Products in Marine Coatings

Afcona - 5044 is an anionic/cationic wetting and dispersing additive designed to enhance the wetting of pigment surfaces and organically treated Bentonites.

Cardolite® NT-1515X70 is a xylene solution of a high-viscosity polyamide, designed for use with solid or liquid epoxy resins. Its epoxy resin systems are used in maintenance coatings and primers because of their excellent corrosion resistance and adhesion properties. This product is also useful in adhesive applications.

Cardolite® Lite 2002 is a light-colored, very low viscosity 100% solids curing agent.

Cardolite® NC - 558 is a low viscosity, solvent, and benzyl alcohol-free phenalkamine curing agent designed for epoxy coating applications protecting metal and concrete substrates. It offers rapid cure properties, excellent chemical resistance, adhesion on wet or unprepared surfaces, and outstanding water resistance and corrosion protection. It is suitable for heavy-duty industrial, marine, protective, floor, and potable water contact coatings.

Afcona - 5209 is an anionic/cationic wetting and dispersing additive aimed at improving the wetting of pigment surfaces.

Afcona - 5054 is a wetting and dispersing additive formulated to prevent sedimentation and flooding of pigments.

Pangel® OM4 is a rheological additive designed for intermediate to low polarity systems, formulated with highly purified bentonite clay. It's suitable for use with aliphatic solvents as well as mineral or synthetic oils. This standard organo-bentonite requires pregel preparation using a polar activator, making it ideal for low to medium-polarity solvent-based systems.

Cardolite® Lite 2100 is a low color and low viscosity cashew nutshell liquid modified hydrocarbon resin recommended as an epoxy modifier for use in adhesives, coatings, and tar replacement. It enables high solids and solvent-free formulations, improves system compatibility for better film formation and protective performance, and provides excellent water, moisture, and corrosion resistance.

Cardolite® NX - 8101 is an epoxy curing agent based on modified CNSL waterborne technology, recommended for epoxy primers and self-levelers for concrete floors.

Cardolite® Ultra LITE 513 is a very light-colored, low-viscosity, monofunctional epoxy reactive diluent designed for coatings, adhesives, and other epoxy applications. The long hydrophobic aliphatic side chain of cardanol gives this product a very low viscosity and provides excellent water resistance, flexibility, and thermal shock resistance. High-viscosity solvent or solvent-free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product.

Cardolite® NT-1515 is a high-viscosity polyamide, free from solvents, specifically crafted for use with solid or liquid epoxy resins. Its epoxy systems excel in maintenance coatings, primers, and enamel paint formulations due to their remarkable corrosion resistance and adhesion properties. Additionally, this product proves beneficial in various adhesive applications.

Cardolite® NX - 2021 is a low viscosity multipurpose resin modifier and accelerator designed for coatings, adhesives, and other applications. Its long hydrophobic aliphatic side chain provides excellent early water resistance and corrosion protection. It enhances workability, increases solids content, and accelerates cure without sacrificing performance properties.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

ECONYL® BLUE BL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® WHITE WX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BIVA YELLOW YX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW OXIDE YX3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB RED OXIDE 03 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Borchi® Gen 1451 is a high molecular weight APEO-free dispersant for organic pigments and carbon black in solvent-based automotive, industrial, decorative, and protective and marine coatings.

ECONYL® GREEN GR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Dispersing Agent for Carbon Black Pigments and Difficult to Disperse Organic PigmentsBorchi® Gen 0451 is a high molecular weight non-ionic and VOC-free dispersing agent for carbon black pigments . This dispersant provides better jetness in carbon black pigment dispersions and also improves color development in difficult to disperse organic pigments in both water- and solvent-based systems. It provides shorter grind times, higher gloss performance, high jetness, low viscosity dispersions, and long-term viscosity.

ECONYL® BLACK OXIDE, BKX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 12 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLUE BL4 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB VIOLET 10 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB ORANGE 06 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED RLF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB YELLOW OXIDE 02 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW YHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® MAGENTA MG1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.