtain elasticity, brightness for plastic, create electrical resistance, prevent cracking and make the surface smooth. Do not allow the ingress of materials that will be removed from the mold.

Addiflam® SR10 can be applied by padding, various coating systems (instable, crushed stable foam, paste, kiss roll, lamination) either supplied as a ready-to-use compound or as an additive (powder, dispersions, emulsions, slurries) for self-compounding purposes. Cost effective tailor made solutions are available upon end use, manufacturing options and level of durability required.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

EKFLEX 882 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

EKFLEX 862 is a non-phthalate plasticizer based on dioctyl adipate (DOA), featuring outstanding performance and efficiency and imparting great flexibility to the plasticized material, even at low temperatures.

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Mediaplast NB-4 is a special adipine acid plasticizer at an exceptionally reasonable price for the use in polar polymers like NBR, H- and XNBR, CM / CSM, CR, ECO, etc. Mediaplast NB-4 is, due to its relatively low volatility and also because of its extremely low setting point, suitable for heat-resistant as well as cold flexible rubber articles (see technical data).

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

EKFLEX 1200 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

EKFLEX 883 is a colorless liquid plasticizer based on diisooctyl phthalate (DIOP) and isomers thereof, featuring excellent performance and providing great value for money.

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

EKFLEX 1300 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Mediaplast PX-2 is a semi-synthetic plasticizer based on long-chain hydrocarbons with paraffinic character. It is recommended to use in elastomers with low polarity, e. g. NR, IIR, BR, SBR and EPDM.

Kettlitz-Mediaplast NB-7 is a special diisononyl dicarboxylic acid ester which can replace existing phthalate plasticizers in compounds based on polar rubbers like NBR, HNBR, CR, ACM, VAMAC etc. Mediaplast NB-7 shows minor volatility at an extremely low setting point. Therefore this plasticizer is suitable to produce rubber articles with high heat resistance and excellent low temperature propertiesas well.

PureFlex O1580 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

EKFLEX 892 is a non-phthalate plasticizer based on trioctyl trimethylate (TOTM) that is particularly well suited for applications requiring good non-migration properties at high temperatures and retention of mechanical properties.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Ekflex 8815 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

PureFlex E1540 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

Hebei Jingu Plasticizer HY-B-20 is a kind of slight yellow viscous oily liquid, with viscosity of 325mpa.s, refractive index of 1.473 and density of 0.985. Epoxidized Soybean Oil is not soluble in water, but it is soluble in organic solvent, such as Hydrocarbon, ketone, lipids, higher alcohols, etc. and also slightly soluble in alcohol.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.