Brands in Consumer Goods

ECOTINT® TO contains 2 transparent iron oxides for wood finishing and paints applications. Due to their transparent nature, the wood structure remains visible.

09GREEN™ is a low viscosity / high strength retaining compound. 09GREEN™ bonds bushings, bearings, and gears to shafts, creating a plastic shim which seals the joint, prevents corrosion, and ultimately protects the shaft. It is also an excellent choice for high strength thread locking on medium size fasteners where high breakaway torques are required.

For resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability)

Scott Bader’s Texipol® range of rheology modifiers can be used in a variety of water-based formulations.A diverse range of thickeners and binders for the Artist Colors market.Texicryl® and Texipol® emulsions to enhance the workability and technical performance of products being supplied into the building and decoration market.With over 60 years’ experience, our range of PVA / acrylic binders and inverse emulsion thickeners deliver high performance in textile and furnishing products.

OrgaCon screen-printable inks are based on conductive polymer PEDOT/PSS patterning of transparent conductive structures from plain down to a resolution of 100 microns on flexible and rigid substrates such as PET, PC, PMMA, PI and glass. These inks can achieve excellent characteristics such as flexibility and formability for electrodes of electroluminescent lamps, capacitive touch sensors and membrane switches. OrgaCon clear conductive inks eliminate the need for ITO and provide flexibility not found using ITO.

Due to its excellent thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of high-performance plastics (HPM).

AFLAS® is a trade name for a fluoroelastomer polymer offering unique chemical resistance characteristics. Alpha Associates AFLAS® sheet material is recommended for fabrication into gaskets, seals, packings, washers, pads, shims, curtains, joints and other parts for use in severe operating conditions.

The Cri-Line® compounds described in this site are fully formulated high performance compounds, developed, tested and guaranteed by Cri-Tech, Inc. These Product Selection pages will enable you to quickly locate compounds that meet your specifications. Compounds are grouped by product type/families. Among them are products for most major FKM end-use applications and manufacturing processes. Cri-Line® FKM compounds range from 50 to 95 durometer, 65% to 71% Fluorine, bisphenol or peroxide cure system, and specialty grades such as BRE (base resistant) and low temperature. Compounds are generally supplied in several standard colors, but can be customized to support any color program. A Cri-Line® compound that you have ordered will arrive at your receiving dock accompanied by a certificate of compliance (including test data) for the lot shipped and ready for immediate processing without further modification.

Solkem is our thixotropic range resins for Paints and Coatings.

Paracril NBR grades are produced by cold and hot polymerization process. The cold process yields linear polymers with good processing characteristics and solubility in polar solvents. The hot polymerization process leads to more branching. Branching in the hot Paracril grades is more developed in the higher viscosity grades. The hot polymers offer improved green strength. &rosslinNed 3aracril N%5 grades are unique in processing and function.

SIPELL® range products add a broad range of properties to your individual formulations for the leather industry. They include optimizing durability, improving the feel and even making the leather permanently water repellent. The SIPELL® product range offers an extremely wide spectrum of effects for all applications: automotive, furniture and clothing leathers, shoe uppers and accessories.

ElectroCool® Dielectric Coolants are engineered for Single-phase, Liquid Immersion Cooling of Electronics. Servers, GPUs, FPGAs and other semiconductors operate at increasingly high energy densities and in ever smaller packaging. These factors, combined with increases in operational frequency and output power, make the effective removal of waste heat a key limiting factor in the design and efficiency of most electronics. Single-phase, Liquid Immersion Cooling (SLIC) is the most effective way to manage, remove, and control waste heat for electronics.

BENEBiOL™ is Polycarbonatediol (PCD);  linear polycarbonate with hydroxyl groups at both ends which has been developed by Mitsubishi Chemical Corporation. It can be used as a raw material of resins such as polyurethane. Because of the combination of the “key monomer“ of each grade and carbonyl group, polyurethane resins made from BENEBiOL™ will show superior properties in terms of durability, chemical/stain resistance, and flexibility for example. As some raw materials of BENEBiOL™ are biomass-based, BENEBiOL™ enables your product to be more sustainable.

High performance alkyds designed to provide the right balance of esthetic, protective and application properties for paints and coatings.

Fibertec's wollastonite products come in powder and fibrous grades. Powder grades tend to be used as fillers in coatings, adhesives, sealants and paints. It is an inert material with an alkaline pH that improves toughness, weather resistance and moisture absorption. Powders, while having some aspect ratio, all tend to be -325 mesh. Fiber grades have a diameter ranging from 5 to 15 microns and aspect ratios from 15 to 20. They are most commonly used as a lower cost, lower performance replacement for milled fibers in composites. They are compatible with all resins and may be surface treated. Fibertec wollastonites are acicular (needle-like) mineral products milled to various morphologies and bulk densities. These products can be surface treated to enhance performance in thermoset and thermoplastic resins. Fibertec wollastonite is used as functional fillers and reinforcements in composites (thermosets) and compounds (thermoplastics) to increase mechanical properties (tensile, flexural, impact), minimize distortion at elevated temperatures, improve dimensional stability, and provide low moisture absorption.

KRAIBURG continually tries to set new standards in technology, quality, manufacturing, delivery performance, customer relations and service. Highly customized and cost-effective solutions far exceed the current standards. KRAIBURG is the leading specialist for the development and manufacture of rubber and silicone compounds that fulfill the most stringent requirements.

Rezimac epoxy-modified alkyd resins produce a resin that is saponification resistant, as well as tolerant of strong solvents when recoated. Because of the epoxy component, they adhere well to various substrates. Ideal for use as general metal primers and primers for galvanized steel.

Whether you’re looking for paraffins, natural wax, or a custom blend, Calumet has the expertise and offerings to provide you with the right wax for your candle needs. Container candles, Wax melts, Pillars, Votives, Tapers, Tea Lights, Novelty Candles, Tarts.

Acetal-C is a high-quality general-purpose engineering plastic material; the chemical name is polyoxymethylene. It’s available in a range of grades and forms to suit many applications.