Products in Consumer Goods: Foaming Agent

VINYFOR AC#6-K6 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Otsuka Chemical AZ H-115E is developed in order to solve these problems and to improve the overall efficiency of the foaming agent. Otsuka Chemical is ready to supply their variety of foaming agents for objected plastics, rubber, or ways of molding. Micro-fine foaming agent can easily worsen the working environment as well as making automatic weighing and supply difficult. Molding is also a concern in regards to worsening the foamed product.

TRACEL® NC 135 XF is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Hangzhou Hi-Tech Fine Chemical AC3000 is a common general-purpose high temperature foaming agent. Use a wide range of plastic and rubber foam, such as the PE (IXPE), PS, EVA, PVC, and NBR, SBR, and rubber mixture is especially suitable for PVC coating; commonly used inmolded PE, PVC extrusion and rubber molded foam; can be used for EVA MD injection and large and small mold hot pressing foam is widely used in insulation materials, sports equipment handle and shoe.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Ficel® SBH II is used as Styrenics, Polyolefin.

Sinobase Polymers Chemical ACP-W Blowing Agent is a mixture of AC, DPT blowing agents and other additives. Foaming at low temperature and giving stable performance.

VINYFOR DW#6 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Sinobase Polymers Chemical AC-05 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

BTec™ BSI-7100-VFL is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.

Sinobase Polymers Chemical AC-02 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

TRACEL® TSE 3140 ACR MICRO is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Ficel® HC 01 is used as Flexible PVC.

Hangzhou Hi-Tech Fine Chemical HH130 blowing agent is artificial leather processing characteristics by careful modification of the AC blowing agent from leatherette special foaming agent for PVC artificial leather, foam. It can also be used for the production of soft PVC non-slip pad andsemi-PU leather foam soft PVC products for the production of the foaming agent has a good cell structure and good whiteness.

Ficel® HC ES 3050 is used as Flexible PVC, Rigid PVC, Polyolefin.

Foam™ LBA-135 are foaming agents have been used to reduce the densities of molded and extruded thermoplastics. Today, this need is receiving more attention because of the desire to make plastics more sustainable. This can be accomplished by reducing the amount of plastic needed to make a finished product. By reducing the density, you have reduced the amount of plastic used to make molded parts and extruded products, thereby reducing your carbon footprint. Liquid foaming agents can be metered precisely into the melt flow to achieve the desired level of density reduction and are produced without a heat history eliminating pre-decomposition concerns. The selection of endothermic, exothermic, or a combination of both is available in our product line. Processing with liquid endothermic foaming agents will also reduce the energy required for your process.

BTec™ BSI-9100-AP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

New Particle Chemical Colors Corp. 7300 FOAMING PLASTIC MASTERBATCH is a most widely used Nitrogen foaming Masterbatch For Foamed Plastics. Foaming plastic masterbatch 7300 is particularly adapted for use in unicellular products where low gas loss be diffusion is required since it blows by releasing nitrogen.It is non-odorous in itself and imparts no odor to the finished products for which it is used and may be used in white or light colored compounds without the objectionable discoloration and staining obtained with many organic chemicals although it is a yellow pellet, the decomposition residue by heat is white. 7300 is broadly used blowing agent for most polymers processing, and should not be used with beryllium or copper tooling in injection molding structural foam.

BTec™ BSI-8150-FP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

MASTERFRAN® FM 05032 A is a TPE compund for caps and closures. It is designed specific materials for the cork industry: specifically, closures for wine, spirits and spirits. Our materials are easy to print, colorable, recyclable, phthalate free.

Hangzhou Hi-Tech Fine Chemical HH-JS is mainly used for PVC and PS profiles, plates, sheets of extrusion injection foam, such as blinds, picture frames and other low-foam plastic products, TPR soles and high-grade PVC injection slippers, sandals.

TRACEL® NC 135 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

TRACEL® G 5193 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

VINYFOR SE#30 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Cel-Span® CFA 844 is a highly loaded 80% active endothermic foaming agent formulated for applications with high gas requirements. Cel-Span® CFA 844 concentrate releases carbon dioxide gas upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, a color common to endothermic chemical foaming agents.

Poly Chem Alloy PolyFoam DCE5A are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

VINYFOR AC-1L-C is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

BTec™ BSI-8100-VL is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

VINYFOR AC#3SW is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Ficel® EPE is used as Rigid PVC/Flexible PVC/Plastisol.

Poly Chem Alloy PolyFoam 2004CF are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

TRACEL® G 3191 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

BTec™ BSI-8080-FP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

Hangzhou Hi-Tech Fine Chemical DNA-G is mainly used for PVC and PS profiles, plates, sheets of extrusion injection foam, such as blinds, picture frames and other low-foam plastic products, TPR soles and high-grade PVC injection slippers, sandals.