Products in Seating

ARPRO® 3437ORFR is a fire retardant expanded polypropylene.

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Envir® PA66G33HL-BK0101 is a 33% Glass fiber reinforced Nylon 66 molding resin, it is Heat stabilized and hydrolysis resistant. 66G33HL is optimized for properties and processibility. It is provided Black in color.

EcoFlame APP204 (Ammonium Polyphosphate) fits for all the conditions where APP201 is applicable. In particular, it is especially suitable for thermoplastics and solvent radical intumescent coatings. This phosphorous based smoke suppressant exhibits excellent electrical insulation property, and it can be added into a base material in order to meet the UL 94 VO flame retardant requirements.

Avery Dennison™ FBR 8950 is a 4.0 mil double coated polyester with a general purpose rubber adhesive. It bonds well to polyurethane foams, fabrics and low surface energy materials. It is commonly used for foam bonding and general purpose attachment in automotive and appliance applications.

ELASTIL™ combines excellent material performances of thermoplastic elastomer with our know-how of bead foam. In addition, we have well-experienced foaming and molding technologies, product design skills and customization technology therefore we can propose finished products (moldings) as our solutions.

60 MG Medical Grade PVC Foam Tape is a closed cell, low density PVC foam. It is bio - compatible and has been independently tested and certified to comply with the ISO 10993 - 10 protocol for direct skin contact.

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

Flexible Pour Foam F7204 is a high-performance, medium density flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment or hand-mix. Once fully cured, Flexible Pour Foam F7204 is tough and flexible.

FiberVisons® NForz is a new fiber developed for needlepunched application. It has a high performance. The fiber’s strength level, spin finish type and content will be adjusted to each specific application. It also guarantees the customer a close cooperation with all parts of the FiberVisions competence functions. In addition, the fiber is supported by strong R&D experience.

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.

Farsoon Technologies FS 1088A - TPU provides superb elongation and low processing temperature.Ideal for applications requiring a soft or flexible material applications. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

Go Yen Chemical Industrial Company GY-FR-P39 is a non-halogenated flame retardant that can be used in PVC insulation materials, PVC cables, PU based wood products, PVC tapes, PU foaming, etc. It can also be used as a flame retardant plasticizer.

ARPRO® 3429REFR is a fire retardant expanded polypropylene.

Go Yen Chemical Industrial Company GY-FR-OP10 GYC is non-halogen, no metal, environmental- friendly flame retardant which provides permanent flame retardant ability to end-product. It’s appointed product for renowned manufactures. GY-FR-OP10 is well compatible with various paint, plastic, resins, elastomer and adhesive.

ARPRO® 3430YEFR is a fire retardant expanded polypropylene.

ARPRO® 3437SI is a expanded polypropylene.

ARPRO® 3429GR is a expanded polypropylene.

Sacoflam 47201 is a gas-phase active radical inhibitors.

Kocetal UR304 is impact strength modified grade suitable for fasteners and switches.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

Roflam F9 is a specialized phosphate ester used as an additive flame retardant. The product is halogen-free, thus, it does not release toxic gasses during the combustion process. The use of a flame retardant leads to the formation of a charred layer on the surface of the material, which inhibits the spread of the flame. In order to enhance the flame retarding effect, Roflam F9 can be used together with inorganic flame retardants in the powder form with which it has a synergistic effect.

Auburn Manufacturing Co. PDF BF-1000 Extra Soft Silicone Foam's compressibility, softness and durability allow them to adapt to a variety of environments, making it an ideal choice for sealing outdoor enclosures, protecting electronics from shock and heat, and providing cushioning or vibration isolation for various applications. BF-1000 is available in various thicknesses and is manufactured in roll or sheet forms. BF-1000 can be further die cut into gaskets, seals, cushions and pads to the proper dimensions, and slit to rolls of specific width and laminated on one or two of its surfaces with silicone or acrylic PSA.

Flexible Pour Foam F7045 is a water-blown, High resilient flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment. Flexible Pour Foam F7045 has excellent green strength and when fully cured provides excellent memory and tear resistance.

Flexible Pour Foam F7209 Gray is a high-performance, medium density flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment or hand-mix. Once fully cured, Flexible Pour Foam F7209 Gray is tough and flexible.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

Envir® PA66G25HL-BK0101 is a 25% Glass fiber reinforced Nylon 66 molding resin, it is Heat stabilized and hydrolysis resistant. 66G25HL is optimized for strength and processibility while offering low volatiles in extrusion applications. It is provided Black in color.

Flexible Pour Foam F7203 is a high-performance, flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment. Once fully cured, Flexible Pour Foam F7203 is tough, flexible and dimensionally stable.

Miracll Chemicals E 85 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Addiflam® PP50 can be applied by padding, various coating systems (instable, crushed stable foam, paste, kiss roll, lamination) either supplied as a ready-to-use compound or as an additive (powder, dispersions, emulsions, slurries) for self-compounding purposes. Cost effective tailor made solutions are available upon end use, manufacturing options and level of durability required.

ARPRO® 3437GRFR is a fire retardant expanded polypropylene.

PA66 impact modified

ARPRO® 3430GR is a expanded polypropylene.

Gujarat Petrosynthese is modifying and supplying of PP Polymers with a high grade of raw material using the latest technology as per customer specification. These Synofin (Modified PPCP) LA4703 GF15 polymers are modified with Flame Retardant, UV, Glass Fiber, Talc, etc.

Impact Modified Nylon Resin (PA66)

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.