Products in Building Materials: Tackifier

Acronal® A 107 serves as a tackifying admixture in the production of dispersion-based construction adhesives and expandable joint sealing tapes. It's an aqueous dispersion containing a polyacrylic acid butyl ester with low cohesion. This dispersion is neutralized with ammonia and is manufactured without the use of APEO, or formaldehyde. It exists in liquid form, presenting a white color, and is almost odorless.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

Kolon Industries HIKOREZ® A-2115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

Polybut EM MM 10(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 600(A-50) is a water-based emulsion of low molecular weight polybutene.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Kolon Industries HIKOREZ® H-2300 is a pale yellow thermoplastic resin obtained from C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha, and offers better color, thermal stability and lower odor than the previous C5 hydrocarbon resins. This product has excellent compatibility with Ethylene-Vinyl-Acetate (EVA) and Styrene-Butadiene-Styrene copolymer (SBS), and is used as tackifier resin. .

Polybut EM MM 15(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

SureTac 1325 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Kolon Industries SUKOREZ® SU-120 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Polybut™ X7 is a low molecular weight conventional polybutene.

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Polybut 1800 is a low molecular Weight Conventional Polybutene

Polybut™ 4 is a low molecular weight conventional polybutene.

Pine Rosins PR 388.2 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

Polybut™ 0 is a low molecular weight conventional polybutene.

Polybut EM MM 15 (A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L120 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Polybut EM 30 (A-50) is a water-based emulsion of low molecular weight polybutene.

SureTac 1370 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SYLVARES TP 2019 terpene phenol is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.