Products in Building Envelope & Roofing: Sealer

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Vertal® 7 is a highly lamellar talc/carbonate mineral pigment. Vertal® 7 provides a unique balance of prime pigment spacing (opacity), film reinforcement, and anti-cracking and barrier properties to architectural and decorative coatings. Vertal® 7 is especially suited for waterborne paints, universal primers, stain-blocking primers, sealers, and undercoaters. Vertal® 7 is also a good choice for low-VOC alkyd primers.

AquaMatte® 31Fine is micronized oxidized high density polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Tough, high molecular weight polymer imparts burnish and abrasion resistance. High density polymer provides maximum in-can stability with minimal flotation in water based systems. Ideal for water based systems. In seed coatings, improves anti-blocking, flow, and abrasion resistance.

Propyltex® 270HD are Medium to fine particle size grades of densified micronized polypropylene for adding consistent surface texture and structure with excellent in-can stability in water-based paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Particle density optimized to essentially eliminate flotation or settling in water based systems Adds a mild to medium texture to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces For a finer texture, try PropylMatte 31HD

PropylTex 230S-3034 are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Propyltex® 270S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

AquaTex® 325 are Fine particle size grades of oxidized polyethylene for reducing gloss and adding surface texture.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Adds a mild texture to the surface. Oxidized polyethylene provides lubricity and mar resistance. High density polymer provides maximum in-can stability with minimal flotation. Ideal for water based systems.

Polyfluo® 900A unique ceramic fortified composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance, surface durability and anti-blocking.Features and Benefits High performance product for maximizing surface abrasion resistance (Taber) and film toughness Fortified with hard, inert, semi-transparent spherical ceramic for maximum abrasion resistance Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE enhances abrasion resistance, antiblocking and film hardness Easy to disperse fine powder that can be incorporated with high speed mixing

AquaMatte® 22 is Ultrafine grade of micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings.Features and Benefits Provides uniform gloss reduction with good clarity and a smoother surface feel when compared to silica additives. Tough, high molecular weight polymer imparts burnish and abrasion resistance. High density polymer provides maximum in-can stability with minimal flotation in water based systems. Ideal for water based systems. In seed coatings, improves anti-blocking, flow, and abrasion resistance.

AquaBead® 425E has larger particle size anionic carnauba wax emulsion that provides water beading with weather resistance, slip, block and mar resistance.Features and Benefits Provides excellent initial and long term water beading Imparts weather and moisture resistance Can improve moisture vapor transmission rate (MVTR) Reduces water absorption in water based sound deadening systems (< 1.0% dosage) Prevents cracking in thick layer sound deadening systems and plasters (1.0 - 5.0% dosage)

Polyfluo® 190S is a unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability.Features and Benefits High performance product for improving surface abrasion resistance and film toughness Synergistic wax combination that enhances PTFE mobility to the coating surface Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE dramatically enhances abrasion resistance, antiblocking and film hardness Conforms to (EU) 2017/1000

Propyltex® 14 are Extra coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent coarse textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing

Propyltex® 20 are Extra coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent coarse textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing

Propyltex® 140S are Coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent medium textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Propyltex® 230S are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Propyltex® 30 are Extra coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent coarse textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing

Propyltex® 200S are Coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent medium textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Propyltex® 200SF are Coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent medium textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Propyltex® 270-18523HD is Fine particle size grade of densified micronized polypropylene for adding consistent surface texture and structure with excellent in-can stability in water-based paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Particle density optimized to essentially eliminate flotation or settling in water based systems Adds a mild texture to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces

Propyltex® 325HD are Medium to fine particle size grades of densified micronized polypropylene for adding consistent surface texture and structure with excellent in-can stability in water-based paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Particle density optimized to essentially eliminate flotation or settling in water based systems Adds a mild to medium texture to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces For a finer texture, try PropylMatte 31HD

MicroTouch 850XF is Highly resilient modified spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance.Features and Benefits Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed. Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings. Modified to enhance surface slip and lubricity. Improves burnish and abrasion resistance. Effective gloss reduction

Propyltex® 140S-4550 are Coarse particle size grade of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent medium textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Propyltex® 230HD areMedium to fine particle size grades of densified micronized polypropylene for adding consistent surface texture and structure with excellent in-can stability in water-based paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Particle density optimized to essentially eliminate flotation or settling in water based systems Adds a mild to medium texture to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces For a finer texture, try PropylMatte 31HD

Propyltex® 270S-1518 is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Propyltex® 100S are Coarse particle size grades of micronized polypropylene for adding texture, structure and non-slip properties to a wide variety of paints and coatings.Features and Benefits Provides a consistent medium textured coating surface Tough, high molecular weight polypropylene gives good film durability Does not lower COF; ideal for non-skid surfaces Easy to disperse powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

AquaTex® 270 are Fine particle size grades of oxidized polyethylene for reducing gloss and adding surface texture.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Adds a mild texture to the surface. Oxidized polyethylene provides lubricity and mar resistance. High density polymer provides maximum in-can stability with minimal flotation. Ideal for water based systems.

MicroTouch 800XXF is Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance.Features and Benefits Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed. Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings Different particle sizes available to create a unique surface "touch" Improves burnish and abrasion resistance Effective gloss reduction

MicroMatte® 1011 UVW is An economical modified polypropylene wax densified with inorganic pigment for consistent gloss control and stability in water-based and UV/EB coatings.Features and Benefits Effective gloss control with good in-can stability. Adds slip with scratch and mar resistance. Nonabrasive wax technology imparts a smoother surface feel vs. silica-based additives. Provides burnish and blocking resistance.

Synfluo 172VF is a combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

Polyfluo® 190A is unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability.Features and Benefits High performance product for improving surface abrasion resistance and film toughness Synergistic wax combination that enhances PTFE mobility to the coating surface Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE dramatically enhances abrasion resistance, antiblocking and film hardness Conforms to (EU) 2017/1000

AquaKlean 403 is an anionic paraffin/polyethylene wax emulsion ideal for cleanability and water repellency in architectural coatings.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts soil release for improved cleanability. Imparts slip, antiblocking, scratch and abrasion resistance. Wax emulsion particle does not reduce gloss or clarity. Anionic emulsion stabilization contributes to immediate hydrophobicity.

MicroTouch 800XF is Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance.Features and Benefits Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed. Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings Different particle sizes available to create a unique surface "touch" Improves burnish and abrasion resistance Effective gloss reduction

AquaBead® 525E-AM is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts weather and moisture resistance. Gives surface slip and antiblocking properties. Wax emulsion particle does not reduce gloss or clarity.

AquaTex® 200 are Medium particle size grades of oxidized polyethylene for adding texture to paints and coatings.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Adds a medium texture to the surface. Oxidized polyethylene provides lubricity and mar resistance. High density polymer provides maximum in-can stability with minimal flotation. Ideal for water based systems.

Propyltex® 325S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grade available for maximum texture control For a finer texture, try PropylMatte 31