Products in Structural Components: Construction Applications

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

LINCORE® PP FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PP filaments). Consolidation is done by heating above melting temperature of PP matrix (180°C-230°C) and applying a low pressure (1-30 bars), before a cooling step under pressure. The molding can be realized by : Diaphragm (1 to 8 bars), Thermo compression (10 to 200 bars), Sandwich thermo compression (1 to 5 bars).

ISO TECH Kunststoff GmbH ISO-POM is a semi-crystalline, thermoplastic plastic that is characterized by high strength and hardness as well as high abrasion resistance. In particular, slide rails and bearing bushings are often made from ISO-POM .

The properties are essentially comparable to those of LiNNOTAM. By using a stabilizer, the thermal-oxidative Counteracted material degradation when exposed to temperature. In comparison to pure cast polyamide, higher usage temperatures can be achieved realize.

LINCORE® PLA FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PLA filaments). Consolidation is done by heating above melting temperature of PLA matric (170°C-200°C) and applying a low pressure (1-30 bars), before a cooling step under pressure.The molding can be realized by diaphragm (1 to 8 bars)- Thermo compression (10 to 200 bars) - Sandwich thermo compression (1 to 5 bars).

MAGNAPBT® L60 007 NC00 1000 is a PBT %30 glass fiber natural heat aging for injection application.

SPINOPC® T30 200 NC00 is a PC UNFILLED NATURAL for injection applications.

TPE Solutions TPV 160A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

MAGNAPBT® L60 002 NC00 1000 is a PBT %15 glass fiber natural heat aging for injection applications.

LINCORE® CP PLA 30 is a compound reinforced with 30% by mass of flax fibers.

Badamid® B70 TM-Z3 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

The TPS ClearGuard® Hurricane Panels are made with super tough Polycarbonate resin (a type of plastic) that will not rust, shatter, or corrode. Our TPS ClearGuard® Hurricane Panels allow natural light to filter in during storm related power outages. With up to 85% natural light transmission, every homeowner should be sure to have a clear panel system that allows light in and visibility out. Unlike unsightly metal panels ClearGuard® Hurricane Panels, are virtually invisible when installed. The lightweight TPS ClearGuard® Hurricane Panels provide a safe and easy system with no sharp edges. The narrow widths promote easier homeowner handling and installation. Easy to install. .. Easy to store ... making them perfect for compact stacking. Fits perfectly with standard industry Tracks and Hardware.

TPE Solutions TPV 140A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 140A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Micro-FL-1014 5B is an economical masterbatch based on Talc with LDPE carrier which contributes to extrusion process stability and improved output. It improves MD tear resistance and dart impact properties , retains light transmission levels and improves MD/TD shrinkage levels.

Polimersan Plastics Polikes (PA 6 G) is tough and high mechanical strength and produced by casting.

SPINOPC® T43 001 GR08 2060 is a PC Unfilled Gray (RAL 7035) Flame Retardant for injection applications.

RIALENE P 100 SGF10plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

SPINOPC® P16-061 is a PC %20 GLASS FIBER BLACK for injection applications.

PCW PP Flame retardants have naturally responded to the more stringent demands in the electrical and construction industry. PCW therefore offers a wide portfolio of especially flame-resistant PP types. We thereby cover a wide range of requirements and standards, such as UL 94 V0-V2 or the VDE 0207 glowing wire test. Our recipes contain halogenated as well as halogen-free flame retardants. They are also PBDE-free and thus meet RoHS guidelines. And it is for maximum flame and fire protection.

RUGOPPA® P60 007 NC00 is a PPA %30 glass fiber natural (Heat Stb.) for injection application.

Badamid® A70 CF20 HHC by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

SPINOPC® T63 001 BK55 1000 is a PC UNFILLED NATURAL FLAME RETARDANT

Elastoprene S1070A is a styrenic elastomer intended for injection molding and extrusion applications, offering good tensile strength, rubbery look and feel, and easy processing.

multithene 1050 is High-density polyethylene compound.

MAGNAPBT® L30 200 NC00 is a PBT unfilled natural.

RIALENE P 100 SGF35plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

PPA 30D is a polymer processing aid with PE Resin.

RUGOPA® M60 016 NC00 1000 is a PA6 50% glass fiber natural (Heat stb.+UV Protection) for injection applications.

Badamid® A70 TM-Z3 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

LINCORE® CP PP 20 is a compound reinforced with 30% by mass of flax fibers.

RUGOPPA® P60 027 NC00 is a PPA %45 glass fiber natural (Heat Stb.) for injection application.

TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Badamid® A70 GK30 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

RUGOPPA® P17-105 is a PPA/PA %35 glass fiber white (Heat aging) for injection applications.

Sylvin™ 83015-80FUV Brown 7463 is a vinyl compound formulated for extruded pool bead applications. This compound contains an antimicrobial and an ultra violet stabilizer.

Badamid® B70 SM-Z2 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.