Products in Footwear: Automotive Exterior Parts

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Poly Chem Alloy PolyFoam 4004CF are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

TEXALAN® 285A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits High utilization rate, high strength and excellent processing performance

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

Texalan® 360A product has excellent processing properties, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Poly Chem Alloy PolyFoam 4004K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Texalan® 365A product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and bending resistance foldability.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

TEXALAN® 290A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance

Vinoplast 510 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Hangzhou Hi-Tech Fine Chemical AC6000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

MARFRAN® B TS is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. Compounds for injection and extrusion molding: soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

VinoPrene 700 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

TEXALAN® 298A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Poly Chem Alloy PolyFoam 1003K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Vinoplast 555 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Hangzhou Hi-Tech Fine Chemical AC4000 is specially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

Vinoplast 466 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

TEXALAN® 295A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

S&E Polymer Solutions V-TEM 150 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

Texalan® 380A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

Poly Chem Alloy PolyFoam 1004CF are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

S&E Polymer Solutions V-TEM 50 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

Rubaloy RA - 703G is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved extrusion rate, extrusion, molding and surface finish. Rubaloy-703G is Pthalate free.

Poly Chem Alloy PolyFoam 503K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.