Products in Other Automotive Applications: Bearings

Pentamid A GV30 H black is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Techno Compound PBT2 FR Natural (9984) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Thermec™ N 4340R35H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

Guarniflon G405/GLASS is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Rulon® 957 is a speckled green material that was developed specifically for noise dampening and abrasion resistance, such as in commercial or residential clothes dryers.It provides low friction operation on softer mating surfaces at higher loads than Rulon® J.This material also offers excellent performance on coated metals, particularly porcelain. Among its many benefits are an overall reduction of the weight of the finished product, vibration absorption, and cost reduction due to rapid manufacturing methods.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

Polifil® NYLON 6 provides superior strength and rigidity with electrical resistance and surface lubricity. These properties have been proven to work in the following applications: automotive, housings, bearings as well as appliances. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Solver Polyimide Polyimide Resin Composite 15% Molybdenum Disulfide can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instrument, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer sliding bearing, vacuum pump vane, valve seat gear and so on.

PBY Plastics PB40300R is a compression molded 40% glass fiber filled Poly(p-Phenylene Sulfide) (PPS).

Guarniflon G403/GLASS is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Vertec™ 1030 is a polymer and carbon fiber filled PTFE (polytetrafluorethylene) material. It is our proprietary low wearing PTFE material. This material has excellent elastic modulus and very low CTE for PTFE based materials. This material is specifically designed for dry running compressor sealing components and many other dry or demanding bearing applications where PTFE is deemed appropriate.

Pentamid L GV15 H black is a normal viscosity, 15% glass fiber reinforced polyamide 12, heat stabilized.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Pentamid B GV30 H black is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced.

Techno Compound PBT4 GF 30 Natural (9987) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

PBY Plastics PB10800T is a compression molded 40% bronze filled PolyTetraFluoroEthylene (PTFE).

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength Free of silicones, it possesses very low wear properties

INOFLON® M690 has fine particle size with narrow distribution and it is used in skived film and sheet compounding.

G.S.F. Plastics 1207 is a Carbon Fiber/Graphite/PTFE Lubricated Polyetheretherketone (PEEK).

Techno Compound PBT4 GF 20 LW Natural (9923) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Techno Compound PBT2 Natural (9998) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Vertec™ 1009 is a polymer filled PTFE (polytetrafluorethylene) material. It exhibits good sealability, creep resistance, very low coefficient of friction and low wear rate under dry running conditions. Its non-abrasive nature makes it an ideal sealing material for use against soft metal surfaces in dynamic applications. It is suitable for water and steam service, and therefore it is a good candidate where VERTEC 1011 is not acceptable.

Chengdu Letian Plastics LTP ZC-1150 for its high rigidity and excellent combination properties, PPS is ideal materials of automobile for light weight. For varied function of parts, PPS for automobile is required to have high rigidity, high stiffness, high toughness, resistance to abrasion, corrosion resistant, resistance to solvent, resistance to temperature leap, resistance to hot water creep deformation, easy to process and good dimensional stability. The structure materials, wear resistant materials, resistant materials, heat leap resistant materials, solvent resistant materials and precise molding materials developed by LETIAN Plastics can meet the increasing need of automobile industry.

Pentamid B GV15 GK15 H black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 15% glass bead reinforced.

FLUORONOID® FL 117 is a high Temperature Aromatic Polyester Filled PTFE.

Pentamid B S GV40 H natural is a low viscosity, heat stabilized polyamide 6, 40% glass fiber reinforced.

Pentamid AB S GV50 H black is a low viscosity, heat stabilized polyamide 66+6, 50% glass fiber reinforced.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

fluteck™ C200 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene

Exac ETFE is an Ethylene Tetrafluoroethylene Copolymer (ETFE) product. It is available in North America. Applications of Exac ETFE include engineering/industrial parts, aerospace, electrical/electronic applications, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Copolymer Heat Resistant Weather Resistant

Pentamid A GV35 HYD 1.1 black is a normal viscosity, heat and highly hydrolysis stabilized polyamide 66, 35% glass fiber reinforced.

Pentamid A GV30 H MOS non-colored is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, modified with mos2.

Pentamid AB GV15 H RC black is a normal viscosity, heat stabilized polyamide 66+6, 15% glass fiber reinforced, recompound.

Acetal-C + PTFE is a high-quality engineering plastic material.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified