Products in Footwear: Appliances

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy.   Applications:  Large components  Appliances  Automotive Interior Trim Boat Jet-propelled Vehicle    Features:  High Melt Flow    Benefits: Easy moldability with low pressure.  Consistently easy to color Quick cycle time

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts   Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding

Acti-Min® PG is a carefully produced, high quality, kaolin clay designed for the paint industry. It is also well suited to adhesives, sealants, and white rubber applications. Strict attention to the clay source and to process control assures a consistently high brightness and suitable particle size for the use in the contractor-grade paints. The naturally fine particle size of Acti-Min® PG keeps the +325 Mesh low and has a higher percentage of particles less than 0.5 microns compared to coarser clays. This size distribution allows the paint formulator to maximize the hiding power of titanium dioxide (TiO2), while reducing overall formulation cost.

Fluorescent dye for plastics

Fluorescent dye for plastics

Fluorescent UV-dye for plastics

Fluorescent dye for plastics

XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66

XECARB® ST 30-C30 is a 30% carbon fiber reinforced PA6.10

XECARB® ST 30-C30-HM is a 30% carbon fiber reinforced PA6.10

XECARB® ST 21-C30 is a 30% carbon fiber reinforced PA12

XECARB® ST 20-C30 is a 30% carbon fiber reinforced PA11

XECARB® ST 22-C30 is a reinforced PA6.12

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

XECARB® ST 29-C30 is a 30% carbon fiber reinforced PA4.10

Da/Pro Rubber SBR is an elastomeric copolymer that consists of styrene and butadiene. SBR has good abrasion resistance and good stability.

Poly Chem Alloy FlexPlast 5004K is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

MARFRAN® B TS is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. Compounds for injection and extrusion molding: soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

S&E Polymer Solutions V-TEM 150 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

S&E Polymer Solutions V-TEM 50 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

KPC® KT-LT by Kadakia Plastics and Chemicals is a low temperature (-45 °C) polyvinyl chloride (PVC) and nitrile butadiene rubber (PVC/NBR) alloy. Can be processed by co-extrusion. Possible applications of KPC® KT-LT could be could be seals, footwear upper & soiling, hose and tubing, compressed air hose, fuel line hose, building & construction, gaskets, weatherstrips, cables in arc welding, appliance and industrial.

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

MARFRAN® E FKK is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

Poly Chem Alloy FlexPlast 3804E is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Poly Chem Alloy FlexPlast 4092D is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Poly Chem Alloy FlexPlast 4005D is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Poly Chem Alloy FlexPlast 3905E is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Poly Chem Alloy FlexPlast 3874K is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

S&E Polymer Solutions V-TEM 200 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

MARFRAN® E M2 is a TPE-S SEBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable, high transparency.