Products in Building Materials: Wear Resistant

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Tecomid® NA40 GR30 NL HS by Eurotec Engineering Plastics is comprised of Polyamide 66. It is commonly used

CAPXIDAN® HD is a Modified Copolymer produced with a proprietary, specialized formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deck boards to provide moisture, stain, wear resistance,esthetics, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® HD is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

GERMAFORM 9 GK 30 is a polyoxymethylene (POM) copolymer material, which contains 30% glass beads. This product is available in Europe.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

Manifattura Cattaneo PEEK is a semi-crystalline thermoplastic is based on polyetheretherketone resin, is a technologically advanced material and exhibits a particular combination of remarkable mechanical properties, temperature resistance and excellent chemical resistance.

Delrin® Acetal Homopolymer Sheet is a strong, rigid plastic with a higher mechanical strength, hardness and creep resistance than Acetal copolymer. It also has a high resistance to wear, but is not resistant to long term immersion in water in temperatures over +60°C.

POM-CF10, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

Guarniflon G405/GLASS is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Techno Compound PBT2 FR Natural (9984) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

G-PAEK™ 1100ESG is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for stock shapes extrusion, easy flow, Beige in color.

GERMAFORM 9 is a polyoxymethylene (POM) copolymer material. This product is available in Europe.

Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating.Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

Titacon® TF920 is a 20％PTFE POWDER FILLED, WEAR RESISTANCE.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

Polyslick® Rocket Plate is a 100% virgin UHMW-PE (Ultra High Molecular Weight Polyethylene) sheet product with hemispherical nodules on one side designed to reduce surface contact facilitating easier movement and rotation of heavy material in any direction. Low friction, lightweight, impact resistant, and cost effective are just some of Rocket Plate's features along with being easy to install and requiring virtually no maintenance.

Nylene Low wear 43% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

G-PAEK™ 1200G is Ultra high Performance thermoplastic polymer, virgin, semicrytalline granules suitable for injection molding, easy flow, Beige in color.

Grupa Azoty S.A Tarflen® SM2 is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compression molding.Important attributes of Tarflen® SM2 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

AFT Fluorotec AF1302 HN900-B85-RGD is a black hydrogenated acrylonitrile-butadiene-rubber commonly referred to as H- NBR. Good physical characteristics and chemical resistance to the most common hydraulic fluids, high addivated oils, sour oils/gasses (H2S) and crude oils. HN900-B85-RGD has been optimized to withstand the risk of rapid gas decompression (RGD) or explosive decompression (ED) which is an essential demand in the oil and gas industry.

Comco Powerglide is a modified polyamide type that is created especially for construction parts demanding enhanced gliding and durability properties to ensure long-term functionality. Compared to metal, this material has the advantage of reduced weight. Comco Powerglide displays superior tribological qualities compared to unfilled plastics. For customers seeking the gliding properties of PE 1000 coupled with the wear resistance and high mechanical rigidity of polyamide, Comco Powerglide is the optimal material. Applications include gliding and bearing elements, wear plates and rollers subject to high pressure in all fields of machine construction, crane construction and conveyor technology. Curve guides, cog wheels and sprocket wheels are further examples of possible uses. The standard color of Comco Powerglide is green, with further colors available on demand.

Outline: CZ-1030 is a pitch based carbon fiber reinforced PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black

Haysite Reinforced Plastics 24500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Grupa Azoty S.A Tarflen® SM-B40 is a Polytetrafluoroethylene (PTFE) material filled with 40% bronze. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® SM-B40 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

Nanjing Shuguang Chemical Group Silane coupling agent Rsi-S is blend of KH-845-4 and silica, it has the same function with KH-845-4, but it’s white solid and more convenient for processing, especially for light color system.

Twaron® short-cut fiber can raise the performance of a wide range of products, including rubber compounds and engineered plastics.

Grupa Azoty S.A Tarflen® SM-B30 is a Polytetrafluoroethylene (PTFE) material filled with 30% bronze. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® SM-B30 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

POM copolymer unreinforced, low viscosity, laser-inscribable

GERMAFORM 9 PTFE 15 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main characteristics of GERMAFORM 9 PTFE 15 are: lubrication.

Titacon® ST915 is a INJECTION MOLDING GRADE, PERMANENT ANTI-STATIC, NON-SLOUGHING, WEAR RESISTANCE, IMPACT MODIFIED, COLORABLE.

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

Acetal POM H TF is a partially crystalline modified thermoplastic.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact