Products in Automotive & Transportation: Gears

Pentamid B GV35 H black is a normal viscosity, heat stabilized polyamide 6, 35% glass fiber reinforced.

Polyamide 6 general purpose

Titacon® TR720 is a 15 T ALC FILLED H IGH STIFFNESS L OW WARPAGE D IMENSIONAL ACCURACY M EDIUM FLOW

Polyoximethylene (POM) based compound. Glass beads. Medium viscosity. High dimensional stability.

Polyoximethylene (POM). Unfilled. Medium viscosity. Very good tribological properties.

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties

Pentamid B GV30 H UV natural is a normal viscosity, heat and uv stabilized polyamide 6, 30% glass fiber reinforced.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

Pentamid A GV35 H natural is a normal viscosity, heat stabilized polyamide 66, 35% glass fiber reinforced.

Titacon® GB920 is a 20 G LASS B EADS FILLED L OWER WARPAGE

Pentamid A GV30 H1 RC black is a normal viscosity, high heat stabilized polyamide 66, 30% glass fiber reinforced, recompound.

Pentamid A GV25 H RC black is a normal viscosity, heat stabilized polyamide 66, 25% glass fiber reinforced, recompound.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Polyester-Based TPU HF-1280AX by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

PA 6 reinforced with glass fiber

Pentamid A GV30 H RC black is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, recompound.

Glass Fiber Reinforced Engineering Grade Nylon (PA66)

Pentamid A GV15 MK15 H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber and 15% mineral filled.

Plain bearing material based on PPS, PPS + carbon fiber + graphite

PA 6 reinforced with glass fiber and glass beads

Polyester-Based TPU HF-1060D by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

POM copolymer unreinforced, medium viscosity, electrically conductive

Sollamid B 2740 FV 15 features low viscosity Polyamide 6, reinforced with fiberglass and UV protected, intended for injection molding. Sollamid B 2740 FV features formulas with fiber percentages ranging from 10 to 50% in natural, black and custom colors.

Pentamid B S GV60 H black is a low viscosity, heat stabilized polyamide 6, 60% glass fiber reinforced.

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Manifattura Cattaneo PP-s has high electrical and chemical characteristics. It has good rigidity and solidity. It is normally used with temperatures between + 5 ° c and + 90 ° c. It has a high resistance to chemical agents; you can weld it.

Polyester-Based TPU HF-1085A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Safty shoe sole, Accessories, Over-molding, Compounding, Footwear, Cell-phone cover: Castor, Protective gear and Automotive Applications.

Titacon® GB925 is a 25％GLASS BEADS FILLED, DIMENSIONAL ACCURACY, LOWER WARPAGE.

PA 66 reinforced with mineral filler, heat stabilized

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Pentamid B S GV50 H natural is a low viscosity, heat stabilized polyamide 6, 50% glass fiber reinforced.

Pentamid B GV15 H RC black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced, recompound.

Pentamid A GV25 H UV natural is a normal viscosity, high heat stabilized polyamide 66, 25% glass fiber reinforced.