Products in Consumer Goods: Silicones

Andisil® EM Silicone Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 12,500C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 10,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 350 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 1,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 60,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM Silicone Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 100C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 10,000 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 350C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® SPR 2833 Clear is a reactive silicone primer that can be used to improve adhesion of various RTV silicones to a variety of substrates including: metal, wood, glass, ceramics and many plastics. It is useful in formulations where a clear primer is preferred.

Andisil® EM 12,500 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

CGSTAPE - 5458 is a 2 mil polyester film backing with silicone adhesive. High performance, flexible, high temperature re-sistant polyester tape. Removes cleanly after use.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

PEL-SIL™ 1316 silicone surfactant is compatible with polyols and specially designed for use with pentane in both appliance formulations and laminated continuous rigid board foam. PEL-SIL™ 1316 is designed to maximize the k value both initially and in long term aging. PEL-SIL™ 1316 will produce foam with excellent flowability and a high percent of closed cells.

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.

CGSTAPE - 8258K is a Kapton® HN backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

CGSTAPE - 8258 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

CGSTAPE - 8458 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

CGSTAPE - 8958 is a anti-static treated polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat.

117-33 is a flexible, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 117-33 include, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 117-33 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features High-temperature flexible conductive adhesive

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

STG-40 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

PEL-SIL™ 9868 is a silicone surfactant that is polyol compatible and especially designed for compatibility with pentane. It is useful in appliance insulation formulations and laminated continuous rigid board foam. PEL-SIL™ 9868 is designed to maximize the k-factor in initial and long term aging in pentane blown foam. With the above blowing agent it will produce foam with excellent flow characteristics, a high percent of closed cells and improved compressive properties.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

CGSTAPE - 8468 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

KIRAKURU AL-07 is an aldehyde odor scavenger.

PEL-SIL™ 1315 is an efficient isocyanate or polyol compatible, liquid surfactant especially designed for isocyanurate applications. In isocyanurate formulations, it will produce foam with excellent flowability under a variety of foaming conditions. Other applications include foam for low density appliances. Flame retardant transportation and construction foams, and high density water blown formulations. A good starting point would be 0.5 to 0.9% of PEL-SIL™ 1315 on the total weight of the reactants.