Products in Building & Construction: Binder

Novotrade Invest AS HCR-125AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Razeen® LR 1170 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1170 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1170 is meets the relevant requirements of the FDA listing.

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Razeen® LR 1166 is a general purpose unmodified medium to low viscosity epoxy resin based on Bisphenol A. Razeen® LR 1166 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1166 is meets the relevant requirements of the FDA listing.

Tigerlac 5056 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5056 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Novotrade Invest AS HCR-105AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Tigerlac 5058 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5058 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Mikro Technik 8036 R contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

P3 Creosote-Petroleum Solution is created through the distillation of coal tar and petroleum feedstocks. Lone Star's distillation technology enables us to provide distillate oils that meet the standards of the American Wood Protection Association for P1, P2, and P3 creosote, as well as those that meet the specifications for carbon black feedstock. We can ship distillate oils via railcar, tank truck, or ISO container due to our equipment capabilities.

KURARAY POVAL™ 44-88 S2 by Kuraray is a fine powder polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. Aqueous solution of KURARAY POVAL™ 44-88 S2 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is used in postage stamps and labels. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

Novotrade Invest AS HCR-115A is a solid polymer with fractional composition up to 3 mm.It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It also has a good adhesive properties, tackifying characteristics and heat stability.

Araldite® GY 250 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A.

Mikro Technik 75a contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Petroleum Pitch is the primary material produced by distilling coal tar and petroleum feedstocks, and it is used as a binder and for impregnation applications in a variety of industries. Lone Star's distillation technology enables us to meet a wide range of customer requirements, and our extensive equipment capabilities allow us to ship liquid and solid pitch via railcar, tank truck, and specialty packaging.

Micro-sized Silica

Razeen® LR 1150 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1150 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1150 is meets the relevant requirements of the FDA listing.

Kamicryl 400 is a aqueous, plasticizer-free and anionic acrylic/styrene copolymer.

LESTAC DP100 is brown to dark brown color thermoplastic granular or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

KURARAY POVAL™ L-508W by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ L-508W is recommended for adhesive and suspending agent for PVC suspension polymerization.

KURARAY POVAL™ L-8 by Kuraray is a porous, specialty polyvinyl alcohol (PVA) grade. Exhibits excellent water solubility, strong film-forming properties and oil & grease resistance. Provides wetting properties on polar substances, good pigmentability, adhesiveness, low ash & VOC content and emulsifying property. KURARAY POVAL™ L-8 possible applications include adhesives, specialty papers, building materials and polymerization (emulsion/suspension). Meets SVHC.

Mikro Technik DT R contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Synthel PE-3015 is solvent-free moisture curing prepolymer based on aromatic polyisocyanate.

NexSil 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required.

KURARAY POVAL™ 23-88 EE by Kuraray is partially hydrolyzed polyvinyl alcohol (PVOH) grade. It exhibits good bonding strength and pigment binding capacity. It provides good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is used as an adhesive promoter. Aqueous solution of KURARAY POVAL™ 23-88 EE can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels.

OPTICRYL 2960 by OPTICHEM is a Acrylic Polymer Base. It has been Alkaline and Effloresence resistance Acrylic Binder.

Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with aromatic glycidyl ether.

Novotrade Invest AS HCR-155V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

Coal Tar Pitch Solid is the primary material produced by distilling coal tar and petroleum feedstocks, and it is used as a binder and for impregnation applications in a variety of industries. Lone Star's distillation technology enables us to meet a wide range of customer requirements, and our extensive equipment capabilities allow us to ship liquid and solid pitch via railcar, tank truck, and specialty packaging.

KURARAY POVAL™ 28-99 LA by Kuraray is a water-soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion and low ash (sodium acetate) content. It possesses good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 28-99 LA is recommended for adhesive for flooring webs, PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry and films applications.

Zeocem ZeoSlag is an admixture for concrete production. The product is made by very fine grinding of granulated blast furnace slag with the addition of natural zeolite (pozzolan).

Tigerlac 5061 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5061 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Razeen® LR 2350 is a general purpose modified epoxy resin based on Bisphenol A & Bisphenol F. Razeen® LR 2350 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 2350 meets the relevant requirements of the FDA listing.

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

KURARAY POVAL™ 4-88 LA by Kuraray is a water-soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion and low ash (sodium acetate) content. It shows good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 4-88 LA is recommended for adhesive for flooring webs, PSA labels and in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.

Coal Tar Pitch Liquid is the primary material produced by distilling coal tar and petroleum feedstocks, and it is used as a binder and for impregnation applications in a variety of industries. Lone Star's distillation technology enables us to meet a wide range of customer requirements, and our extensive equipment capabilities allow us to ship liquid and solid pitch via railcar, tank truck, and specialty packaging.

LESTAC P130 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.