Products in Appliances & Electronics: Footwear

Arnitel® ECO L460 is a high-performance thermoplastic copolyester (TPC) celebrated for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. Across diverse industries like automotive and E&E, it stands as a lighter, more intelligent, and environmentally friendly substitute for conventional rubbers, effectively reducing environmental impact and system costs. This material is specifically tailored for injection molding processes and is remarkable for containing 40% renewable content. It is also suitable for food-contact applications.

VANQUISH™ 100 Antimicrobial is based on the active agent N-butyl-1,2-benzisothiazolin-3-one (BBIT) and is recommended for use in tough and demanding applications especially those exposed to high UV levels. It is a broad spectrum antimicrobial used to prevent fungal, bacterial, and algal spoilage of polymers such as PVC, polyurethane, silicone, polyolefin, polyester, and acrylic articles such as shower curtains, coated fabric, vinyl wall coverings, floor coverings, appliance gaskets, wall and floor coatings, and swimming pool, pond, and ditch liners.

Fluorescent dye for plastics

Fluorescent dye for plastics

Fluorescent UV-dye for plastics

Fluorescent dye for plastics

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Da/Pro Rubber SBR is an elastomeric copolymer that consists of styrene and butadiene. SBR has good abrasion resistance and good stability.

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

Resinoid Compound 1322 is a glass reinforced, two step molding compound. It may be preformed. Recommended for transfer, injection or compression molding

Polyester-Based TPU2 HF-1170AP by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Gardening shoes, Accessories, Fashion shoe sole and Heel life.

STARCOM S/3100 is a PVC grade product.

Vinoplast 510 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Hangzhou Hi-Tech Fine Chemical AC6000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

Nycast® 6PA MoS2 is used in metal applications for lubrication and has delivered successful performance throughout the years. The main advantages of NYCAST 6PA MoS2are:.

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

MARFRAN® B TS is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. Compounds for injection and extrusion molding: soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Kraton D1101 J is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Japan in the physical form(s) identified below. Kraton D1101 JU - supplied as undusted crumb Kraton D1101 JO - supplied as crumb dusted with organic dusting agent Kraton D1101 JSM - supplied as powder dusted with amorphous silica Kraton D1101 J is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Cross-linked polyethylene foam is used in Steel composite layers, construction tape, underground cables for the external protection, heating equipment, insulation, sealing tape, building insulator, seal tank, helmet, waterproof material, floor insulation materials, cushioning buffer materials.

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

Polyester-Based TPU HF-1090A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Polyester-Based TPU HF-1098A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

Orient Black® N660 is a low surface area, medium structure general purpose furnace grade which provides medium reinforcement and excellent workability.

Resinoid 1371 is a glass reinforced, two-step phenolic molding compound offering good mechanical and electrical properties. This product has been specifically formulated for applications requiring prolonged exposure to elevated temperatures andresistance to thermal shocks.This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

VinoPrene 700 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

PermaFelx® 75 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Polyester-Based TPU HF-1070AP by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

Polyester-Based TPU HF-1275AP by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

Polyester-Based TPU HF-1075AP by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

STARCOM S/1000 is a PVC grade product.

Polyester-Based TPU2 HF-1185A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Gardening shoes, Accessories, Fashion shoe sole and Heel life.

Vinoplast 555 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Resinoid 1360HR is a glass reinforced, two-step phenolic molding compound. It exhibits outstanding impact strength, electrical and thermal properties. It is particularly suitable for high temperature and strength applications. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Hangzhou Hi-Tech Fine Chemical AC4000 is specially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

Vinoplast 466 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.