Products in Transportation: Tanks

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Polyester Resin 199 is an isophthalic polyester resin recommended for use in high-performance applications where superior thermal and electrical properties are required. It has excellent chemical and heat resistance. This product can withstand long periods (1 year) at temperatures up to 150ºC, and shorter periods at temperatures up to 200ºC, with no serious loss of properties. It has a 30-minute gel time.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.

Crystic® Transfer Moulding Resin 785PA is apre-accelerated, DCPD based, polyester resin designed for use in RTM (Resin Transfer Molding). It has a lower styrene content than conventional RTM resins and can significantly reduce the occurrence of print through, to produce moldings with an enhanced surface finish.

Crystic® Polyester Resin 124PA is a medium-thixotropic, tropicalized, pre-accelerated, waxed unsaturated polyester resin. It is designed for rapid wetting and impregnation of reinforcements, making it ideal for building boats, water tanks, bath tubs, shower trays, and other products that require water resistance. The unwaxed version of this resin is also available.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

CoreLite PVC F 60 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion. Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. CoreLite PET can handle processing temperatures up to 150 °C (302 °F) . During high temperature processing it is thermally stable and no outgassing or expansion after postcure occurs. In the event of fire, no toxic gasses are generated.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

Cuyahoga Plastics EB7000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

CoreLite PVC F 100 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.