Products in Consumer Goods: Polyols

EXAPOL SU 490 B is sucrose - glycerin based polyether polyol of moderate functionality and medium viscosity.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Synergist 120 is powdered polyol/synergists for our Enflame series flame retardants. It promote the char formation and blowing auxiliary for the film formation to make the flame retardants more effective. It also aid in maintaining the properties involved in the process.

Polem A SD is a solvent free, low viscosity, two component polyurethane resin based sub membrane and porefiller.

Synergist 100 is powdered polyol/synergists for our Enflame series flame retardants. It promote the char formation and blowing auxiliary for the film formation to make the flame retardants more effective. It also aid in maintaining the properties involved in the process.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

CA - 4040U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Polem A 1145 is a branched, castor oil-based polyol.

EXAFLEX 6028 is a propylene oxide and ethylene oxide based trifunctional polyol. The calibrated amount of ethylene oxide with high primary end groups gives extra reactivity with isocynates allowing it to be used for one shot HR molded foam using high pressure as well as low pressure machines. The HR molded foam using EXAFLEX 6028 are characterized by high resiliency and good surface properties and good elasticity.

Puranol D 220 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Polem A is a branched, castor oil-based polyol emulsion.

Polem A 1150 is a branched, castor oil-based polyol.

Puranol G 303F is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Sehotech SP-240P is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

Polem A 1155 is a branched, castor oil-based polyol.

Puranol D 240 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

PETOL 250-3 is a polyoxypropylene triol, 670-average molecular weight. This polyether triol is used in the manufacture of rigid, semi-rigid and special flexible polyurethane foams. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. The product is also used in blends for applications used in the production of coatings, adhesives and casting elastomers.

EXAPOL SU 461 B is high functionality sucrose – glycerin based polyether polyol. Due to it’s high viscosity, it can be formulated to give very one cell structure rigid polyurethane foam of higher compressive strength. It is designed to give improved cyclopentane solubility.

PETOL 56-3 is a homopolymer triol, with nominal 3000 molecular weight, designed to increase the hardness of flexible foams and to produce CME (Combustion Modified Ether) flexible polyurethane foams. PETOL 56-3 is a BHT-free product that can be processed on various foam machines. PETOL 56-3 can also be used in polyol blends for rigid foams production.

Petol PP 451 is a non-reactive polymer polyol, with about 45% solid content and 3500 average molecular weight of standard polyol, designed to obtain enhanced load bearing flexible slabstock foams. PETOL PP 451 can be used individually or blended with other polyols.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

CARPOL® PGP-3815 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3800. This diol is a copolymer of propylene oxide and ethylene oxide. Main applications include C.A.S.E., however, Carpol® PGP-3815 may also be included as a component in other urethane products and formulations.

Petol PS 480-6 is a polyether polyol with high functionality, 6, obtained by propoxilation of sorbitol in basic catalyze.

Petol PA 450-3T is an aminic polyether polyol with high reactivity, obtained by propoxilation of Triethanolamine.

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Petol PA 500-5D is a highly reactive aliphatic amine polyether polyol, used in blending with other polyols for the production of rigid polyurethane foams for thermal insulation applied by spraying technique (roofs, floors, ceilings) or by molding technique (refrigerators, freezers, panels). Petol PA 500-5D has an auto-catalytic activity and thus reduces the catalyst requirements. It has a good compatibility with alkanes (n-pentane, cyclopentane) and also with HCFC.

Sehotech SH-517 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in semi-rigid foam.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

Carpol® PGP-2816 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2800 Da. This diol is polymerized with propylene oxide and then capped with 16% ethylene oxide. Main applications include C.A.S.E., however, Carpol® PGP-2816 may also be included as a component in other urethane products and formulations.

Polem A 1140 is a branched, castor oil-based polyol.

Petol PS 400-4G is a medium functional polyether polyol obtained by propoxilation of glycerin -sorbite mixture under catalyst conditions.

Sehotech SP-250Y is mainly applied in metal panels, spray foams, appliances and pour-in-place. It also has characteristics that provides good flow, improved HC and HFC stability.

Puranol D 204 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.