Products in Structural Components: Wear Resistant

NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.

Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.

CAPXIDAN® LG is a modified copolymer produced with a proprietary, patent pending formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deckboards to provide moisture, stain and wear resistance, esthetics, low gloss, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® LG is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

Tecomid® NA40 GR30 NL HS by Eurotec Engineering Plastics is comprised of Polyamide 66. It is commonly used

CAPXIDAN® HD is a Modified Copolymer produced with a proprietary, specialized formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deck boards to provide moisture, stain, wear resistance,esthetics, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® HD is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

Manifattura Cattaneo PEEK is a semi-crystalline thermoplastic is based on polyetheretherketone resin, is a technologically advanced material and exhibits a particular combination of remarkable mechanical properties, temperature resistance and excellent chemical resistance.

Delrin® Acetal Homopolymer Sheet is a strong, rigid plastic with a higher mechanical strength, hardness and creep resistance than Acetal copolymer. It also has a high resistance to wear, but is not resistant to long term immersion in water in temperatures over +60°C.

POM-CF10, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

Guarniflon G405/GLASS is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Techno Compound PBT2 FR Natural (9984) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating.Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

Nylene Low wear 43% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

Comco Powerglide is a modified polyamide type that is created especially for construction parts demanding enhanced gliding and durability properties to ensure long-term functionality. Compared to metal, this material has the advantage of reduced weight. Comco Powerglide displays superior tribological qualities compared to unfilled plastics. For customers seeking the gliding properties of PE 1000 coupled with the wear resistance and high mechanical rigidity of polyamide, Comco Powerglide is the optimal material. Applications include gliding and bearing elements, wear plates and rollers subject to high pressure in all fields of machine construction, crane construction and conveyor technology. Curve guides, cog wheels and sprocket wheels are further examples of possible uses. The standard color of Comco Powerglide is green, with further colors available on demand.

Outline: CZ-1030 is a pitch based carbon fiber reinforced PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black

Haysite Reinforced Plastics 24500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

POM copolymer unreinforced, low viscosity, laser-inscribable

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

Nycast® 6PA MoS2 is used in metal applications for lubrication and has delivered successful performance throughout the years. The main advantages of NYCAST 6PA MoS2are:.

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

Techno Compound PBT4 GK 30 Natural (9949) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

POM-HI, POM copolymer unreinforced, medium viscosity, impact modified

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

RGMS30 is a Nylon 66 Unfilled Lubricated with MoS2.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Resinoid 2016P is a fabric reinforced, two-step phenolic molding compound offering excellent resistance to mechanical shock. It is supplied in pellet form suitable for transfer and compression molding. This material can also be used in injection molding systems with deep flight screws

Essentium’s TPU 95A Low Friction is the medium durometer filament in our broad flexible portfolio. It balances high elongation with impressive impact resistance and tensile strength. This filament has a low friction surface that allows for easier feeding while printing.

Haysite Reinforced Plastics 42000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 44500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Outline: CZL-2000 is a pitch based carbon fiber and poly tetra fluoro ethylene filled PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.