Products in Building & Construction: Prepreg

EF 10 is highly toughened Mid Tg prepreg can be cured with autoclave and used in extreme applications in automotive industry and aviation industry.

PREPREG system BE (epoxy resin) are based on a temperature- resistant modified epoxy resin . Its processing is hot pressing or PREPREG winding. Its tack has no to little stickiness.

EF 12 is above 240 °C. High Tg EF12 resin system is used to produce structural prepregs. Optimized cure methods for these resin systems are Press and Autoclave molding.

IM Carbon Fiber UD200H60-T1000 GRADE is a E3 Matrix System with a precursor as PAN.

Taconic 7068 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

Park’s E-765 is a toughened 270°F cure epoxy prepreg system designed to replace 350°F cure systems in many aircraft structural applications. Park’s E-765-3K-PW, -6K-5HS and 7781 materials are AGATE approved. FAA-approved, B-Basis design allowable databases for AGATE materials are available upon request. Park has also developed AGATE approved material and process specifications which are also available upon request.

Taconic 7048 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

AtenPly GPP35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

IM Carbon Fiber UD125 H60-MR70 is a E3 Matrix System with a precursor as PAN.

HS Carbon Fiber UD150H60 is a E3 Matrix System with a precursor as PAN.

PolyWeb C is made from polypropylene or PET staple fiber and chopped fiberglass (natural or black).

PREPREG system SG (silicone resin) are based on a silicone resin. Its Processing is hot pressing or prepreg winding.

Evopreg® PFC502 prepregs are a range of fire-retardant, pre-impregnated composite materialsbased on a PFA (Polyfurfuryl Alcohol) bioresin. PFA is a thermosetting bioresin derived from crop waste and is similar to phenolic resin but withlower toxicity and VOC emissions. In addition to its environmental credentials, PFA hasoutstanding fire retardant properties, plus excellent temperature and chemical resistance. The prepregs can be supplied with a range of reinforcement fibers and fabric constructions,including woven and unidirectional E-glass fiber and carbon fiber. They can be consolidated byvacuum bagging, autoclave or press molding and are designed for applications includingaircraft interiors, rail interiors, marine, offshore and construction.

CM11 resin is Mid Tg and its prepregs are suitable for hot painting, hot gluing and cataphoresis processes. New resin system not only cures under 3 minutes at 150°C at press under isothermal curing conditions but also hot de-moldable and long out-life of two weeks at ambient temperature. These extreme conditions does not affect the visual Performance of prepreg system with CM11, capable of Class A Surface. Drapability is suitable for press molds and low to medium tack optimized for press curing.

PSR133 is a high performance phenolic resin available in neat resin and prepreg form. Prepregs manufactured with PSR 133 meet the stringent requirements of MIL-R-9299C, Grade B. PSR133 is the most cost effective phenolic available and offers excellent char yield for carbon/carbon applications and does not exhibit micro-cracking in high modulus composite structures.

ZOLTEK produces uni-directional (UD) prepreg tapes based on ZOLTEK carbon fiber. ZOLTEK prepreg is ideal for large-volume composite applications where high production throughput, excellent composite properties, and low material cost are important. A wide selection of epoxy resin formulations meet most processing and composite property requirements for tack, toughness, surface finish, cure time, cure temperature, and delivered composite strength and modulus. Custom formulations are also available. ZOLTEK prepreg properties, such as fiber areal weight (FAW), resin content, and width, are readily adjusted to exactly meet customer requirements. Packaging options include core size, customer specified knitting requirements, and custom labeling. ZOLTEK prepreg production is geared to large volumes and low cost. Special projects are welcomed.

Taconic 7038 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

THINPREG™ TP 736LT is an exceptionally versatile hot-melt, epoxy prepreg. It can be cured at temperature as low as 80°C (176°F), or can be used for faster molding of components at 120°C (248°F). This is achieved with a good out-life of up to 60 days at 18-22°C (64-72°C)..

IM Carbon Fiber UD110 H50-IMS65 GRADE is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD100H60-T1000 GRADE is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD200H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

Ecotechnilin L-FLAXPREG-T-UD-50-60m² is a unidirectional (UD) fibers - FLAXPREG T-UD 50.

Basaltex NV Basaltex BAS1101 is an impregnated basalt fabric designed as fire barrier in composites for public transport, aerospace, maritime, automotive as well as building and construction. Basalt fibers are extruded from 100% basalt volcanic rocks. They are characterized by outstanding mechanical properties combined with unique heat resistance. Basalt fibers are inert at high temperatures, will not soften like glass fibers, and retain their structure as barrier in a fire.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

7106 PTFE-Glass Fabric is a Economy Grade PTFE-Glass Fabric is designed for large volume applications that require cost-efficiency and high performance. Applications include leaders for processing paper, plastics, metallic foils and cloth, separator sheets for processing uncured rubber and manufacturing of abrasive wheels.

AtenPly GPA6-45 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

PREPREG Low temperature, system BX (epoxy resin) are based on modified epoxy resins with an extremely wide curing range from 55 ° C to 185 ° C and meet the requirements of a low-pressure / low-temperature PREPREG. The BX system is suitable for the production of structural components as well as fiber composite tools with a heat resistance of up to 195 ° C. The processing can take place according to all common methods.

HS Carbon Fiber UD250H60 is a E3 Matrix System with a precursor as PAN.

Taconic 7208 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

IM Carbon Fiber UD125 H60-MR60H is a E3 Matrix System with a precursor as PAN.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

Taconic 7058 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

AX-5201 is a Toughened Epoxy Carbon Laminating Prepreg.

IM Carbon Fiber UD100H60-MR70 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD200H60-MR70 is a E3 Matrix System with a precursor as PAN.

CM12 resin is Mid Tg, dicy-free fast cure, hot demoldable isothermal press curable resin system and it is suitable for sanding and metal composite hybrid part production. Drapability is suitable for press molds and low to medium tack optimized for press curing. Performance of prepreg system with CM12, capable of Class A Surface.