Products in Other Building & Construction Applications: Resin

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

NYPOL® A3 G20 V10 PRTA010 NR302 MSP is a 6.6 black polyamide with 30% mixed load

Plastiverd Plastiverd Design is copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has been specially designed for thick wall applications. This grade presents a higher IV and outstanding mechanical properties.

CompaDur® 121 GK 20 (008) is a PBT, injection molding grade, 20% glass beads, heat stabilized, low warp, good surface.

NYPOL® A3 G10 N10 NTLA014 NR514 is a 6.6 polyamide with 10% extra lubricated fiberglass

Grupo Repol A1S25 G35 is 35% Glass Fiber Reinforced Nylon 66.

Grupo Repol B1S25 N is Fast Cycling, Nucleated Nylon 6.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Oxford Polymers PC 68 is an unfilled polycarbonate for injection molding and extrusion molding.

G-PAEK™ 1100P G is Ultra High performance thermoplastic polymer, unreinforced Polyether Ketone, semi crystalline, powder for extrusion compounding, standard flow, food contact compliant, color natural white.

RSH Polymere ABS 1008 is good flowability and good impact strength. Plastics are extremely versatile materials. This also applies to our regranulates and compounds. By adding various fillers, additives, modifiers and stabilizers, we can influence the properties in a targeted manner and offer our customers highly professional materials. In addition to our standard range, we also develop tailor-made, individual regranulates and compounds for our customers on request.

CompaDur® 121 GF 20 (004) is a PBT, injection molding grade, non-reinforced, high viscosity, easy release.

Armlen PP MF 30-1 is a 30% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in white, blue and black.

NYPOL® A3 G15 NTLA010 NR324 is a Natural 6.6 polyamide with 15% glass fiber

CompaDur® 121 GF 10 FR (011) is a PBT, injection molding grade, 10% glass fibers, heat-stabilized, flame retardant, good flow ability and strength.

MAYREX® MW11120GF is Acrylonitrile-Butadiene-Styrene (ABS) grade product.

G-PAEK™ 1120FEP is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline fine powder suitable for compression molding, milky white in color.

Oxy Vinyls 216S is suspension PVC resin designed for rigid applications.

Qpac® Pbc Poly(Butylene Carbonate) is a new polymer/binder with unique properties.

Armlen PP MD 10-1 is a 10% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in green color.

MAYREX® MW111 U is Acrylonitrile-Butadiene-Styrene (ABS) grade product.

RSH Polymere ABS 1008 B is good flowability, good impact strength and few spots on the surface. Plastics are extremely versatile materials. This also applies to our regranulates and compounds. By adding various fillers, additives, modifiers and stabilizers, we can influence the properties in a targeted manner and offer our customers highly professional materials. In addition to our standard range, we also develop tailor-made, individual regranulates and compounds for our customers on request.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

LOXIAMID PA6 HS1 IM3 03039 is an injection molding grade of Polyamide 6 resin with excellent impact resistance.

NYPOL® A3 G15 HS UV RH PRTA011 NR303 is a 6.6 black polyamide with 15% thermostable fiberglass with UV protection

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

Micropol E28-05 is a random ethylene-vinyl acetate copolymer. This grade has been designed for cast / blown film applications where a high degree of flexibility is required combined with the physical cohesive strength properties which render it also suitable for hot-melt adhesive applications. Available in granular or powder form.

Armlen PP-3FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

Grupo Repol B1S25 G50 is 50% Glass Reinforced Nylon 6.