Products in Automotive & Transportation: Polyphenylene Sulfide (PPS)

PPS-GF40, cross-linked PPS, 40% glass fiber reinforced, hydrolysis stabilized

PPS-SGM601E65 PPS is a 60% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide high modulus, low warp, excellent mechanical and electrical performance.

BARLOG plastics GmbH Kebablend® / MW FE 161001 PPS is a development product based on PPS for the production of soft magnetic components. The achievable permeability is approx. 10 (at 1MHz).

PPS-SG405E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

FORMPOLY® PPSGF40 offers a range of Engineering Plastic grades from unfilled, glass fiber reinforced for most demanding conditions reinforced to mineral and extreme requirements including FORMPOLY PPSGF40, which is Glass Fiber Reinforced PPS with high modulus.

Toray Torelina® A305MD1 is a Polyphenylene Sulfide (PPS) product filled with 50% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, high flow and high strength.

KEBATRON C 1065X1 is a cross-linked and reinforced design with 65% fiberglass or mineral filler.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Toray Torelina® A400MX01 is a Polyphenylene Sulfide (PPS) product filled with 60% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and high flow.

TU100 is a polyphenylene sulfide (PPS) fiber-reinforced uni-directional tape that processes in the 600-650oF (315-345oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PPS is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties. Quality Certifications - Barrday Composite Solutions is AS9100 and ISO9001 certified.

KEBATRON L 1040G3 is a linear PPS and reinforced design with 40% glass fiber fillings.

Outline: FZ-1130-D5 is a glass fiber 30% reinforced polyphenylene sulfide compound with reduced flash and improved flexibility compared to conventional grades. Color: Black and Natural (Brown).

PPS-GF40, linear PPS, 40% glass fiber reinforced

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

linear PPS, 30% glass fiber reinforced, impact resistant

PPS-CF, PPS carbon fiber reinforced

PPS-SGM505E43 PPS is a 50% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties.

INFINO XP-2165MC by LOTTE Advanced Materials is comprised of Polyphenylene Sulfide. It is commonly used

Polyplastics Group Durafide® 3130A1 is a Polyphenylene Sulfide (PPS) product filled with 30% mineral. It is available in Asia Pacific or North America.Characteristics include: Flame Rated Wear Resistant

PPS-SGM655E43 PPS is a 65% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide high modulus, low warp, good mechanical and electrical performance and low cost.

Outline: FZ-2140-B2 is a 40% glass fiber reinforced linear polyphenylene sulfide compound with excellent engineering properties and high flowability. Color: Black and Natural

Outline: FZ-6600-B2 is a glass fiber and mineral filled polyphenylene sulfide compound that is well balanced with excellent engineering properties and high flowability. Color: Black and Natural (off white)

Outline: FZ-3600-R5 is a GF/Mineral filled PPS compound which provides excellent hydrolytic stability for use of applications exposed to hot water or engine coolant. Color: Black

BARLOG plastics GmbH Kebablend® / WR 07/1130/2115 is a tribologically modified special compound based on PPS that combines high strength with good sliding behavior and high wear resistance, even at elevated temperatures.

Outline: FZ-6600-R1 is a GF/Mineral filled PPS compound which provides excellent strength, especially high weld strength and toughness. Color: Black and Natural

PPS-SGM555E43 PPS is a 55% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide low cost and good engineering properties.

Out line: CZL-4033 is a PAN based carbon fiber and poly tetra fluoro ethylene filled PPS compound that has excellent mechanical property, wear resistance, low friction and electric conductivity. Color: Natural (Black)

PPS-SGM501T65 PPS is a 50% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide good engineering properties

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

KEBABLEND / TC FE 190106 PPS is a special compound based on PPS, which is thermally conductive and not electrically insulating.

Outline: Z-200-E5 is an un-filled super tough PPS compound with excellent flexibility and toughness compared to FZ-2100. Color: Gray

Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Outline: FZ-3600-D5 is a glass fiber and mineral filled polyphenylene sulfide compound that provides enhanced strength and moldability compared to general purpose grade FZ-3600 Color: Black and Natural (Brown)

PPS-GF / MD 65, cross-linked PPS, 65% glass fiber / mineral hybrid reinforced

Farsoon Technologies FS 8100PPS provides excellent resistance to thermal deformation properties. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

PPS-SG501R65 PPS is a 50% advanced glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance