Products in Building & Construction: Epoxy & Epoxy Derivatives

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

ARCOR® Spraythane is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combating cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The combination of epoxy and urethane in ARCOR® Spraythane provides a durable and flexible resilience, along with improved water and chemical resistance. It also boasts excellent shelf stability. Unlike traditional urethanes, ARCOR® Spraythane's epoxy reactivity eliminates moisture sensitivity and toxicity concerns. This coating delivers a smooth finish and effortlessly self-levels in horizontal applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® Spraythane FL is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combatting cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The urethane aspect of ARCOR® Spraythane FL delivers a tough and flexible resilience, while the epoxy aspect provides improved water and chemical resistance, as well as shelf stability. Notably, the epoxy reactivity of this product eliminates the moisture sensitivity and toxicity commonly associated with traditional urethanes. ARCOR® Spraythane FL is a reliable and durable solution for a wide range of coating applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.

NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202

NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.

NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.

NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

ADEKA™ EP-4530, a distinguished epoxy resin and compound polymer under the umbrella of cutting-edge plastic technologies, is meticulously crafted for optimal performance in plastic processing methods, with a particular emphasis on casting. Boasting amorphous characteristics and high hardness, ADEKA™ EP-4530 stands out as a premier choice for flooring applications, promising not only quality but also versatility in meeting diverse industrial needs.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Grade RT130 meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130 has excellent machining characteristics. RT130 complies with IEC 61212-3-1 EP GC 23.

Grade RT130M meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130M has excellent machining characteristics. Certification to IEC standard is pending.

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

BECKOPOX™ EP 386W/52WA is an epoxy and epoxy derivative binder and resin from CASE Ingredients, featuring benzyl alcohol-free and VOC-free labeling. Designed with corrosion resistance, improved flexibility, and matte gloss capability, it caters to the automotive, construction, and coatings markets. Ideal applications include automotive OEM coatings, marine coatings, and industrial finishes on metal and plastic substrates.

BECKOPOX™ EP 2340W/56WA is a liquid binder and resin within the epoxy and epoxy derivatives family, provided by CASE Ingredients. Notably APEO-free, formaldehyde-free, solvent-free, and VOC-free, it showcases enhanced chemical resistance and hardness. Tailored for the building and construction and paints and coatings sectors, its applications span decorative paints, building envelopes and roofing, and EIFS and insulation. This product, compatible with epoxies, is available as both an epoxy and waterborne coating, eliminating the need for a primer due to its primerless feature.

ECP 526 'Extra' Conductive Water-based anti-slip epoxy. ECP 526 'Extra' is high-quality water borne two pack epoxy system. Environmentally friendly, it offers the advantages of low odor, and easy cleaning of equipment with water and anti-slip properties. Additionally, the coating has an advantage over conventional anti-slip coatings as it can be applied by virtually any method, including spraying. It is very esthetically appealing as it is made without the traditional additives used in anti-slip coatings such as grit and metal shards and provides a silky matte finish.